Changing page number

Hello,

I am preparing a 100+ pages document and I will need to insert a 20 page
document as annex1, from page 70 to 90. The main document will have pages 90
to 100.

The easy way to manage TOC and page numbers is to print 20 blank pages. I am
looking for a better solution.

I want to create a footer like Page xx of YY. at page 69, I will have page
69 of 100.

I want my next page to be page 80 of 100. I do not want to change section
and say start at 80 as the first portion of the document may change. It may
be page 83 tomorrow.

I have tried Page {{page}+20} of {{numpages}+20} but then my TOC is not
correct.

I would like to have something like Pageref=pageref+20 so my TOC is correct

Any suggestions?

Thanks

Hi Denis,

One way to control your TOC's page numbering would be to use section breaks,
and format the numbering in each to start page numbering at the number you
want. You'll have to unlink whichever of the header or footer you've got
your page numbers in for this to work. This approach can be a bit limiting,
though, if the number of pages in your annexure are liable to change, since
you'd then have to re-set the following section's starting page number.

An alternative is to simply use an INCLUDETEXT field to import your annexure
into the main document at the point you want, whether with or without
section breaks. If you do this, your document can take care of the page
numbering automatically - the most you might need to do from time to time is
to position the cursor somewhere in the imported area and press F9 to update
the link. The need to do that can be minimised by checking the 'update
automatic links at open' option under Tools|Options|General and the 'update
links' option under Tools|Options|Print.

Cheers


"Denis Levesque" Denis wrote in message
news
Hello,

I am preparing a 100+ pages document and I will need to insert a 20 page
document as annex1, from page 70 to 90. The main document will have pages
90
to 100.

The easy way to manage TOC and page numbers is to print 20 blank pages. I
am
looking for a better solution.

I want to create a footer like Page xx of YY. at page 69, I will have page
69 of 100.

I want my next page to be page 80 of 100. I do not want to change section
and say start at 80 as the first portion of the document may change. It
may
be page 83 tomorrow.

I have tried Page {{page}+20} of {{numpages}+20} but then my TOC is not
correct.

I would like to have something like Pageref=pageref+20 so my TOC is
correct

Any suggestions?

Thanks

Macropod,

Thanks for your answer.

I did use section breaks. I was wondering if there was another way of
changing the page number. The first page number of the document I want to
insert will vary depending on the sections before. If I enter the "start page
" at 70 and then I add another page in the previous sections, my page numbers
will be wrong.

If there is no way to do this, I guess my best bet is to put the formulla in
my page numbers and change the page numbers in my TOC before the final print
of my document. This way, I will need to change only one page of my document
and not the sections I need to change the page numbers.

Thanks.

"macropod" wrote:

Hi Denis,

One way to control your TOC's page numbering would be to use section breaks,
and format the numbering in each to start page numbering at the number you
want. You'll have to unlink whichever of the header or footer you've got
your page numbers in for this to work. This approach can be a bit limiting,
though, if the number of pages in your annexure are liable to change, since
you'd then have to re-set the following section's starting page number.

An alternative is to simply use an INCLUDETEXT field to import your annexure
into the main document at the point you want, whether with or without
section breaks. If you do this, your document can take care of the page
numbering automatically - the most you might need to do from time to time is
to position the cursor somewhere in the imported area and press F9 to update
the link. The need to do that can be minimised by checking the 'update
automatic links at open' option under Tools|Options|General and the 'update
links' option under Tools|Options|Print.

Cheers


"Denis Levesque" Denis wrote in message
news
Hello,

I am preparing a 100+ pages document and I will need to insert a 20 page
document as annex1, from page 70 to 90. The main document will have pages
90
to 100.

The easy way to manage TOC and page numbers is to print 20 blank pages. I
am
looking for a better solution.

I want to create a footer like Page xx of YY. at page 69, I will have page
69 of 100.

I want my next page to be page 80 of 100. I do not want to change section
and say start at 80 as the first portion of the document may change. It
may
be page 83 tomorrow.

I have tried Page {{page}+20} of {{numpages}+20} but then my TOC is not
correct.

I would like to have something like Pageref=pageref+20 so my TOC is
correct

Any suggestions?

Thanks

Hi Denis,

My preference would be to import the annexure as a linked file - Insert|File
and check the 'link' option. This creates a link via an INCLUDETEXT field.
This way, your TOC will take care of itself.

Another option would be to create your own TOC using cross-references to the
various headings that you want to appear in the TOC. You'd use two such
cross-references for each heading - one to get the text and one to get the
page reference. As you've already noted, the problem is how to deal with
changes if you add/delete pages in the first section. One way would be to
insert a SECTIONPAGES field into the first section, and bookmark it. If you
embed the SECTIONPAGES field in a SET field, the SECTIONPAGES field won't
even be visible. Coding would be something like:
{SET PageCount {SECTIONPAGES}}
In your TOC, the page reference fields will be coded something like:
{PAGEREF _12345}
For the pages to appear after your annexure, you could convert these to
formulae as follows:
(={PAGEREF _12345}+PageCount+20}
That will take care of the changing page count in the first section, with
the '20' representing the number of pages in your annexure. If you want to
accommodate the possibility of the page count in your annexure changing,
you'll once again be dealing with an INCLUDETEXT field, but this time it'll
need to refer to a bookmarked NUMPAGES field in that document, perhaps coded
like:
{SET AnnexPages {NUMPAGES}}
and the page calculation formula coded like:
(={PAGEREF _12345}+PageCount+{INCLUDETEXT "C:/My Documents/Annexure.doc"
AnnexPages}}

Are your eyes watering yet?

Cheers


"Denis Levesque" wrote in message
...
Macropod,

Thanks for your answer.

I did use section breaks. I was wondering if there was another way of
changing the page number. The first page number of the document I want to
insert will vary depending on the sections before. If I enter the "start
page
" at 70 and then I add another page in the previous sections, my page
numbers
will be wrong.

If there is no way to do this, I guess my best bet is to put the formulla
in
my page numbers and change the page numbers in my TOC before the final
print
of my document. This way, I will need to change only one page of my
document
and not the sections I need to change the page numbers.

Thanks.

"macropod" wrote:

Hi Denis,

One way to control your TOC's page numbering would be to use section
breaks,
and format the numbering in each to start page numbering at the number
you
want. You'll have to unlink whichever of the header or footer you've got
your page numbers in for this to work. This approach can be a bit
limiting,
though, if the number of pages in your annexure are liable to change,
since
you'd then have to re-set the following section's starting page number.

An alternative is to simply use an INCLUDETEXT field to import your
annexure
into the main document at the point you want, whether with or without
section breaks. If you do this, your document can take care of the page
numbering automatically - the most you might need to do from time to
time is
to position the cursor somewhere in the imported area and press F9 to
update
the link. The need to do that can be minimised by checking the 'update
automatic links at open' option under Tools|Options|General and the
'update
links' option under Tools|Options|Print.

Cheers


"Denis Levesque" Denis wrote in
message
news
Hello,

I am preparing a 100+ pages document and I will need to insert a 20
page
document as annex1, from page 70 to 90. The main document will have
pages
90
to 100.

The easy way to manage TOC and page numbers is to print 20 blank
pages. I
am
looking for a better solution.

I want to create a footer like Page xx of YY. at page 69, I will have
page
69 of 100.

I want my next page to be page 80 of 100. I do not want to change
section
and say start at 80 as the first portion of the document may change.
It
may
be page 83 tomorrow.

I have tried Page {{page}+20} of {{numpages}+20} but then my TOC is
not
correct.

I would like to have something like Pageref=pageref+20 so my TOC is
correct

Any suggestions?

Thanks

Macropod,

I tried the includetext option. It does work, but it creates too many
conflicts in styles, Toc (it has its own Toc and I don't want it in my
own....), etc.

All your options will work like I want it!

You gave me a bonus of linking the number of pages of the other documents
and not hard coding it.

I have other annexes Not a word docuemnt) that I will have to hardcode the
number of pages, but it is OK.

You answered all my questions, Thanks.

Denis

"macropod" wrote:

Hi Denis,

My preference would be to import the annexure as a linked file - Insert|File
and check the 'link' option. This creates a link via an INCLUDETEXT field.
This way, your TOC will take care of itself.

Another option would be to create your own TOC using cross-references to the
various headings that you want to appear in the TOC. You'd use two such
cross-references for each heading - one to get the text and one to get the
page reference. As you've already noted, the problem is how to deal with
changes if you add/delete pages in the first section. One way would be to
insert a SECTIONPAGES field into the first section, and bookmark it. If you
embed the SECTIONPAGES field in a SET field, the SECTIONPAGES field won't
even be visible. Coding would be something like:
{SET PageCount {SECTIONPAGES}}
In your TOC, the page reference fields will be coded something like:
{PAGEREF _12345}
For the pages to appear after your annexure, you could convert these to
formulae as follows:
(={PAGEREF _12345}+PageCount+20}
That will take care of the changing page count in the first section, with
the '20' representing the number of pages in your annexure. If you want to
accommodate the possibility of the page count in your annexure changing,
you'll once again be dealing with an INCLUDETEXT field, but this time it'll
need to refer to a bookmarked NUMPAGES field in that document, perhaps coded
like:
{SET AnnexPages {NUMPAGES}}
and the page calculation formula coded like:
(={PAGEREF _12345}+PageCount+{INCLUDETEXT "C:/My Documents/Annexure.doc"
AnnexPages}}

Are your eyes watering yet?

Cheers


"Denis Levesque" wrote in message
...
Macropod,

Thanks for your answer.

I did use section breaks. I was wondering if there was another way of
changing the page number. The first page number of the document I want to
insert will vary depending on the sections before. If I enter the "start
page
" at 70 and then I add another page in the previous sections, my page
numbers
will be wrong.

If there is no way to do this, I guess my best bet is to put the formulla
in
my page numbers and change the page numbers in my TOC before the final
print
of my document. This way, I will need to change only one page of my
document
and not the sections I need to change the page numbers.

Thanks.

"macropod" wrote:

Hi Denis,

One way to control your TOC's page numbering would be to use section
breaks,
and format the numbering in each to start page numbering at the number
you
want. You'll have to unlink whichever of the header or footer you've got
your page numbers in for this to work. This approach can be a bit
limiting,
though, if the number of pages in your annexure are liable to change,
since
you'd then have to re-set the following section's starting page number.

An alternative is to simply use an INCLUDETEXT field to import your
annexure
into the main document at the point you want, whether with or without
section breaks. If you do this, your document can take care of the page
numbering automatically - the most you might need to do from time to
time is
to position the cursor somewhere in the imported area and press F9 to
update
the link. The need to do that can be minimised by checking the 'update
automatic links at open' option under Tools|Options|General and the
'update
links' option under Tools|Options|Print.

Cheers


"Denis Levesque" Denis wrote in
message
news Hello,

I am preparing a 100+ pages document and I will need to insert a 20
page
document as annex1, from page 70 to 90. The main document will have
pages
90
to 100.

The easy way to manage TOC and page numbers is to print 20 blank
pages. I
am
looking for a better solution.

I want to create a footer like Page xx of YY. at page 69, I will have
page
69 of 100.

I want my next page to be page 80 of 100. I do not want to change
section
and say start at 80 as the first portion of the document may change.
It
may
be page 83 tomorrow.

I have tried Page {{page}+20} of {{numpages}+20} but then my TOC is
not
correct.

I would like to have something like Pageref=pageref+20 so my TOC is
correct

Any suggestions?

Thanks