If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Style box added on 2007 QAT shows nothing
We were confounded by MS's decision to remove the Style box from the
default interface in 2007, but were able to add it to the QAT using the Customize dialog. Just recently it seems to have lost its innards. When you click its drop-down arrow you get a long dropdown list as before, but it's *empty* except for one entry showing the style at the cursor. Nghghh?? Any ideas why this happens? Happens in every doc. Typing a style's name or alias in the box applies it, as it should. But that only works if you've memorized them! Tried removing & re-adding the Style box to the QAT, no change. Help?? MT |
#2
|
|||
|
|||
Style box added on 2007 QAT shows nothing
FWIW, I have seen this as well. As far as I know, there is no fix or
workaround available. :-( -- Stefan Blom Microsoft Word MVP "Mark Tangard" wrote in message ... We were confounded by MS's decision to remove the Style box from the default interface in 2007, but were able to add it to the QAT using the Customize dialog. Just recently it seems to have lost its innards. When you click its drop-down arrow you get a long dropdown list as before, but it's *empty* except for one entry showing the style at the cursor. Nghghh?? Any ideas why this happens? Happens in every doc. Typing a style's name or alias in the box applies it, as it should. But that only works if you've memorized them! Tried removing & re-adding the Style box to the QAT, no change. Help?? MT |
#3
|
|||
|
|||
Style box added on 2007 QAT shows nothing
Well, that's pretty upsetting.
I can't imagine all the style-using folks I used to know here in pre-2007 days have just shrugged this off. Is there a new recommended way to manage text formatting in 2007 that I don't know about? Is our only option to downgrade this machine back to 2003? It's not very usable this way. Just realized I didn't try a Detect/Repair; will do that & post back. Mark Stefan Blom wrote: FWIW, I have seen this as well. As far as I know, there is no fix or workaround available. :-( -- Stefan Blom Microsoft Word MVP "Mark Tangard" wrote in message ... We were confounded by MS's decision to remove the Style box from the default interface in 2007, but were able to add it to the QAT using the Customize dialog. Just recently it seems to have lost its innards. When you click its drop-down arrow you get a long dropdown list as before, but it's *empty* except for one entry showing the style at the cursor. Nghghh?? Any ideas why this happens? Happens in every doc. Typing a style's name or alias in the box applies it, as it should. But that only works if you've memorized them! Tried removing & re-adding the Style box to the QAT, no change. Help?? MT |
#4
|
|||
|
|||
Style box added on 2007 QAT shows nothing
Fortunately I have not seen that particular problem, but does
CTRL+ALT+SHIFT+S work? If so you can add that dialog to the QAT it is called Styles ... From that dialog you can set the display options. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Mark Tangard wrote: Well, that's pretty upsetting. I can't imagine all the style-using folks I used to know here in pre-2007 days have just shrugged this off. Is there a new recommended way to manage text formatting in 2007 that I don't know about? Is our only option to downgrade this machine back to 2003? It's not very usable this way. Just realized I didn't try a Detect/Repair; will do that & post back. Mark Stefan Blom wrote: FWIW, I have seen this as well. As far as I know, there is no fix or workaround available. :-( -- Stefan Blom Microsoft Word MVP "Mark Tangard" wrote in message ... We were confounded by MS's decision to remove the Style box from the default interface in 2007, but were able to add it to the QAT using the Customize dialog. Just recently it seems to have lost its innards. When you click its drop-down arrow you get a long dropdown list as before, but it's *empty* except for one entry showing the style at the cursor. Nghghh?? Any ideas why this happens? Happens in every doc. Typing a style's name or alias in the box applies it, as it should. But that only works if you've memorized them! Tried removing & re-adding the Style box to the QAT, no change. Help?? MT |
#5
|
|||
|
|||
Style box added on 2007 QAT shows nothing
There is a discussion in the private newsgroup about this issue, but it has
been a while, so I don't know if it is still accessible. I posted the initial question in that thread, as soon as I noticed the issue (since then I have seen it on another Word installation as well). Someone else confirmed the behavior, but I don't remember who it was. Beth Melton? Cindy Meister? As far as I can remember, no one was able to describe the circumstances that caused the problem, and a few suggested workarounds such as creating a new user profile didn't help. -- Stefan Blom Microsoft Word MVP "Graham Mayor" wrote in message ... Fortunately I have not seen that particular problem, but does CTRL+ALT+SHIFT+S work? If so you can add that dialog to the QAT it is called Styles ... From that dialog you can set the display options. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Mark Tangard wrote: Well, that's pretty upsetting. I can't imagine all the style-using folks I used to know here in pre-2007 days have just shrugged this off. Is there a new recommended way to manage text formatting in 2007 that I don't know about? Is our only option to downgrade this machine back to 2003? It's not very usable this way. Just realized I didn't try a Detect/Repair; will do that & post back. Mark Stefan Blom wrote: FWIW, I have seen this as well. As far as I know, there is no fix or workaround available. :-( -- Stefan Blom Microsoft Word MVP "Mark Tangard" wrote in message ... We were confounded by MS's decision to remove the Style box from the default interface in 2007, but were able to add it to the QAT using the Customize dialog. Just recently it seems to have lost its innards. When you click its drop-down arrow you get a long dropdown list as before, but it's *empty* except for one entry showing the style at the cursor. Nghghh?? Any ideas why this happens? Happens in every doc. Typing a style's name or alias in the box applies it, as it should. But that only works if you've memorized them! Tried removing & re-adding the Style box to the QAT, no change. Help?? MT |
#6
|
|||
|
|||
Style box added on 2007 QAT shows nothing
I saw this problem once... and deleting Normal.dotm (and letting Word create
a new one) fixed it. -- Herb Tyson MS MVP Author of the Word 2007 Bible Blog: http://word2007bible.herbtyson.com Web: http://www.herbtyson.com "Stefan Blom" wrote in message ... There is a discussion in the private newsgroup about this issue, but it has been a while, so I don't know if it is still accessible. I posted the initial question in that thread, as soon as I noticed the issue (since then I have seen it on another Word installation as well). Someone else confirmed the behavior, but I don't remember who it was. Beth Melton? Cindy Meister? As far as I can remember, no one was able to describe the circumstances that caused the problem, and a few suggested workarounds such as creating a new user profile didn't help. -- Stefan Blom Microsoft Word MVP "Graham Mayor" wrote in message ... Fortunately I have not seen that particular problem, but does CTRL+ALT+SHIFT+S work? If so you can add that dialog to the QAT it is called Styles ... From that dialog you can set the display options. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Mark Tangard wrote: Well, that's pretty upsetting. I can't imagine all the style-using folks I used to know here in pre-2007 days have just shrugged this off. Is there a new recommended way to manage text formatting in 2007 that I don't know about? Is our only option to downgrade this machine back to 2003? It's not very usable this way. Just realized I didn't try a Detect/Repair; will do that & post back. Mark Stefan Blom wrote: FWIW, I have seen this as well. As far as I know, there is no fix or workaround available. :-( -- Stefan Blom Microsoft Word MVP "Mark Tangard" wrote in message ... We were confounded by MS's decision to remove the Style box from the default interface in 2007, but were able to add it to the QAT using the Customize dialog. Just recently it seems to have lost its innards. When you click its drop-down arrow you get a long dropdown list as before, but it's *empty* except for one entry showing the style at the cursor. Nghghh?? Any ideas why this happens? Happens in every doc. Typing a style's name or alias in the box applies it, as it should. But that only works if you've memorized them! Tried removing & re-adding the Style box to the QAT, no change. Help?? MT |
#7
|
|||
|
|||
Style box added on 2007 QAT shows nothing
Hi people. Graham's suggestion worked. Actually you don't even need the ALT,
which of course now reminds me that the pre-2007 shortcut to get to the Style box was always CTRL+SHIFT+S, so obviously I should've tried that first, duh. I'll try Herb's also (should've thought of that too) if it happens again -- awkward though, since there's code in some of my users' Normal templates. The floating Apply Style window that comes up with CTRL+SHIFT+S actually seems slightly more legible than the one you get when you add 'Style' to the QAT (illusion?), so we may stick with that. (On a tangent there, as a group my team is pretty ticked off at how it seems impossible to adjust the font size of ribbon items throughout Office 2007, to make them more legible to folks who aren't 20. Anybody else climbing the walls over that? I & many of my crew already wear eyeglasses...) Thanks all, MT Herb Tyson [MVP] wrote: I saw this problem once... and deleting Normal.dotm (and letting Word create a new one) fixed it. -- Herb Tyson MS MVP Author of the Word 2007 Bible Blog: http://word2007bible.herbtyson.com Web: http://www.herbtyson.com "Stefan Blom" wrote in message ... There is a discussion in the private newsgroup about this issue, but it has been a while, so I don't know if it is still accessible. I posted the initial question in that thread, as soon as I noticed the issue (since then I have seen it on another Word installation as well). Someone else confirmed the behavior, but I don't remember who it was. Beth Melton? Cindy Meister? As far as I can remember, no one was able to describe the circumstances that caused the problem, and a few suggested workarounds such as creating a new user profile didn't help. -- Stefan Blom Microsoft Word MVP "Graham Mayor" wrote in message ... Fortunately I have not seen that particular problem, but does CTRL+ALT+SHIFT+S work? If so you can add that dialog to the QAT it is called Styles ... From that dialog you can set the display options. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Mark Tangard wrote: Well, that's pretty upsetting. I can't imagine all the style-using folks I used to know here in pre-2007 days have just shrugged this off. Is there a new recommended way to manage text formatting in 2007 that I don't know about? Is our only option to downgrade this machine back to 2003? It's not very usable this way. Just realized I didn't try a Detect/Repair; will do that & post back. Mark Stefan Blom wrote: FWIW, I have seen this as well. As far as I know, there is no fix or workaround available. :-( -- Stefan Blom Microsoft Word MVP "Mark Tangard" wrote in message ... We were confounded by MS's decision to remove the Style box from the default interface in 2007, but were able to add it to the QAT using the Customize dialog. Just recently it seems to have lost its innards. When you click its drop-down arrow you get a long dropdown list as before, but it's *empty* except for one entry showing the style at the cursor. Nghghh?? Any ideas why this happens? Happens in every doc. Typing a style's name or alias in the box applies it, as it should. But that only works if you've memorized them! Tried removing & re-adding the Style box to the QAT, no change. Help?? MT |
#8
|
|||
|
|||
Style box added on 2007 QAT shows nothing
Deleting normal.dotm did not work for me.
-- Stefan Blom Microsoft Word MVP "Herb Tyson [MVP]" wrote in message ... I saw this problem once... and deleting Normal.dotm (and letting Word create a new one) fixed it. -- Herb Tyson MS MVP Author of the Word 2007 Bible Blog: http://word2007bible.herbtyson.com Web: http://www.herbtyson.com "Stefan Blom" wrote in message ... There is a discussion in the private newsgroup about this issue, but it has been a while, so I don't know if it is still accessible. I posted the initial question in that thread, as soon as I noticed the issue (since then I have seen it on another Word installation as well). Someone else confirmed the behavior, but I don't remember who it was. Beth Melton? Cindy Meister? As far as I can remember, no one was able to describe the circumstances that caused the problem, and a few suggested workarounds such as creating a new user profile didn't help. -- Stefan Blom Microsoft Word MVP "Graham Mayor" wrote in message ... Fortunately I have not seen that particular problem, but does CTRL+ALT+SHIFT+S work? If so you can add that dialog to the QAT it is called Styles ... From that dialog you can set the display options. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Mark Tangard wrote: Well, that's pretty upsetting. I can't imagine all the style-using folks I used to know here in pre-2007 days have just shrugged this off. Is there a new recommended way to manage text formatting in 2007 that I don't know about? Is our only option to downgrade this machine back to 2003? It's not very usable this way. Just realized I didn't try a Detect/Repair; will do that & post back. Mark Stefan Blom wrote: FWIW, I have seen this as well. As far as I know, there is no fix or workaround available. :-( -- Stefan Blom Microsoft Word MVP "Mark Tangard" wrote in message ... We were confounded by MS's decision to remove the Style box from the default interface in 2007, but were able to add it to the QAT using the Customize dialog. Just recently it seems to have lost its innards. When you click its drop-down arrow you get a long dropdown list as before, but it's *empty* except for one entry showing the style at the cursor. Nghghh?? Any ideas why this happens? Happens in every doc. Typing a style's name or alias in the box applies it, as it should. But that only works if you've memorized them! Tried removing & re-adding the Style box to the QAT, no change. Help?? MT |
#9
|
|||
|
|||
Style box added on 2007 QAT shows nothing
So... you have this problem at present? I assume you've been through "the
usual suspects" such as deleting the Data key or even renaming the Word branch that contains the Data key. What about deleting/renaming word.qat? Mine is he C:\Users\Herb\AppData\Local\Microsoft\Office -- Herb Tyson MS MVP Author of the Word 2007 Bible Blog: http://word2007bible.herbtyson.com Web: http://www.herbtyson.com "Stefan Blom" wrote in message ... Deleting normal.dotm did not work for me. -- Stefan Blom Microsoft Word MVP "Herb Tyson [MVP]" wrote in message ... I saw this problem once... and deleting Normal.dotm (and letting Word create a new one) fixed it. -- Herb Tyson MS MVP Author of the Word 2007 Bible Blog: http://word2007bible.herbtyson.com Web: http://www.herbtyson.com "Stefan Blom" wrote in message ... There is a discussion in the private newsgroup about this issue, but it has been a while, so I don't know if it is still accessible. I posted the initial question in that thread, as soon as I noticed the issue (since then I have seen it on another Word installation as well). Someone else confirmed the behavior, but I don't remember who it was. Beth Melton? Cindy Meister? As far as I can remember, no one was able to describe the circumstances that caused the problem, and a few suggested workarounds such as creating a new user profile didn't help. -- Stefan Blom Microsoft Word MVP "Graham Mayor" wrote in message ... Fortunately I have not seen that particular problem, but does CTRL+ALT+SHIFT+S work? If so you can add that dialog to the QAT it is called Styles ... From that dialog you can set the display options. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Mark Tangard wrote: Well, that's pretty upsetting. I can't imagine all the style-using folks I used to know here in pre-2007 days have just shrugged this off. Is there a new recommended way to manage text formatting in 2007 that I don't know about? Is our only option to downgrade this machine back to 2003? It's not very usable this way. Just realized I didn't try a Detect/Repair; will do that & post back. Mark Stefan Blom wrote: FWIW, I have seen this as well. As far as I know, there is no fix or workaround available. :-( -- Stefan Blom Microsoft Word MVP "Mark Tangard" wrote in message ... We were confounded by MS's decision to remove the Style box from the default interface in 2007, but were able to add it to the QAT using the Customize dialog. Just recently it seems to have lost its innards. When you click its drop-down arrow you get a long dropdown list as before, but it's *empty* except for one entry showing the style at the cursor. Nghghh?? Any ideas why this happens? Happens in every doc. Typing a style's name or alias in the box applies it, as it should. But that only works if you've memorized them! Tried removing & re-adding the Style box to the QAT, no change. Help?? MT |
#10
|
|||
|
|||
Style box added on 2007 QAT shows nothing
I've had it on my home computer since I first reported it in the private
newsgroup. And, no, the usual suspects were found not guilty. :-( -- Stefan Blom Microsoft Word MVP "Herb Tyson [MVP]" wrote in message ... So... you have this problem at present? I assume you've been through "the usual suspects" such as deleting the Data key or even renaming the Word branch that contains the Data key. What about deleting/renaming word.qat? Mine is he C:\Users\Herb\AppData\Local\Microsoft\Office -- Herb Tyson MS MVP Author of the Word 2007 Bible Blog: http://word2007bible.herbtyson.com Web: http://www.herbtyson.com "Stefan Blom" wrote in message ... Deleting normal.dotm did not work for me. -- Stefan Blom Microsoft Word MVP "Herb Tyson [MVP]" wrote in message ... I saw this problem once... and deleting Normal.dotm (and letting Word create a new one) fixed it. -- Herb Tyson MS MVP Author of the Word 2007 Bible Blog: http://word2007bible.herbtyson.com Web: http://www.herbtyson.com "Stefan Blom" wrote in message ... There is a discussion in the private newsgroup about this issue, but it has been a while, so I don't know if it is still accessible. I posted the initial question in that thread, as soon as I noticed the issue (since then I have seen it on another Word installation as well). Someone else confirmed the behavior, but I don't remember who it was. Beth Melton? Cindy Meister? As far as I can remember, no one was able to describe the circumstances that caused the problem, and a few suggested workarounds such as creating a new user profile didn't help. -- Stefan Blom Microsoft Word MVP "Graham Mayor" wrote in message ... Fortunately I have not seen that particular problem, but does CTRL+ALT+SHIFT+S work? If so you can add that dialog to the QAT it is called Styles ... From that dialog you can set the display options. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Mark Tangard wrote: Well, that's pretty upsetting. I can't imagine all the style-using folks I used to know here in pre-2007 days have just shrugged this off. Is there a new recommended way to manage text formatting in 2007 that I don't know about? Is our only option to downgrade this machine back to 2003? It's not very usable this way. Just realized I didn't try a Detect/Repair; will do that & post back. Mark Stefan Blom wrote: FWIW, I have seen this as well. As far as I know, there is no fix or workaround available. :-( -- Stefan Blom Microsoft Word MVP "Mark Tangard" wrote in message ... We were confounded by MS's decision to remove the Style box from the default interface in 2007, but were able to add it to the QAT using the Customize dialog. Just recently it seems to have lost its innards. When you click its drop-down arrow you get a long dropdown list as before, but it's *empty* except for one entry showing the style at the cursor. Nghghh?? Any ideas why this happens? Happens in every doc. Typing a style's name or alias in the box applies it, as it should. But that only works if you've memorized them! Tried removing & re-adding the Style box to the QAT, no change. Help?? MT |
|
Thread Tools | |
Display Modes | |
|
|