If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
business cards in publisher
I am trying to make business cards in Publisher 2000 using Avery 8371. First
of all, there is no option for that template, and secondly I cannot find anopther one that works. The cards are too high or too low when they print, and they do not cover the whole card. I have been working with this for days and cannot seem to amke any progress. Does ANYBODY have any helpful suggestions? I have tried following instruction included in Avery, but it makes no difference. |
#2
|
|||
|
|||
business cards in publisher
Go to http://www.avery.com and download free software that prints to Avery
blanks really quite well.. -- Mike Hall MVP - Windows Shell/User "Piano player" Piano wrote in message ... I am trying to make business cards in Publisher 2000 using Avery 8371. First of all, there is no option for that template, and secondly I cannot find anopther one that works. The cards are too high or too low when they print, and they do not cover the whole card. I have been working with this for days and cannot seem to amke any progress. Does ANYBODY have any helpful suggestions? I have tried following instruction included in Avery, but it makes no difference. |
#3
|
|||
|
|||
business cards in publisher
Thanks for the tips. That was one of the first things I did.
"Mike Hall (MS-MVP)" wrote: Go to http://www.avery.com and download free software that prints to Avery blanks really quite well.. -- Mike Hall MVP - Windows Shell/User "Piano player" Piano wrote in message ... I am trying to make business cards in Publisher 2000 using Avery 8371. First of all, there is no option for that template, and secondly I cannot find anopther one that works. The cards are too high or too low when they print, and they do not cover the whole card. I have been working with this for days and cannot seem to amke any progress. Does ANYBODY have any helpful suggestions? I have tried following instruction included in Avery, but it makes no difference. |
#4
|
|||
|
|||
business cards in publisher
These are the standard 2 x 3.5 cards.
Page setup, special size, business cards. When you are finished creating your card, print, page options button, custom options button, set your side margin to .75 your top margin to .5 and the gaps to zero... -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Piano player" Piano wrote in message ... I am trying to make business cards in Publisher 2000 using Avery 8371. First of all, there is no option for that template, and secondly I cannot find anopther one that works. The cards are too high or too low when they print, and they do not cover the whole card. I have been working with this for days and cannot seem to amke any progress. Does ANYBODY have any helpful suggestions? I have tried following instruction included in Avery, but it makes no difference. |
#5
|
|||
|
|||
business cards in publisher
Is your card the same size as the
perforated area on the Avery stock? I'm thinking...3.5x2? Go to...File / Page Setup to be sure...also select... Portrait as your Page orientation. When you go to...File / Print...have you tried adjusting the position of the cards by going to...Page Options / Print Multiple / Custom Options? Here's a good place to begin... In the Side Margin box, type 0.75". In the Top Margin box, type 0.5". In the Horizontal Gap box, type 0.0". In the Vertical Gap box, type 0.0" -- John Inzer "Piano player" wrote in message ... Thanks for the tips. That was one of the first things I did. "Mike Hall (MS-MVP)" wrote: Go to http://www.avery.com and download free software that prints to Avery blanks really quite well.. -- Mike Hall MVP - Windows Shell/User "Piano player" Piano wrote in message ... I am trying to make business cards in Publisher 2000 using Avery 8371. First of all, there is no option for that template, and secondly I cannot find anopther one that works. The cards are too high or too low when they print, and they do not cover the whole card. I have been working with this for days and cannot seem to amke any progress. Does ANYBODY have any helpful suggestions? I have tried following instruction included in Avery, but it makes no difference. |
#6
|
|||
|
|||
business cards in publisher
I'm still having to make adjustments. So far, I'm on my third
run...adjusting by tiny bits. It's getting better, but since I have a graphic, I'm wasting ink.Once I get it set, I'll be ok. I'll be sure to post my margins for someone else who may have the same problem. Is this a Publisher or Avery issue? "Mary Sauer" wrote: These are the standard 2 x 3.5 cards. Page setup, special size, business cards. When you are finished creating your card, print, page options button, custom options button, set your side margin to .75 your top margin to .5 and the gaps to zero... -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Piano player" Piano wrote in message ... I am trying to make business cards in Publisher 2000 using Avery 8371. First of all, there is no option for that template, and secondly I cannot find anopther one that works. The cards are too high or too low when they print, and they do not cover the whole card. I have been working with this for days and cannot seem to amke any progress. Does ANYBODY have any helpful suggestions? I have tried following instruction included in Avery, but it makes no difference. |
#7
|
|||
|
|||
business cards in publisher
UPDATE: If you set the top margin at .65 it's not far enough down, so as you
go down the page, the cards are printed closer to the top edge. Set it at ..70 and the last card loses it's border. Can anyone explain why this is such a challenge to setup? "Piano player" wrote: I'm still having to make adjustments. So far, I'm on my third run...adjusting by tiny bits. It's getting better, but since I have a graphic, I'm wasting ink.Once I get it set, I'll be ok. I'll be sure to post my margins for someone else who may have the same problem. Is this a Publisher or Avery issue? "Mary Sauer" wrote: These are the standard 2 x 3.5 cards. Page setup, special size, business cards. When you are finished creating your card, print, page options button, custom options button, set your side margin to .75 your top margin to .5 and the gaps to zero... -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Piano player" Piano wrote in message ... I am trying to make business cards in Publisher 2000 using Avery 8371. First of all, there is no option for that template, and secondly I cannot find anopther one that works. The cards are too high or too low when they print, and they do not cover the whole card. I have been working with this for days and cannot seem to amke any progress. Does ANYBODY have any helpful suggestions? I have tried following instruction included in Avery, but it makes no difference. |
#8
|
|||
|
|||
business cards in publisher
Piano player was very recently
heard to utter: UPDATE: If you set the top margin at .65 it's not far enough down, so as you go down the page, the cards are printed closer to the top edge. Set it at .70 and the last card loses it's border. Can anyone explain why this is such a challenge to setup? If the difference gets more and more as you go further down the page, the error is not with the top margin, but with either the card height of the vertical gap. It sounds like your printer has paper feed issues. -- Ed Bennett - MVP Microsoft Publisher |
#9
|
|||
|
|||
business cards in publisher
This is not a Publisher issue. Your printer is feeding the stock incorrectly. Do you
have a lever on your printer for heavier stock? Every business card with the standard dimensions will print correctly with the measurements 2 x 3.5. Check out your printer roller. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Piano player" wrote in message ... UPDATE: If you set the top margin at .65 it's not far enough down, so as you go down the page, the cards are printed closer to the top edge. Set it at .70 and the last card loses it's border. Can anyone explain why this is such a challenge to setup? "Piano player" wrote: I'm still having to make adjustments. So far, I'm on my third run...adjusting by tiny bits. It's getting better, but since I have a graphic, I'm wasting ink.Once I get it set, I'll be ok. I'll be sure to post my margins for someone else who may have the same problem. Is this a Publisher or Avery issue? "Mary Sauer" wrote: These are the standard 2 x 3.5 cards. Page setup, special size, business cards. When you are finished creating your card, print, page options button, custom options button, set your side margin to .75 your top margin to .5 and the gaps to zero... -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Piano player" Piano wrote in message ... I am trying to make business cards in Publisher 2000 using Avery 8371. First of all, there is no option for that template, and secondly I cannot find anopther one that works. The cards are too high or too low when they print, and they do not cover the whole card. I have been working with this for days and cannot seem to amke any progress. Does ANYBODY have any helpful suggestions? I have tried following instruction included in Avery, but it makes no difference. |
#10
|
|||
|
|||
business cards in publisher
Paper feed problems? Please understand that I have been printing on plain
paper first, then comparing to the template included with the cards. There has to be another reason. if i change the vertical gap, that will not correct the problem consistenly down the page. "Mary Sauer" wrote: This is not a Publisher issue. Your printer is feeding the stock incorrectly. Do you have a lever on your printer for heavier stock? Every business card with the standard dimensions will print correctly with the measurements 2 x 3.5. Check out your printer roller. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Piano player" wrote in message ... UPDATE: If you set the top margin at .65 it's not far enough down, so as you go down the page, the cards are printed closer to the top edge. Set it at .70 and the last card loses it's border. Can anyone explain why this is such a challenge to setup? "Piano player" wrote: I'm still having to make adjustments. So far, I'm on my third run...adjusting by tiny bits. It's getting better, but since I have a graphic, I'm wasting ink.Once I get it set, I'll be ok. I'll be sure to post my margins for someone else who may have the same problem. Is this a Publisher or Avery issue? "Mary Sauer" wrote: These are the standard 2 x 3.5 cards. Page setup, special size, business cards. When you are finished creating your card, print, page options button, custom options button, set your side margin to .75 your top margin to .5 and the gaps to zero... -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Piano player" Piano wrote in message ... I am trying to make business cards in Publisher 2000 using Avery 8371. First of all, there is no option for that template, and secondly I cannot find anopther one that works. The cards are too high or too low when they print, and they do not cover the whole card. I have been working with this for days and cannot seem to amke any progress. Does ANYBODY have any helpful suggestions? I have tried following instruction included in Avery, but it makes no difference. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Business Cards with different photos | allstar | General Discussions | 4 | September 8th, 2005 09:09 PM |
I've created business cards (Word 97 format); how can I print? | Lisa Halverson | General Discussions | 1 | August 30th, 2005 11:54 PM |
PRINTING BUSINESS CARDS IN MICROSOFT PUBLISHER | JAN | Publisher | 3 | December 10th, 2004 03:23 AM |
How do I print business cards in MS Publisher using Avery 5371 c. | Tribal Planner | Publisher | 1 | September 9th, 2004 07:21 PM |
2 GB too large? | Matthias Vering | Publisher | 18 | July 21st, 2004 03:14 AM |