If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Nag message on excel installation with Vista
Have installed my trusty Office XP onto a new laptop running Windows Vista.
When I open Excel I get the meassage "Compile error in hidden module: AutoExecNew" When I close Excel I get the message "Compile error in hidden module: DistMon" As far as I can ascertain, Excel is working OK. Anyone got any ideas as to wha my problem is & what I can do about it? Regards Philip |
#2
|
|||
|
|||
Nag message on excel installation with Vista
Coincidence with Vista:
Take a look he http://support.microsoft.com/default...;EN-US;q307410 OFF: "Compile Error in Hidden Module" Error Message When You Start Word or Excel It points at PDFMaker.xla as being the culprit. If you move/delete that addin, you should be ok. Philip Reece-Heal wrote: Have installed my trusty Office XP onto a new laptop running Windows Vista. When I open Excel I get the meassage "Compile error in hidden module: AutoExecNew" When I close Excel I get the message "Compile error in hidden module: DistMon" As far as I can ascertain, Excel is working OK. Anyone got any ideas as to wha my problem is & what I can do about it? Regards Philip -- Dave Peterson |
#3
|
|||
|
|||
Nag message on excel installation with Vista
Thanks Dave
Advice looked god. Found and deleted the .xla file you pointed at and searched for other ocurences: none. However, I still get the same problem. I do have Norto Antivirus but hat was update yesterday. Any other ideas? Thanks again Philip "Dave Peterson" wrote in message ... Coincidence with Vista: Take a look he http://support.microsoft.com/default...;EN-US;q307410 OFF: "Compile Error in Hidden Module" Error Message When You Start Word or Excel It points at PDFMaker.xla as being the culprit. If you move/delete that addin, you should be ok. Philip Reece-Heal wrote: Have installed my trusty Office XP onto a new laptop running Windows Vista. When I open Excel I get the meassage "Compile error in hidden module: AutoExecNew" When I close Excel I get the message "Compile error in hidden module: DistMon" As far as I can ascertain, Excel is working OK. Anyone got any ideas as to wha my problem is & what I can do about it? Regards Philip -- Dave Peterson |
#4
|
|||
|
|||
Nag message on excel installation with Vista
Keep looking. I bet you missed one of the locations of that addin.
Or... Maybe the name changed in different versions? I'd look for pdf*.xla, then *.xla. Remember to look in hidden folders, too. And maybe an old DOS command would help (I don't know if it'll work in Vista, though): Start|Run (is there such a thing??) CMD (to get to the Command prompt) cd\ (to get to the root directory) dir pdf*.xla /s or dir *.xla /s The /s says to search subfolders, too. Philip Reece-Heal wrote: Thanks Dave Advice looked god. Found and deleted the .xla file you pointed at and searched for other ocurences: none. However, I still get the same problem. I do have Norto Antivirus but hat was update yesterday. Any other ideas? Thanks again Philip "Dave Peterson" wrote in message ... Coincidence with Vista: Take a look he http://support.microsoft.com/default...;EN-US;q307410 OFF: "Compile Error in Hidden Module" Error Message When You Start Word or Excel It points at PDFMaker.xla as being the culprit. If you move/delete that addin, you should be ok. Philip Reece-Heal wrote: Have installed my trusty Office XP onto a new laptop running Windows Vista. When I open Excel I get the meassage "Compile error in hidden module: AutoExecNew" When I close Excel I get the message "Compile error in hidden module: DistMon" As far as I can ascertain, Excel is working OK. Anyone got any ideas as to wha my problem is & what I can do about it? Regards Philip -- Dave Peterson -- Dave Peterson |
#5
|
|||
|
|||
Nag message on excel installation with Vista
Philip, take a look at
http://www.onlinecomputertips.com/of...ile_error.html Bob Flanagan Macro Systems http://www.add-ins.com Productivity add-ins and downloadable books on VB macros for Excel "Philip Reece-Heal" wrote in message ... Have installed my trusty Office XP onto a new laptop running Windows Vista. When I open Excel I get the meassage "Compile error in hidden module: AutoExecNew" When I close Excel I get the message "Compile error in hidden module: DistMon" As far as I can ascertain, Excel is working OK. Anyone got any ideas as to wha my problem is & what I can do about it? Regards Philip |
#6
|
|||
|
|||
Nag message on excel installation with Vista
Dave
You are a star. The old ways are still the best; lovely to use the command prompt again and lo and beld it found another copy of that pdf file. No more nag screens in Excel now. Havn't found Start/Run in Vista but the comand prompt can be accessed frm Start/AllProgrames/Accessories.. Thanks again for your help and patience Philip PS apologies for not replying sooner "Dave Peterson" wrote in message ... Keep looking. I bet you missed one of the locations of that addin. Or... Maybe the name changed in different versions? I'd look for pdf*.xla, then *.xla. Remember to look in hidden folders, too. And maybe an old DOS command would help (I don't know if it'll work in Vista, though): Start|Run (is there such a thing??) CMD (to get to the Command prompt) cd\ (to get to the root directory) dir pdf*.xla /s or dir *.xla /s The /s says to search subfolders, too. Philip Reece-Heal wrote: Thanks Dave Advice looked god. Found and deleted the .xla file you pointed at and searched for other ocurences: none. However, I still get the same problem. I do have Norto Antivirus but hat was update yesterday. Any other ideas? Thanks again Philip "Dave Peterson" wrote in message ... Coincidence with Vista: Take a look he http://support.microsoft.com/default...;EN-US;q307410 OFF: "Compile Error in Hidden Module" Error Message When You Start Word or Excel It points at PDFMaker.xla as being the culprit. If you move/delete that addin, you should be ok. Philip Reece-Heal wrote: Have installed my trusty Office XP onto a new laptop running Windows Vista. When I open Excel I get the meassage "Compile error in hidden module: AutoExecNew" When I close Excel I get the message "Compile error in hidden module: DistMon" As far as I can ascertain, Excel is working OK. Anyone got any ideas as to wha my problem is & what I can do about it? Regards Philip -- Dave Peterson -- Dave Peterson |
#7
|
|||
|
|||
Nag message on excel installation with Vista
In WinXP, I can hold the flying-windows key and hit the r key to bring up the
Run dialog. Flying-windows e is windows explorer flying-windows d is the desktop flying-windows m minimizes everything (like flying-windows d) flying-windows shift-m (capital M) puts things back (I'm too lazy to load the virtual pc that has vista on it!) Philip Reece-Heal wrote: Dave You are a star. The old ways are still the best; lovely to use the command prompt again and lo and beld it found another copy of that pdf file. No more nag screens in Excel now. Havn't found Start/Run in Vista but the comand prompt can be accessed frm Start/AllProgrames/Accessories.. Thanks again for your help and patience Philip PS apologies for not replying sooner "Dave Peterson" wrote in message ... Keep looking. I bet you missed one of the locations of that addin. Or... Maybe the name changed in different versions? I'd look for pdf*.xla, then *.xla. Remember to look in hidden folders, too. And maybe an old DOS command would help (I don't know if it'll work in Vista, though): Start|Run (is there such a thing??) CMD (to get to the Command prompt) cd\ (to get to the root directory) dir pdf*.xla /s or dir *.xla /s The /s says to search subfolders, too. Philip Reece-Heal wrote: Thanks Dave Advice looked god. Found and deleted the .xla file you pointed at and searched for other ocurences: none. However, I still get the same problem. I do have Norto Antivirus but hat was update yesterday. Any other ideas? Thanks again Philip "Dave Peterson" wrote in message ... Coincidence with Vista: Take a look he http://support.microsoft.com/default...;EN-US;q307410 OFF: "Compile Error in Hidden Module" Error Message When You Start Word or Excel It points at PDFMaker.xla as being the culprit. If you move/delete that addin, you should be ok. Philip Reece-Heal wrote: Have installed my trusty Office XP onto a new laptop running Windows Vista. When I open Excel I get the meassage "Compile error in hidden module: AutoExecNew" When I close Excel I get the message "Compile error in hidden module: DistMon" As far as I can ascertain, Excel is working OK. Anyone got any ideas as to wha my problem is & what I can do about it? Regards Philip -- Dave Peterson -- Dave Peterson -- Dave Peterson |
#8
|
|||
|
|||
Nag message on excel installation with Vista
And flying-windows f is windows search/Find.
Dave Peterson wrote: In WinXP, I can hold the flying-windows key and hit the r key to bring up the Run dialog. Flying-windows e is windows explorer flying-windows d is the desktop flying-windows m minimizes everything (like flying-windows d) flying-windows shift-m (capital M) puts things back (I'm too lazy to load the virtual pc that has vista on it!) Philip Reece-Heal wrote: Dave You are a star. The old ways are still the best; lovely to use the command prompt again and lo and beld it found another copy of that pdf file. No more nag screens in Excel now. Havn't found Start/Run in Vista but the comand prompt can be accessed frm Start/AllProgrames/Accessories.. Thanks again for your help and patience Philip PS apologies for not replying sooner "Dave Peterson" wrote in message ... Keep looking. I bet you missed one of the locations of that addin. Or... Maybe the name changed in different versions? I'd look for pdf*.xla, then *.xla. Remember to look in hidden folders, too. And maybe an old DOS command would help (I don't know if it'll work in Vista, though): Start|Run (is there such a thing??) CMD (to get to the Command prompt) cd\ (to get to the root directory) dir pdf*.xla /s or dir *.xla /s The /s says to search subfolders, too. Philip Reece-Heal wrote: Thanks Dave Advice looked god. Found and deleted the .xla file you pointed at and searched for other ocurences: none. However, I still get the same problem. I do have Norto Antivirus but hat was update yesterday. Any other ideas? Thanks again Philip "Dave Peterson" wrote in message ... Coincidence with Vista: Take a look he http://support.microsoft.com/default...;EN-US;q307410 OFF: "Compile Error in Hidden Module" Error Message When You Start Word or Excel It points at PDFMaker.xla as being the culprit. If you move/delete that addin, you should be ok. Philip Reece-Heal wrote: Have installed my trusty Office XP onto a new laptop running Windows Vista. When I open Excel I get the meassage "Compile error in hidden module: AutoExecNew" When I close Excel I get the message "Compile error in hidden module: DistMon" As far as I can ascertain, Excel is working OK. Anyone got any ideas as to wha my problem is & what I can do about it? Regards Philip -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
#9
|
|||
|
|||
Nag message on excel installation with Vista
And flying-windows u - brings up the Utility manager, for Magnifier,
Narrator and On-screen keyboard flying-windows l - Logs the current user off -- Regards Roger Govier "Dave Peterson" wrote in message ... And flying-windows f is windows search/Find. Dave Peterson wrote: In WinXP, I can hold the flying-windows key and hit the r key to bring up the Run dialog. Flying-windows e is windows explorer flying-windows d is the desktop flying-windows m minimizes everything (like flying-windows d) flying-windows shift-m (capital M) puts things back (I'm too lazy to load the virtual pc that has vista on it!) Philip Reece-Heal wrote: Dave You are a star. The old ways are still the best; lovely to use the command prompt again and lo and beld it found another copy of that pdf file. No more nag screens in Excel now. Havn't found Start/Run in Vista but the comand prompt can be accessed frm Start/AllProgrames/Accessories.. Thanks again for your help and patience Philip PS apologies for not replying sooner "Dave Peterson" wrote in message ... Keep looking. I bet you missed one of the locations of that addin. Or... Maybe the name changed in different versions? I'd look for pdf*.xla, then *.xla. Remember to look in hidden folders, too. And maybe an old DOS command would help (I don't know if it'll work in Vista, though): Start|Run (is there such a thing??) CMD (to get to the Command prompt) cd\ (to get to the root directory) dir pdf*.xla /s or dir *.xla /s The /s says to search subfolders, too. Philip Reece-Heal wrote: Thanks Dave Advice looked god. Found and deleted the .xla file you pointed at and searched for other ocurences: none. However, I still get the same problem. I do have Norto Antivirus but hat was update yesterday. Any other ideas? Thanks again Philip "Dave Peterson" wrote in message ... Coincidence with Vista: Take a look he http://support.microsoft.com/default...;EN-US;q307410 OFF: "Compile Error in Hidden Module" Error Message When You Start Word or Excel It points at PDFMaker.xla as being the culprit. If you move/delete that addin, you should be ok. Philip Reece-Heal wrote: Have installed my trusty Office XP onto a new laptop running Windows Vista. When I open Excel I get the meassage "Compile error in hidden module: AutoExecNew" When I close Excel I get the message "Compile error in hidden module: DistMon" As far as I can ascertain, Excel is working OK. Anyone got any ideas as to wha my problem is & what I can do about it? Regards Philip -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Thread Tools | |
Display Modes | |
|
|