2000 Publisher problems and printing!!

I feel like such a pain to you...it is the same printer.
Yesterday I deleted the printer driver and updated it from
the HP website. I do have special fold selected, but it's
still doing it. Coule the change in the ruler marks and
location of the document have anything to do with it? It
was always set at zero, but now only shows up at the 5"
mark. I cannot get it to move back to zero. I've tried
the shift and right mouse key, etc. How do I turn off
tiling? I've looked everywhere. Other than the placement
on the screen, the document looks perfect.

Thanks again,
Bonnie
-----Original Message-----
When you go to print, there is a dialogue on the print
page (page options), check to
see if that has changed.
You can turn off tiling. Be sure you have "special fold"
selected.
Is the printer the same as the one you originally setup
for the program six months
ago? Publisher retains all printer information within its
documents. Clear the HP as
your default printer before you open Publisher. Does the
publication appear okay?
Go to HP's web site and look around for an updated
driver or reinstall the driver
you have.
http://www.hp.com/country/us/en/support.html
How to clean up printer drivers
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
--
Mary Sauer MS MVP
http://office.microsoft.com/
http://www.msauer.mvps.org/
news://msnews.microsoft.com
"Bonnie" wrote in
message
...
Thank you, but that option was not available under Page
Setup. The version is 2000...sorry, I should have also
mentioned that in the post rather than just the title.
These program has been set up for 6 months. We met with
the officiate of the ceremony two days ago and the
necessary changes were made at that time. All that was
changed (as fat as I know) was the words to a song. We
switched the unity candle song. I tried to print out
one
after that and that's when the tile issue came up. It
was
never there before. In fact, I printed out the copy for
the officiate that morning and it worked great.
Thanks for your advise...but I'm sorry to say it still
doesn't work. I've tried making three new programs and
it
happens with everything. It is in all programs. Could
it
be something with my HP 990cxi printer?

Bonnie




-----Original Message-----
Bonnie,

You remind me of a friend who was asked to do her
sister's wedding programs.
they were working on them up until a day or so before
the wedding. Tsk,
tsk.

That aside, you didn't say which version of {ublisher
you
were using. I'm
basing my responses on Pub 2003. This is from the Help
file:

If the size of the publication that you are printing is
smaller than the
paper you will be printing on, you can adjust the
frequency with which the
publication will print on a page.

1.. Create or open a publication that is smaller than
the paper size you
want to print on.
2.. On the File menu, click Page Setup.
3.. Click Change Copies Per Sheet.
Note This option is available in the Page Setup
dialog
box only if the
publication size is smaller than the selected paper
size.
If you are
printing labels, the option will be Adjust Label
Printing.

4.. In the Small Publications Print Options dialog
box,
click Print
multiple copies per sheet.
5.. Under Spacing, type in the values you want for
Side
Margin, Top
Margin, Horizontal Gap, and Vertical Gap.
6.. Click OK twice.
7.. On the File menu, click Print.

You should also double check your page set-up as well as
your printer set-up
for paper size. Can't help you with WordPerfect or
Works -
I don't use
either one of those programs.



--



.

Can you send me the document?
I will download the driver for your printer and see what I can do. Do you have many
images in this document? There are times when graphics can corrupt a publication.
Remove "my" to reply.

--
Mary Sauer MS MVP
http://office.microsoft.com/
http://www.msauer.mvps.org/
news://msnews.microsoft.com
"Bonnie" wrote in message
...
I feel like such a pain to you...it is the same printer.
Yesterday I deleted the printer driver and updated it from
the HP website. I do have special fold selected, but it's
still doing it. Coule the change in the ruler marks and
location of the document have anything to do with it? It
was always set at zero, but now only shows up at the 5"
mark. I cannot get it to move back to zero. I've tried
the shift and right mouse key, etc. How do I turn off
tiling? I've looked everywhere. Other than the placement
on the screen, the document looks perfect.

Thanks again,
Bonnie
-----Original Message-----
When you go to print, there is a dialogue on the print
page (page options), check to
see if that has changed.
You can turn off tiling. Be sure you have "special fold"
selected.
Is the printer the same as the one you originally setup
for the program six months
ago? Publisher retains all printer information within its
documents. Clear the HP as
your default printer before you open Publisher. Does the
publication appear okay?
Go to HP's web site and look around for an updated
driver or reinstall the driver
you have.
http://www.hp.com/country/us/en/support.html
How to clean up printer drivers
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
--
Mary Sauer MS MVP
http://office.microsoft.com/
http://www.msauer.mvps.org/
news://msnews.microsoft.com
"Bonnie" wrote in
message
...
Thank you, but that option was not available under Page
Setup. The version is 2000...sorry, I should have also
mentioned that in the post rather than just the title.
These program has been set up for 6 months. We met with
the officiate of the ceremony two days ago and the
necessary changes were made at that time. All that was
changed (as fat as I know) was the words to a song. We
switched the unity candle song. I tried to print out
one
after that and that's when the tile issue came up. It
was
never there before. In fact, I printed out the copy for
the officiate that morning and it worked great.
Thanks for your advise...but I'm sorry to say it still
doesn't work. I've tried making three new programs and
it
happens with everything. It is in all programs. Could
it
be something with my HP 990cxi printer?

Bonnie




-----Original Message-----
Bonnie,

You remind me of a friend who was asked to do her
sister's wedding programs.
they were working on them up until a day or so before
the wedding. Tsk,
tsk.

That aside, you didn't say which version of {ublisher
you
were using. I'm
basing my responses on Pub 2003. This is from the Help
file:

If the size of the publication that you are printing is
smaller than the
paper you will be printing on, you can adjust the
frequency with which the
publication will print on a page.

1.. Create or open a publication that is smaller than
the paper size you
want to print on.
2.. On the File menu, click Page Setup.
3.. Click Change Copies Per Sheet.
Note This option is available in the Page Setup
dialog
box only if the
publication size is smaller than the selected paper
size.
If you are
printing labels, the option will be Adjust Label
Printing.

4.. In the Small Publications Print Options dialog
box,
click Print
multiple copies per sheet.
5.. Under Spacing, type in the values you want for
Side
Margin, Top
Margin, Horizontal Gap, and Vertical Gap.
6.. Click OK twice.
7.. On the File menu, click Print.

You should also double check your page set-up as well as
your printer set-up
for paper size. Can't help you with WordPerfect or
Works -
I don't use
either one of those programs.



--



.

Can you send me the document?
I will download the driver for your printer and see what I can do. Do you have many
images in this document? There are times when graphics can corrupt a publication.
Remove "my" to reply.

--
Mary Sauer MS MVP
http://office.microsoft.com/
http://www.msauer.mvps.org/
news://msnews.microsoft.com
"Bonnie" wrote in message
...
I feel like such a pain to you...it is the same printer.
Yesterday I deleted the printer driver and updated it from
the HP website. I do have special fold selected, but it's
still doing it. Coule the change in the ruler marks and
location of the document have anything to do with it? It
was always set at zero, but now only shows up at the 5"
mark. I cannot get it to move back to zero. I've tried
the shift and right mouse key, etc. How do I turn off
tiling? I've looked everywhere. Other than the placement
on the screen, the document looks perfect.

Thanks again,
Bonnie
-----Original Message-----
When you go to print, there is a dialogue on the print
page (page options), check to
see if that has changed.
You can turn off tiling. Be sure you have "special fold"
selected.
Is the printer the same as the one you originally setup
for the program six months
ago? Publisher retains all printer information within its
documents. Clear the HP as
your default printer before you open Publisher. Does the
publication appear okay?
Go to HP's web site and look around for an updated
driver or reinstall the driver
you have.
http://www.hp.com/country/us/en/support.html
How to clean up printer drivers
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
--
Mary Sauer MS MVP
http://office.microsoft.com/
http://www.msauer.mvps.org/
news://msnews.microsoft.com
"Bonnie" wrote in
message
...
Thank you, but that option was not available under Page
Setup. The version is 2000...sorry, I should have also
mentioned that in the post rather than just the title.
These program has been set up for 6 months. We met with
the officiate of the ceremony two days ago and the
necessary changes were made at that time. All that was
changed (as fat as I know) was the words to a song. We
switched the unity candle song. I tried to print out
one
after that and that's when the tile issue came up. It
was
never there before. In fact, I printed out the copy for
the officiate that morning and it worked great.
Thanks for your advise...but I'm sorry to say it still
doesn't work. I've tried making three new programs and
it
happens with everything. It is in all programs. Could
it
be something with my HP 990cxi printer?

Bonnie




-----Original Message-----
Bonnie,

You remind me of a friend who was asked to do her
sister's wedding programs.
they were working on them up until a day or so before
the wedding. Tsk,
tsk.

That aside, you didn't say which version of {ublisher
you
were using. I'm
basing my responses on Pub 2003. This is from the Help
file:

If the size of the publication that you are printing is
smaller than the
paper you will be printing on, you can adjust the
frequency with which the
publication will print on a page.

1.. Create or open a publication that is smaller than
the paper size you
want to print on.
2.. On the File menu, click Page Setup.
3.. Click Change Copies Per Sheet.
Note This option is available in the Page Setup
dialog
box only if the
publication size is smaller than the selected paper
size.
If you are
printing labels, the option will be Adjust Label
Printing.

4.. In the Small Publications Print Options dialog
box,
click Print
multiple copies per sheet.
5.. Under Spacing, type in the values you want for
Side
Margin, Top
Margin, Horizontal Gap, and Vertical Gap.
6.. Click OK twice.
7.. On the File menu, click Print.

You should also double check your page set-up as well as
your printer set-up
for paper size. Can't help you with WordPerfect or
Works -
I don't use
either one of those programs.



--



.