A Microsoft Office (Excel, Word) forum. OfficeFrustration

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » OfficeFrustration forum » Microsoft Access » Running & Setting Up Queries
Site Map Home Register Authors List Search Today's Posts Mark Forums Read  

Union Query Access 2007 SP2 MSO



 
 
Thread Tools Display Modes
  #1  
Old May 20th, 2010, 12:56 PM posted to microsoft.public.access.queries
Bruce
external usenet poster
 
Posts: 374
Default Union Query Access 2007 SP2 MSO

I have a union query that keeps telling me that there is a data type
mismatch. When I first run the query everything is okay and it displays the
fields accordingly. Then using the record selector I tell it to go to the
last record. The query runs a little bit and then sends the error message
Data type mismatch in criteria expression. (Error 3464).

I have triple checked all the fields to make sure they are in the correct
order and have the correct data. I can run the query with any combination of
two queries and there is no problem. A check of the records reveals that each
query is compatible with the other. I have a Parts query with 44,905 records,
a Labor query with 49,956 records and a Sublets query with 11,239 records.
The only time I get the error is when I have three queries within the Union.
Parts and Sublet produce 561,144 records, Parts and Labor produce 94,861
records; Labor and Sublet produce 61,195 records all with no errors. My code
is listed below:

SELECT [WO Master Parts 03].BD, [WO Master Parts 03].Department, 1 AS
Segment, [WO Master Parts 03].WorkOrderUID, [WO Master Parts
03].WorkOrderNumber, [WO Master Parts 03].WOServiceUID, [WO Master Parts
03].Type, [WO Master Parts 03].NPD, [WO Master Parts 03].Total, [WO Master
Parts 03].Quantity, [WO Master Parts 03].StoreRoom, [WO Master Parts
03].PartNumber, Null AS StartDate, Null AS EndDate, Null AS HrTime
FROM [WO Master Parts 03]

UNION ALL SELECT [WO Master Labor 03].BD, [WO Master Labor 03].Department, 2
AS Segment, [WO Master Labor 03].WorkOrderUID, [WO Master Labor
03].WorkOrderNumber, [WO Master Labor 03].WOServiceUID, [WO Master Labor
03].Type, [WO Master Labor 03].NPD, [WO Master Labor 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, [WO Master Labor
03].StartDate, [WO Master Labor 03].EndDate, [WO Master Labor 03].HrTime
FROM [WO Master Labor 03]

UNION ALL SELECT [WO Master Sublet 03].BD, [WO Master Sublet 03].Department,
3 AS Segment, [WO Master Sublet 03].WorkOrderUID, [WO Master Sublet
03].WorkOrderNumber, [WO Master Sublet 03].WOServiceUID, [WO Master Sublet
03].Type, [WO Master Sublet 03].NPD, [WO Master Sublet 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, Null AS StartDate, Null AS
EndDate, Null AS HrTime
FROM [WO Master Sublet 03];

Can anyone assist me and tell me the error of my code?? Please

--
Bruce
  #2  
Old May 20th, 2010, 04:34 PM posted to microsoft.public.access.queries
Jerry Whittle
external usenet poster
 
Posts: 4,732
Default Union Query Access 2007 SP2 MSO

Are any of these field Memo datatypes? I've run into strange things with
corrupt memo fields before. If any are Memos, try removing those fields from
the SQL and see if the union query then works.

Actually that might be a good troubleshooting method for the rest of the
fields. Remove some of them and see what does or doesn't work.

Another thought would be to create a union query with just two of the
tables, which you say works, then create another union query based on this
plus the third table. You might try different combinations of this to see if
there is a problem with a particular table.
--
Jerry Whittle, Microsoft Access MVP
Light. Strong. Cheap. Pick two. Keith Bontrager - Bicycle Builder.


"Bruce" wrote:

I have a union query that keeps telling me that there is a data type
mismatch. When I first run the query everything is okay and it displays the
fields accordingly. Then using the record selector I tell it to go to the
last record. The query runs a little bit and then sends the error message
Data type mismatch in criteria expression. (Error 3464).

I have triple checked all the fields to make sure they are in the correct
order and have the correct data. I can run the query with any combination of
two queries and there is no problem. A check of the records reveals that each
query is compatible with the other. I have a Parts query with 44,905 records,
a Labor query with 49,956 records and a Sublets query with 11,239 records.
The only time I get the error is when I have three queries within the Union.
Parts and Sublet produce 561,144 records, Parts and Labor produce 94,861
records; Labor and Sublet produce 61,195 records all with no errors. My code
is listed below:

SELECT [WO Master Parts 03].BD, [WO Master Parts 03].Department, 1 AS
Segment, [WO Master Parts 03].WorkOrderUID, [WO Master Parts
03].WorkOrderNumber, [WO Master Parts 03].WOServiceUID, [WO Master Parts
03].Type, [WO Master Parts 03].NPD, [WO Master Parts 03].Total, [WO Master
Parts 03].Quantity, [WO Master Parts 03].StoreRoom, [WO Master Parts
03].PartNumber, Null AS StartDate, Null AS EndDate, Null AS HrTime
FROM [WO Master Parts 03]

UNION ALL SELECT [WO Master Labor 03].BD, [WO Master Labor 03].Department, 2
AS Segment, [WO Master Labor 03].WorkOrderUID, [WO Master Labor
03].WorkOrderNumber, [WO Master Labor 03].WOServiceUID, [WO Master Labor
03].Type, [WO Master Labor 03].NPD, [WO Master Labor 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, [WO Master Labor
03].StartDate, [WO Master Labor 03].EndDate, [WO Master Labor 03].HrTime
FROM [WO Master Labor 03]

UNION ALL SELECT [WO Master Sublet 03].BD, [WO Master Sublet 03].Department,
3 AS Segment, [WO Master Sublet 03].WorkOrderUID, [WO Master Sublet
03].WorkOrderNumber, [WO Master Sublet 03].WOServiceUID, [WO Master Sublet
03].Type, [WO Master Sublet 03].NPD, [WO Master Sublet 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, Null AS StartDate, Null AS
EndDate, Null AS HrTime
FROM [WO Master Sublet 03];

Can anyone assist me and tell me the error of my code?? Please

--
Bruce

  #3  
Old May 20th, 2010, 05:55 PM posted to microsoft.public.access.queries
Bruce
external usenet poster
 
Posts: 374
Default Union Query Access 2007 SP2 MSO

Jerry,

None of the fields are memo fields.

What I find strange is that any two combinations will run with no errors, it
is just when I add that third query is when it blows up?

I did try creating a union with two of the queries then writing a query
against the results of the union then tried to link the third query, same
results, would not work.

Is there a record limitation to a union query? I have another union query
that has three queries with no problem. This query I am attempting would be
over 100,000 records, do you think that might be a problem?

I am going to try and limit the size of the three query union to see if that
works.
--
Bruce


"Jerry Whittle" wrote:

Are any of these field Memo datatypes? I've run into strange things with
corrupt memo fields before. If any are Memos, try removing those fields from
the SQL and see if the union query then works.

Actually that might be a good troubleshooting method for the rest of the
fields. Remove some of them and see what does or doesn't work.

Another thought would be to create a union query with just two of the
tables, which you say works, then create another union query based on this
plus the third table. You might try different combinations of this to see if
there is a problem with a particular table.
--
Jerry Whittle, Microsoft Access MVP
Light. Strong. Cheap. Pick two. Keith Bontrager - Bicycle Builder.


"Bruce" wrote:

I have a union query that keeps telling me that there is a data type
mismatch. When I first run the query everything is okay and it displays the
fields accordingly. Then using the record selector I tell it to go to the
last record. The query runs a little bit and then sends the error message
Data type mismatch in criteria expression. (Error 3464).

I have triple checked all the fields to make sure they are in the correct
order and have the correct data. I can run the query with any combination of
two queries and there is no problem. A check of the records reveals that each
query is compatible with the other. I have a Parts query with 44,905 records,
a Labor query with 49,956 records and a Sublets query with 11,239 records.
The only time I get the error is when I have three queries within the Union.
Parts and Sublet produce 561,144 records, Parts and Labor produce 94,861
records; Labor and Sublet produce 61,195 records all with no errors. My code
is listed below:

SELECT [WO Master Parts 03].BD, [WO Master Parts 03].Department, 1 AS
Segment, [WO Master Parts 03].WorkOrderUID, [WO Master Parts
03].WorkOrderNumber, [WO Master Parts 03].WOServiceUID, [WO Master Parts
03].Type, [WO Master Parts 03].NPD, [WO Master Parts 03].Total, [WO Master
Parts 03].Quantity, [WO Master Parts 03].StoreRoom, [WO Master Parts
03].PartNumber, Null AS StartDate, Null AS EndDate, Null AS HrTime
FROM [WO Master Parts 03]

UNION ALL SELECT [WO Master Labor 03].BD, [WO Master Labor 03].Department, 2
AS Segment, [WO Master Labor 03].WorkOrderUID, [WO Master Labor
03].WorkOrderNumber, [WO Master Labor 03].WOServiceUID, [WO Master Labor
03].Type, [WO Master Labor 03].NPD, [WO Master Labor 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, [WO Master Labor
03].StartDate, [WO Master Labor 03].EndDate, [WO Master Labor 03].HrTime
FROM [WO Master Labor 03]

UNION ALL SELECT [WO Master Sublet 03].BD, [WO Master Sublet 03].Department,
3 AS Segment, [WO Master Sublet 03].WorkOrderUID, [WO Master Sublet
03].WorkOrderNumber, [WO Master Sublet 03].WOServiceUID, [WO Master Sublet
03].Type, [WO Master Sublet 03].NPD, [WO Master Sublet 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, Null AS StartDate, Null AS
EndDate, Null AS HrTime
FROM [WO Master Sublet 03];

Can anyone assist me and tell me the error of my code?? Please

--
Bruce

  #4  
Old May 20th, 2010, 06:08 PM posted to microsoft.public.access.queries
Jerry Whittle
external usenet poster
 
Posts: 4,732
Default Union Query Access 2007 SP2 MSO

Also on A2007, I just ran a simple union query on 3 tables that totaled
2,244,414 records with no problems. Going to the last record using the record
selector took a couple of minutes. These tables have 10 fields with various
data types.

SELECT * from cargo_tariff_backup
union all
SELECT * from cargo_tariff
union all
SELECT * from cargo_tariff2;

Maybe you should simplify the number of fields especially where you have to
insert the nulls and such.

Have you tried a compact and repair?
--
Jerry Whittle, Microsoft Access MVP
Light. Strong. Cheap. Pick two. Keith Bontrager - Bicycle Builder.


"Bruce" wrote:

Jerry,

None of the fields are memo fields.

What I find strange is that any two combinations will run with no errors, it
is just when I add that third query is when it blows up?

I did try creating a union with two of the queries then writing a query
against the results of the union then tried to link the third query, same
results, would not work.

Is there a record limitation to a union query? I have another union query
that has three queries with no problem. This query I am attempting would be
over 100,000 records, do you think that might be a problem?

I am going to try and limit the size of the three query union to see if that
works.
--
Bruce


"Jerry Whittle" wrote:

Are any of these field Memo datatypes? I've run into strange things with
corrupt memo fields before. If any are Memos, try removing those fields from
the SQL and see if the union query then works.

Actually that might be a good troubleshooting method for the rest of the
fields. Remove some of them and see what does or doesn't work.

Another thought would be to create a union query with just two of the
tables, which you say works, then create another union query based on this
plus the third table. You might try different combinations of this to see if
there is a problem with a particular table.
--
Jerry Whittle, Microsoft Access MVP
Light. Strong. Cheap. Pick two. Keith Bontrager - Bicycle Builder.


"Bruce" wrote:

I have a union query that keeps telling me that there is a data type
mismatch. When I first run the query everything is okay and it displays the
fields accordingly. Then using the record selector I tell it to go to the
last record. The query runs a little bit and then sends the error message
Data type mismatch in criteria expression. (Error 3464).

I have triple checked all the fields to make sure they are in the correct
order and have the correct data. I can run the query with any combination of
two queries and there is no problem. A check of the records reveals that each
query is compatible with the other. I have a Parts query with 44,905 records,
a Labor query with 49,956 records and a Sublets query with 11,239 records.
The only time I get the error is when I have three queries within the Union.
Parts and Sublet produce 561,144 records, Parts and Labor produce 94,861
records; Labor and Sublet produce 61,195 records all with no errors. My code
is listed below:

SELECT [WO Master Parts 03].BD, [WO Master Parts 03].Department, 1 AS
Segment, [WO Master Parts 03].WorkOrderUID, [WO Master Parts
03].WorkOrderNumber, [WO Master Parts 03].WOServiceUID, [WO Master Parts
03].Type, [WO Master Parts 03].NPD, [WO Master Parts 03].Total, [WO Master
Parts 03].Quantity, [WO Master Parts 03].StoreRoom, [WO Master Parts
03].PartNumber, Null AS StartDate, Null AS EndDate, Null AS HrTime
FROM [WO Master Parts 03]

UNION ALL SELECT [WO Master Labor 03].BD, [WO Master Labor 03].Department, 2
AS Segment, [WO Master Labor 03].WorkOrderUID, [WO Master Labor
03].WorkOrderNumber, [WO Master Labor 03].WOServiceUID, [WO Master Labor
03].Type, [WO Master Labor 03].NPD, [WO Master Labor 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, [WO Master Labor
03].StartDate, [WO Master Labor 03].EndDate, [WO Master Labor 03].HrTime
FROM [WO Master Labor 03]

UNION ALL SELECT [WO Master Sublet 03].BD, [WO Master Sublet 03].Department,
3 AS Segment, [WO Master Sublet 03].WorkOrderUID, [WO Master Sublet
03].WorkOrderNumber, [WO Master Sublet 03].WOServiceUID, [WO Master Sublet
03].Type, [WO Master Sublet 03].NPD, [WO Master Sublet 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, Null AS StartDate, Null AS
EndDate, Null AS HrTime
FROM [WO Master Sublet 03];

Can anyone assist me and tell me the error of my code?? Please

--
Bruce

  #5  
Old May 20th, 2010, 09:00 PM posted to microsoft.public.access.queries
Bruce
external usenet poster
 
Posts: 374
Default Union Query Access 2007 SP2 MSO

Jerry,

I think I found the problem: I removed the two fields StartDate and EndDate,
the query ran with no problems. Is the fact that Date is part of the field
name and date is a reserved word causing the problem?

In the morning I am going to rewrite the last queries and alias these two
fields and then try it again.

--
Bruce


"Jerry Whittle" wrote:

Also on A2007, I just ran a simple union query on 3 tables that totaled
2,244,414 records with no problems. Going to the last record using the record
selector took a couple of minutes. These tables have 10 fields with various
data types.

SELECT * from cargo_tariff_backup
union all
SELECT * from cargo_tariff
union all
SELECT * from cargo_tariff2;

Maybe you should simplify the number of fields especially where you have to
insert the nulls and such.

Have you tried a compact and repair?
--
Jerry Whittle, Microsoft Access MVP
Light. Strong. Cheap. Pick two. Keith Bontrager - Bicycle Builder.


"Bruce" wrote:

Jerry,

None of the fields are memo fields.

What I find strange is that any two combinations will run with no errors, it
is just when I add that third query is when it blows up?

I did try creating a union with two of the queries then writing a query
against the results of the union then tried to link the third query, same
results, would not work.

Is there a record limitation to a union query? I have another union query
that has three queries with no problem. This query I am attempting would be
over 100,000 records, do you think that might be a problem?

I am going to try and limit the size of the three query union to see if that
works.
--
Bruce


"Jerry Whittle" wrote:

Are any of these field Memo datatypes? I've run into strange things with
corrupt memo fields before. If any are Memos, try removing those fields from
the SQL and see if the union query then works.

Actually that might be a good troubleshooting method for the rest of the
fields. Remove some of them and see what does or doesn't work.

Another thought would be to create a union query with just two of the
tables, which you say works, then create another union query based on this
plus the third table. You might try different combinations of this to see if
there is a problem with a particular table.
--
Jerry Whittle, Microsoft Access MVP
Light. Strong. Cheap. Pick two. Keith Bontrager - Bicycle Builder.


"Bruce" wrote:

I have a union query that keeps telling me that there is a data type
mismatch. When I first run the query everything is okay and it displays the
fields accordingly. Then using the record selector I tell it to go to the
last record. The query runs a little bit and then sends the error message
Data type mismatch in criteria expression. (Error 3464).

I have triple checked all the fields to make sure they are in the correct
order and have the correct data. I can run the query with any combination of
two queries and there is no problem. A check of the records reveals that each
query is compatible with the other. I have a Parts query with 44,905 records,
a Labor query with 49,956 records and a Sublets query with 11,239 records.
The only time I get the error is when I have three queries within the Union.
Parts and Sublet produce 561,144 records, Parts and Labor produce 94,861
records; Labor and Sublet produce 61,195 records all with no errors. My code
is listed below:

SELECT [WO Master Parts 03].BD, [WO Master Parts 03].Department, 1 AS
Segment, [WO Master Parts 03].WorkOrderUID, [WO Master Parts
03].WorkOrderNumber, [WO Master Parts 03].WOServiceUID, [WO Master Parts
03].Type, [WO Master Parts 03].NPD, [WO Master Parts 03].Total, [WO Master
Parts 03].Quantity, [WO Master Parts 03].StoreRoom, [WO Master Parts
03].PartNumber, Null AS StartDate, Null AS EndDate, Null AS HrTime
FROM [WO Master Parts 03]

UNION ALL SELECT [WO Master Labor 03].BD, [WO Master Labor 03].Department, 2
AS Segment, [WO Master Labor 03].WorkOrderUID, [WO Master Labor
03].WorkOrderNumber, [WO Master Labor 03].WOServiceUID, [WO Master Labor
03].Type, [WO Master Labor 03].NPD, [WO Master Labor 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, [WO Master Labor
03].StartDate, [WO Master Labor 03].EndDate, [WO Master Labor 03].HrTime
FROM [WO Master Labor 03]

UNION ALL SELECT [WO Master Sublet 03].BD, [WO Master Sublet 03].Department,
3 AS Segment, [WO Master Sublet 03].WorkOrderUID, [WO Master Sublet
03].WorkOrderNumber, [WO Master Sublet 03].WOServiceUID, [WO Master Sublet
03].Type, [WO Master Sublet 03].NPD, [WO Master Sublet 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, Null AS StartDate, Null AS
EndDate, Null AS HrTime
FROM [WO Master Sublet 03];

Can anyone assist me and tell me the error of my code?? Please

--
Bruce

  #6  
Old May 20th, 2010, 09:34 PM posted to microsoft.public.access.queries
Jerry Whittle
external usenet poster
 
Posts: 4,732
Default Union Query Access 2007 SP2 MSO

It's not a reserved word problem. It would need to be a plain old Date
without brackets around it for that to happen. However your Type field could
be a problem!

http://support.microsoft.com/kb/286335/

You should double check that those fields are a Date/time data types.

Maybe insert a bogus date like #1/1/1950# instead of Null for those tables
without those fields. See if the mixture of nulls and actual dates is the
problem.
--
Jerry Whittle, Microsoft Access MVP
Light. Strong. Cheap. Pick two. Keith Bontrager - Bicycle Builder.


"Bruce" wrote:

Jerry,

I think I found the problem: I removed the two fields StartDate and EndDate,
the query ran with no problems. Is the fact that Date is part of the field
name and date is a reserved word causing the problem?

In the morning I am going to rewrite the last queries and alias these two
fields and then try it again.

--
Bruce


"Jerry Whittle" wrote:

Also on A2007, I just ran a simple union query on 3 tables that totaled
2,244,414 records with no problems. Going to the last record using the record
selector took a couple of minutes. These tables have 10 fields with various
data types.

SELECT * from cargo_tariff_backup
union all
SELECT * from cargo_tariff
union all
SELECT * from cargo_tariff2;

Maybe you should simplify the number of fields especially where you have to
insert the nulls and such.

Have you tried a compact and repair?
--
Jerry Whittle, Microsoft Access MVP
Light. Strong. Cheap. Pick two. Keith Bontrager - Bicycle Builder.


"Bruce" wrote:

Jerry,

None of the fields are memo fields.

What I find strange is that any two combinations will run with no errors, it
is just when I add that third query is when it blows up?

I did try creating a union with two of the queries then writing a query
against the results of the union then tried to link the third query, same
results, would not work.

Is there a record limitation to a union query? I have another union query
that has three queries with no problem. This query I am attempting would be
over 100,000 records, do you think that might be a problem?

I am going to try and limit the size of the three query union to see if that
works.
--
Bruce


"Jerry Whittle" wrote:

Are any of these field Memo datatypes? I've run into strange things with
corrupt memo fields before. If any are Memos, try removing those fields from
the SQL and see if the union query then works.

Actually that might be a good troubleshooting method for the rest of the
fields. Remove some of them and see what does or doesn't work.

Another thought would be to create a union query with just two of the
tables, which you say works, then create another union query based on this
plus the third table. You might try different combinations of this to see if
there is a problem with a particular table.
--
Jerry Whittle, Microsoft Access MVP
Light. Strong. Cheap. Pick two. Keith Bontrager - Bicycle Builder.


"Bruce" wrote:

I have a union query that keeps telling me that there is a data type
mismatch. When I first run the query everything is okay and it displays the
fields accordingly. Then using the record selector I tell it to go to the
last record. The query runs a little bit and then sends the error message
Data type mismatch in criteria expression. (Error 3464).

I have triple checked all the fields to make sure they are in the correct
order and have the correct data. I can run the query with any combination of
two queries and there is no problem. A check of the records reveals that each
query is compatible with the other. I have a Parts query with 44,905 records,
a Labor query with 49,956 records and a Sublets query with 11,239 records.
The only time I get the error is when I have three queries within the Union.
Parts and Sublet produce 561,144 records, Parts and Labor produce 94,861
records; Labor and Sublet produce 61,195 records all with no errors. My code
is listed below:

SELECT [WO Master Parts 03].BD, [WO Master Parts 03].Department, 1 AS
Segment, [WO Master Parts 03].WorkOrderUID, [WO Master Parts
03].WorkOrderNumber, [WO Master Parts 03].WOServiceUID, [WO Master Parts
03].Type, [WO Master Parts 03].NPD, [WO Master Parts 03].Total, [WO Master
Parts 03].Quantity, [WO Master Parts 03].StoreRoom, [WO Master Parts
03].PartNumber, Null AS StartDate, Null AS EndDate, Null AS HrTime
FROM [WO Master Parts 03]

UNION ALL SELECT [WO Master Labor 03].BD, [WO Master Labor 03].Department, 2
AS Segment, [WO Master Labor 03].WorkOrderUID, [WO Master Labor
03].WorkOrderNumber, [WO Master Labor 03].WOServiceUID, [WO Master Labor
03].Type, [WO Master Labor 03].NPD, [WO Master Labor 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, [WO Master Labor
03].StartDate, [WO Master Labor 03].EndDate, [WO Master Labor 03].HrTime
FROM [WO Master Labor 03]

UNION ALL SELECT [WO Master Sublet 03].BD, [WO Master Sublet 03].Department,
3 AS Segment, [WO Master Sublet 03].WorkOrderUID, [WO Master Sublet
03].WorkOrderNumber, [WO Master Sublet 03].WOServiceUID, [WO Master Sublet
03].Type, [WO Master Sublet 03].NPD, [WO Master Sublet 03].Total, Null AS
Quantity, Null AS StoreRoom, Null AS PartNumber, Null AS StartDate, Null AS
EndDate, Null AS HrTime
FROM [WO Master Sublet 03];

Can anyone assist me and tell me the error of my code?? Please

--
Bruce

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 12:40 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 OfficeFrustration.
The comments are property of their posters.