If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2000 Publisher problems and printing!!
My dauher is gettinf married on the 18th. I created a
beautiful program ...12 pages 4.75H x6.5H wuth a natural oaoer cover...all this bound together with a a ribbon. My problem is something called TILING. The booklet printed out beautifully until I closed the program. When I opened it this tiling thing appears and now I cannot get the program to print! I need to have 200 of them printed by this weekend...can someone help? How do I convert this back to booklet and not tiled. I've gone so far as to delete the printer driver and reinstall it. It worked perfectly until I colsed the program. I've checked booklet on both printer and publication. i am desperate!!! What caused it to shange and how do I fix it I've tried creating new progets un Wordm Perfect and Works and come up with the same tiling issue. Thank you!! Bonnie |
#2
|
|||
|
|||
Bonnie,
You remind me of a friend who was asked to do her sister's wedding programs. they were working on them up until a day or so before the wedding. Tsk, tsk. That aside, you didn't say which version of {ublisher you were using. I'm basing my responses on Pub 2003. This is from the Help file: If the size of the publication that you are printing is smaller than the paper you will be printing on, you can adjust the frequency with which the publication will print on a page. 1.. Create or open a publication that is smaller than the paper size you want to print on. 2.. On the File menu, click Page Setup. 3.. Click Change Copies Per Sheet. Note This option is available in the Page Setup dialog box only if the publication size is smaller than the selected paper size. If you are printing labels, the option will be Adjust Label Printing. 4.. In the Small Publications Print Options dialog box, click Print multiple copies per sheet. 5.. Under Spacing, type in the values you want for Side Margin, Top Margin, Horizontal Gap, and Vertical Gap. 6.. Click OK twice. 7.. On the File menu, click Print. You should also double check your page set-up as well as your printer set-up for paper size. Can't help you with WordPerfect or Works - I don't use either one of those programs. -- JoAnn Paules MVP Microsoft [Publisher] "Bonnie S" wrote in message ... My dauher is gettinf married on the 18th. I created a beautiful program ...12 pages 4.75H x6.5H wuth a natural oaoer cover...all this bound together with a a ribbon. My problem is something called TILING. The booklet printed out beautifully until I closed the program. When I opened it this tiling thing appears and now I cannot get the program to print! I need to have 200 of them printed by this weekend...can someone help? How do I convert this back to booklet and not tiled. I've gone so far as to delete the printer driver and reinstall it. It worked perfectly until I colsed the program. I've checked booklet on both printer and publication. i am desperate!!! What caused it to shange and how do I fix it I've tried creating new progets un Wordm Perfect and Works and come up with the same tiling issue. Thank you!! Bonnie --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.754 / Virus Database: 504 - Release Date: 9/6/2004 |
#3
|
|||
|
|||
Bonnie,
You remind me of a friend who was asked to do her sister's wedding programs. they were working on them up until a day or so before the wedding. Tsk, tsk. That aside, you didn't say which version of {ublisher you were using. I'm basing my responses on Pub 2003. This is from the Help file: If the size of the publication that you are printing is smaller than the paper you will be printing on, you can adjust the frequency with which the publication will print on a page. 1.. Create or open a publication that is smaller than the paper size you want to print on. 2.. On the File menu, click Page Setup. 3.. Click Change Copies Per Sheet. Note This option is available in the Page Setup dialog box only if the publication size is smaller than the selected paper size. If you are printing labels, the option will be Adjust Label Printing. 4.. In the Small Publications Print Options dialog box, click Print multiple copies per sheet. 5.. Under Spacing, type in the values you want for Side Margin, Top Margin, Horizontal Gap, and Vertical Gap. 6.. Click OK twice. 7.. On the File menu, click Print. You should also double check your page set-up as well as your printer set-up for paper size. Can't help you with WordPerfect or Works - I don't use either one of those programs. -- JoAnn Paules MVP Microsoft [Publisher] "Bonnie S" wrote in message ... My dauher is gettinf married on the 18th. I created a beautiful program ...12 pages 4.75H x6.5H wuth a natural oaoer cover...all this bound together with a a ribbon. My problem is something called TILING. The booklet printed out beautifully until I closed the program. When I opened it this tiling thing appears and now I cannot get the program to print! I need to have 200 of them printed by this weekend...can someone help? How do I convert this back to booklet and not tiled. I've gone so far as to delete the printer driver and reinstall it. It worked perfectly until I colsed the program. I've checked booklet on both printer and publication. i am desperate!!! What caused it to shange and how do I fix it I've tried creating new progets un Wordm Perfect and Works and come up with the same tiling issue. Thank you!! Bonnie --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.754 / Virus Database: 504 - Release Date: 9/6/2004 |
#4
|
|||
|
|||
Thank you, but that option was not available under Page
Setup. The version is 2000...sorry, I should have also mentioned that in the post rather than just the title. These program has been set up for 6 months. We met with the officiate of the ceremony two days ago and the necessary changes were made at that time. All that was changed (as fat as I know) was the words to a song. We switched the unity candle song. I tried to print out one after that and that's when the tile issue came up. It was never there before. In fact, I printed out the copy for the officiate that morning and it worked great. Thanks for your advise...but I'm sorry to say it still doesn't work. I've tried making three new programs and it happens with everything. It is in all programs. Could it be something with my HP 990cxi printer? Bonnie -----Original Message----- Bonnie, You remind me of a friend who was asked to do her sister's wedding programs. they were working on them up until a day or so before the wedding. Tsk, tsk. That aside, you didn't say which version of {ublisher you were using. I'm basing my responses on Pub 2003. This is from the Help file: If the size of the publication that you are printing is smaller than the paper you will be printing on, you can adjust the frequency with which the publication will print on a page. 1.. Create or open a publication that is smaller than the paper size you want to print on. 2.. On the File menu, click Page Setup. 3.. Click Change Copies Per Sheet. Note This option is available in the Page Setup dialog box only if the publication size is smaller than the selected paper size. If you are printing labels, the option will be Adjust Label Printing. 4.. In the Small Publications Print Options dialog box, click Print multiple copies per sheet. 5.. Under Spacing, type in the values you want for Side Margin, Top Margin, Horizontal Gap, and Vertical Gap. 6.. Click OK twice. 7.. On the File menu, click Print. You should also double check your page set-up as well as your printer set-up for paper size. Can't help you with WordPerfect or Works - I don't use either one of those programs. -- |
#5
|
|||
|
|||
Thank you, but that option was not available under Page
Setup. The version is 2000...sorry, I should have also mentioned that in the post rather than just the title. These program has been set up for 6 months. We met with the officiate of the ceremony two days ago and the necessary changes were made at that time. All that was changed (as fat as I know) was the words to a song. We switched the unity candle song. I tried to print out one after that and that's when the tile issue came up. It was never there before. In fact, I printed out the copy for the officiate that morning and it worked great. Thanks for your advise...but I'm sorry to say it still doesn't work. I've tried making three new programs and it happens with everything. It is in all programs. Could it be something with my HP 990cxi printer? Bonnie -----Original Message----- Bonnie, You remind me of a friend who was asked to do her sister's wedding programs. they were working on them up until a day or so before the wedding. Tsk, tsk. That aside, you didn't say which version of {ublisher you were using. I'm basing my responses on Pub 2003. This is from the Help file: If the size of the publication that you are printing is smaller than the paper you will be printing on, you can adjust the frequency with which the publication will print on a page. 1.. Create or open a publication that is smaller than the paper size you want to print on. 2.. On the File menu, click Page Setup. 3.. Click Change Copies Per Sheet. Note This option is available in the Page Setup dialog box only if the publication size is smaller than the selected paper size. If you are printing labels, the option will be Adjust Label Printing. 4.. In the Small Publications Print Options dialog box, click Print multiple copies per sheet. 5.. Under Spacing, type in the values you want for Side Margin, Top Margin, Horizontal Gap, and Vertical Gap. 6.. Click OK twice. 7.. On the File menu, click Print. You should also double check your page set-up as well as your printer set-up for paper size. Can't help you with WordPerfect or Works - I don't use either one of those programs. -- |
#6
|
|||
|
|||
I generally am not this dense...it must be the
stress...lol. I failed to tell you one, possibily important, issue. When I opened the program to make the final changes booklet appeared in the middle of the page. The side and top slide bars were centered exactly on the page when I was able to view the booklet. I've held down the shift key and the right mouse button and attempted to move them into the correct position and it didn't work. I tried holding the control key and right mouse key and that didn't work. I've searched for the past two days on how to's with Publisher 2000, but nothing is working!!! The print area is way inside the page size...1 inch all around. The printer is set up for the same paper size as the booklet. I do appreciate your reply...Thank you. Bonnie -----Original Message----- Thank you, but that option was not available under Page Setup. The version is 2000...sorry, I should have also mentioned that in the post rather than just the title. These program has been set up for 6 months. We met with the officiate of the ceremony two days ago and the necessary changes were made at that time. All that was changed (as fat as I know) was the words to a song. We switched the unity candle song. I tried to print out one after that and that's when the tile issue came up. It was never there before. In fact, I printed out the copy for the officiate that morning and it worked great. Thanks for your advise...but I'm sorry to say it still doesn't work. I've tried making three new programs and it happens with everything. It is in all programs. Could it be something with my HP 990cxi printer? Bonnie -----Original Message----- Bonnie, You remind me of a friend who was asked to do her sister's wedding programs. they were working on them up until a day or so before the wedding. Tsk, tsk. That aside, you didn't say which version of {ublisher you were using. I'm basing my responses on Pub 2003. This is from the Help file: If the size of the publication that you are printing is smaller than the paper you will be printing on, you can adjust the frequency with which the publication will print on a page. 1.. Create or open a publication that is smaller than the paper size you want to print on. 2.. On the File menu, click Page Setup. 3.. Click Change Copies Per Sheet. Note This option is available in the Page Setup dialog box only if the publication size is smaller than the selected paper size. If you are printing labels, the option will be Adjust Label Printing. 4.. In the Small Publications Print Options dialog box, click Print multiple copies per sheet. 5.. Under Spacing, type in the values you want for Side Margin, Top Margin, Horizontal Gap, and Vertical Gap. 6.. Click OK twice. 7.. On the File menu, click Print. You should also double check your page set-up as well as your printer set-up for paper size. Can't help you with WordPerfect or Works - I don't use either one of those programs. -- . |
#7
|
|||
|
|||
I generally am not this dense...it must be the
stress...lol. I failed to tell you one, possibily important, issue. When I opened the program to make the final changes booklet appeared in the middle of the page. The side and top slide bars were centered exactly on the page when I was able to view the booklet. I've held down the shift key and the right mouse button and attempted to move them into the correct position and it didn't work. I tried holding the control key and right mouse key and that didn't work. I've searched for the past two days on how to's with Publisher 2000, but nothing is working!!! The print area is way inside the page size...1 inch all around. The printer is set up for the same paper size as the booklet. I do appreciate your reply...Thank you. Bonnie -----Original Message----- Thank you, but that option was not available under Page Setup. The version is 2000...sorry, I should have also mentioned that in the post rather than just the title. These program has been set up for 6 months. We met with the officiate of the ceremony two days ago and the necessary changes were made at that time. All that was changed (as fat as I know) was the words to a song. We switched the unity candle song. I tried to print out one after that and that's when the tile issue came up. It was never there before. In fact, I printed out the copy for the officiate that morning and it worked great. Thanks for your advise...but I'm sorry to say it still doesn't work. I've tried making three new programs and it happens with everything. It is in all programs. Could it be something with my HP 990cxi printer? Bonnie -----Original Message----- Bonnie, You remind me of a friend who was asked to do her sister's wedding programs. they were working on them up until a day or so before the wedding. Tsk, tsk. That aside, you didn't say which version of {ublisher you were using. I'm basing my responses on Pub 2003. This is from the Help file: If the size of the publication that you are printing is smaller than the paper you will be printing on, you can adjust the frequency with which the publication will print on a page. 1.. Create or open a publication that is smaller than the paper size you want to print on. 2.. On the File menu, click Page Setup. 3.. Click Change Copies Per Sheet. Note This option is available in the Page Setup dialog box only if the publication size is smaller than the selected paper size. If you are printing labels, the option will be Adjust Label Printing. 4.. In the Small Publications Print Options dialog box, click Print multiple copies per sheet. 5.. Under Spacing, type in the values you want for Side Margin, Top Margin, Horizontal Gap, and Vertical Gap. 6.. Click OK twice. 7.. On the File menu, click Print. You should also double check your page set-up as well as your printer set-up for paper size. Can't help you with WordPerfect or Works - I don't use either one of those programs. -- . |
#8
|
|||
|
|||
When you go to print, there is a dialogue on the print page (page options), check to
see if that has changed. You can turn off tiling. Be sure you have "special fold" selected. Is the printer the same as the one you originally setup for the program six months ago? Publisher retains all printer information within its documents. Clear the HP as your default printer before you open Publisher. Does the publication appear okay? Go to HP's web site and look around for an updated driver or reinstall the driver you have. http://www.hp.com/country/us/en/support.html How to clean up printer drivers http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm -- Mary Sauer MS MVP http://office.microsoft.com/ http://www.msauer.mvps.org/ news://msnews.microsoft.com "Bonnie" wrote in message ... Thank you, but that option was not available under Page Setup. The version is 2000...sorry, I should have also mentioned that in the post rather than just the title. These program has been set up for 6 months. We met with the officiate of the ceremony two days ago and the necessary changes were made at that time. All that was changed (as fat as I know) was the words to a song. We switched the unity candle song. I tried to print out one after that and that's when the tile issue came up. It was never there before. In fact, I printed out the copy for the officiate that morning and it worked great. Thanks for your advise...but I'm sorry to say it still doesn't work. I've tried making three new programs and it happens with everything. It is in all programs. Could it be something with my HP 990cxi printer? Bonnie -----Original Message----- Bonnie, You remind me of a friend who was asked to do her sister's wedding programs. they were working on them up until a day or so before the wedding. Tsk, tsk. That aside, you didn't say which version of {ublisher you were using. I'm basing my responses on Pub 2003. This is from the Help file: If the size of the publication that you are printing is smaller than the paper you will be printing on, you can adjust the frequency with which the publication will print on a page. 1.. Create or open a publication that is smaller than the paper size you want to print on. 2.. On the File menu, click Page Setup. 3.. Click Change Copies Per Sheet. Note This option is available in the Page Setup dialog box only if the publication size is smaller than the selected paper size. If you are printing labels, the option will be Adjust Label Printing. 4.. In the Small Publications Print Options dialog box, click Print multiple copies per sheet. 5.. Under Spacing, type in the values you want for Side Margin, Top Margin, Horizontal Gap, and Vertical Gap. 6.. Click OK twice. 7.. On the File menu, click Print. You should also double check your page set-up as well as your printer set-up for paper size. Can't help you with WordPerfect or Works - I don't use either one of those programs. -- |
#9
|
|||
|
|||
When you go to print, there is a dialogue on the print page (page options), check to
see if that has changed. You can turn off tiling. Be sure you have "special fold" selected. Is the printer the same as the one you originally setup for the program six months ago? Publisher retains all printer information within its documents. Clear the HP as your default printer before you open Publisher. Does the publication appear okay? Go to HP's web site and look around for an updated driver or reinstall the driver you have. http://www.hp.com/country/us/en/support.html How to clean up printer drivers http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm -- Mary Sauer MS MVP http://office.microsoft.com/ http://www.msauer.mvps.org/ news://msnews.microsoft.com "Bonnie" wrote in message ... Thank you, but that option was not available under Page Setup. The version is 2000...sorry, I should have also mentioned that in the post rather than just the title. These program has been set up for 6 months. We met with the officiate of the ceremony two days ago and the necessary changes were made at that time. All that was changed (as fat as I know) was the words to a song. We switched the unity candle song. I tried to print out one after that and that's when the tile issue came up. It was never there before. In fact, I printed out the copy for the officiate that morning and it worked great. Thanks for your advise...but I'm sorry to say it still doesn't work. I've tried making three new programs and it happens with everything. It is in all programs. Could it be something with my HP 990cxi printer? Bonnie -----Original Message----- Bonnie, You remind me of a friend who was asked to do her sister's wedding programs. they were working on them up until a day or so before the wedding. Tsk, tsk. That aside, you didn't say which version of {ublisher you were using. I'm basing my responses on Pub 2003. This is from the Help file: If the size of the publication that you are printing is smaller than the paper you will be printing on, you can adjust the frequency with which the publication will print on a page. 1.. Create or open a publication that is smaller than the paper size you want to print on. 2.. On the File menu, click Page Setup. 3.. Click Change Copies Per Sheet. Note This option is available in the Page Setup dialog box only if the publication size is smaller than the selected paper size. If you are printing labels, the option will be Adjust Label Printing. 4.. In the Small Publications Print Options dialog box, click Print multiple copies per sheet. 5.. Under Spacing, type in the values you want for Side Margin, Top Margin, Horizontal Gap, and Vertical Gap. 6.. Click OK twice. 7.. On the File menu, click Print. You should also double check your page set-up as well as your printer set-up for paper size. Can't help you with WordPerfect or Works - I don't use either one of those programs. -- |
#10
|
|||
|
|||
I feel like such a pain to you...it is the same printer.
Yesterday I deleted the printer driver and updated it from the HP website. I do have special fold selected, but it's still doing it. Coule the change in the ruler marks and location of the document have anything to do with it? It was always set at zero, but now only shows up at the 5" mark. I cannot get it to move back to zero. I've tried the shift and right mouse key, etc. How do I turn off tiling? I've looked everywhere. Other than the placement on the screen, the document looks perfect. Thanks again, Bonnie -----Original Message----- When you go to print, there is a dialogue on the print page (page options), check to see if that has changed. You can turn off tiling. Be sure you have "special fold" selected. Is the printer the same as the one you originally setup for the program six months ago? Publisher retains all printer information within its documents. Clear the HP as your default printer before you open Publisher. Does the publication appear okay? Go to HP's web site and look around for an updated driver or reinstall the driver you have. http://www.hp.com/country/us/en/support.html How to clean up printer drivers http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm -- Mary Sauer MS MVP http://office.microsoft.com/ http://www.msauer.mvps.org/ news://msnews.microsoft.com "Bonnie" wrote in message ... Thank you, but that option was not available under Page Setup. The version is 2000...sorry, I should have also mentioned that in the post rather than just the title. These program has been set up for 6 months. We met with the officiate of the ceremony two days ago and the necessary changes were made at that time. All that was changed (as fat as I know) was the words to a song. We switched the unity candle song. I tried to print out one after that and that's when the tile issue came up. It was never there before. In fact, I printed out the copy for the officiate that morning and it worked great. Thanks for your advise...but I'm sorry to say it still doesn't work. I've tried making three new programs and it happens with everything. It is in all programs. Could it be something with my HP 990cxi printer? Bonnie -----Original Message----- Bonnie, You remind me of a friend who was asked to do her sister's wedding programs. they were working on them up until a day or so before the wedding. Tsk, tsk. That aside, you didn't say which version of {ublisher you were using. I'm basing my responses on Pub 2003. This is from the Help file: If the size of the publication that you are printing is smaller than the paper you will be printing on, you can adjust the frequency with which the publication will print on a page. 1.. Create or open a publication that is smaller than the paper size you want to print on. 2.. On the File menu, click Page Setup. 3.. Click Change Copies Per Sheet. Note This option is available in the Page Setup dialog box only if the publication size is smaller than the selected paper size. If you are printing labels, the option will be Adjust Label Printing. 4.. In the Small Publications Print Options dialog box, click Print multiple copies per sheet. 5.. Under Spacing, type in the values you want for Side Margin, Top Margin, Horizontal Gap, and Vertical Gap. 6.. Click OK twice. 7.. On the File menu, click Print. You should also double check your page set-up as well as your printer set-up for paper size. Can't help you with WordPerfect or Works - I don't use either one of those programs. -- . |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2 GB too large? | Matthias Vering | Publisher | 18 | July 21st, 2004 03:14 AM |
Problems Printing Mailing Labels... | Grim Reaper | Setting Up & Running Reports | 0 | May 19th, 2004 12:31 AM |
Word 2000 DDE Speed | Stefan German | General Discussion | 0 | May 17th, 2004 04:14 PM |
Publisher 2000 won't print on all printers | Robin Stevens | Publisher | 4 | May 6th, 2004 06:45 PM |
Publisher 2000 | Redroof | Publisher | 1 | April 29th, 2004 12:22 PM |