A Microsoft Office (Excel, Word) forum. OfficeFrustration

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » OfficeFrustration forum » Microsoft Word » Tables
Site Map Home Register Authors List Search Today's Posts Mark Forums Read  

Formatting Table of Figures



 
 
Thread Tools Display Modes
  #1  
Old December 10th, 2008, 03:30 AM posted to microsoft.public.word.tables
Hu
external usenet poster
 
Posts: 5
Default Formatting Table of Figures

I have a number of photographs in a document for which I want to create a
Table of Pictures (figures). Some pictures are portrait mode and I have
typed a "caption" below the picture. Some pictures are in landscape and
rotated 90 degrees. For these I have had to create a blank space as part of
the picture itself in which I have typed in a "caption" as part of the
picture and therefore oriented (rotated) 90 degrees as part of the picture.
I understand I can mark each picture as a Caption and create the Table of
Figures from that--but I don't want the label to appear or be printed with
with the Caption (the pictures I have designated as captions) and I don't
want the text of the caption in the Table of Figures to show a number. For
example, I have tried setting each picture with a different label but the
caption always includes number "1" as part of the caption containing the new
text I have assigned to the individual picture.

I hope I have made this clear.
  #2  
Old December 10th, 2008, 09:38 AM posted to microsoft.public.word.tables
Stefan Blom
external usenet poster
 
Posts: 8,433
Default Formatting Table of Figures

For entries that shouldn't display in the document you can use TC fields,
which you can add to text via the Mark Table of Contents Entry dialog box
(press Alt+Shift+O to display the dialog box). See also
http://sbarnhill.mvps.org/WordFAQs/TOCTips.htm.

--
Stefan Blom
Microsoft Word MVP



"Hu" wrote in message
...
I have a number of photographs in a document for which I want to create a
Table of Pictures (figures). Some pictures are portrait mode and I have
typed a "caption" below the picture. Some pictures are in landscape and
rotated 90 degrees. For these I have had to create a blank space as part
of
the picture itself in which I have typed in a "caption" as part of the
picture and therefore oriented (rotated) 90 degrees as part of the
picture.
I understand I can mark each picture as a Caption and create the Table of
Figures from that--but I don't want the label to appear or be printed with
with the Caption (the pictures I have designated as captions) and I don't
want the text of the caption in the Table of Figures to show a number.
For
example, I have tried setting each picture with a different label but the
caption always includes number "1" as part of the caption containing the
new
text I have assigned to the individual picture.

I hope I have made this clear.



  #3  
Old December 11th, 2008, 03:39 AM posted to microsoft.public.word.tables
PamC via OfficeKB.com
external usenet poster
 
Posts: 585
Default Formatting Table of Figures

You don't have to use the caption feature to insert your captions. Instead,
type the text you want for the figure title and then apply the Caption style
to it. When you want to insert a table of figures, make sure you choose
"none" for the caption label while on the table of figures tab. Word will
then collect everything in the Caption style for the TOF. (Sorry, if the
dialog and tab names are wrong. I'm using W2007. I know the "process" is the
same, but names and places may have changed from W2003.)

If you are interested, the field code for the TOF would look like this: {
TOC \h \z \t "Caption,1" \c }

PamC


Hu wrote:
I have a number of photographs in a document for which I want to create a
Table of Pictures (figures). Some pictures are portrait mode and I have
typed a "caption" below the picture. Some pictures are in landscape and
rotated 90 degrees. For these I have had to create a blank space as part of
the picture itself in which I have typed in a "caption" as part of the
picture and therefore oriented (rotated) 90 degrees as part of the picture.
I understand I can mark each picture as a Caption and create the Table of
Figures from that--but I don't want the label to appear or be printed with
with the Caption (the pictures I have designated as captions) and I don't
want the text of the caption in the Table of Figures to show a number. For
example, I have tried setting each picture with a different label but the
caption always includes number "1" as part of the caption containing the new
text I have assigned to the individual picture.

I hope I have made this clear.


--
Message posted via http://www.officekb.com

  #4  
Old December 11th, 2008, 06:13 PM posted to microsoft.public.word.tables
Hu
external usenet poster
 
Posts: 5
Default Formatting Table of Figures



The problem I have with both these replies is that for a number of pictures
there is no "text"--the text is part of the picture and cannot be selected
apart from the entire picture. The reason I have to do some pictures this
way is as follows. Some pictures have the long axis horizontal (4-5 people
lined up next to each other. Because the document has the long axis
vertical, I have to rotate the picture 90 degrees so it will display better.
Were I not to rotate it, the constraints of the paper would "squish" it too
much in reducing it to fit the page. Since I can't find a way to type the
label underneath after the picture is rotated and pasted (I can only add a
white space underneath and as part of the picture and type the label into the
white space where it becomes a part of the picture). This leaves me with no
text that can be selected for a style, a caption etc, only a jpeg picture.
  #5  
Old December 11th, 2008, 06:29 PM posted to microsoft.public.word.tables
Suzanne S. Barnhill
external usenet poster
 
Posts: 31,786
Default Formatting Table of Figures

You can add the label as a text box, frame, or table cell and rotate the
text in it. A caption in a text box, however, won't be seen by the Table of
Figures in Word 2003 or earlier.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Hu" wrote in message
...


The problem I have with both these replies is that for a number of
pictures
there is no "text"--the text is part of the picture and cannot be selected
apart from the entire picture. The reason I have to do some pictures this
way is as follows. Some pictures have the long axis horizontal (4-5
people
lined up next to each other. Because the document has the long axis
vertical, I have to rotate the picture 90 degrees so it will display
better.
Were I not to rotate it, the constraints of the paper would "squish" it
too
much in reducing it to fit the page. Since I can't find a way to type the
label underneath after the picture is rotated and pasted (I can only add
a
white space underneath and as part of the picture and type the label into
the
white space where it becomes a part of the picture). This leaves me with
no
text that can be selected for a style, a caption etc, only a jpeg picture.



  #6  
Old December 11th, 2008, 08:51 PM posted to microsoft.public.word.tables
PamC via OfficeKB.com
external usenet poster
 
Posts: 585
Default Formatting Table of Figures

Hu,

I would have chosen to handle wide pictures by switching the page
orientation to landscape (via inserting section paired breaks). That way
you'd have no containers to deal with, and all captions could be handled the
same way.

Otherwise, I'd do as Susanne suggests: use a table and rotated type. All
captions could still be handled the same way.

Given that it's done your way, if a TC field could be attached to an image,
you could combine our two answers. Styles when you have text and TC fields
when you don't.

PamC

Hu wrote:
The problem I have with both these replies is that for a number of pictures
there is no "text"--the text is part of the picture and cannot be selected
apart from the entire picture. The reason I have to do some pictures this
way is as follows. Some pictures have the long axis horizontal (4-5 people
lined up next to each other. Because the document has the long axis
vertical, I have to rotate the picture 90 degrees so it will display better.
Were I not to rotate it, the constraints of the paper would "squish" it too
much in reducing it to fit the page. Since I can't find a way to type the
label underneath after the picture is rotated and pasted (I can only add a
white space underneath and as part of the picture and type the label into the
white space where it becomes a part of the picture). This leaves me with no
text that can be selected for a style, a caption etc, only a jpeg picture.


--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...ables/200812/1

  #7  
Old December 21st, 2008, 09:52 PM posted to microsoft.public.word.tables
Hu
external usenet poster
 
Posts: 5
Default Formatting Table of Figures



"PamC via OfficeKB.com" wrote:

Hu,

I would have chosen to handle wide pictures by switching the page
orientation to landscape (via inserting section paired breaks). That way
you'd have no containers to deal with, and all captions could be handled the
same way.

Otherwise, I'd do as Susanne suggests: use a table and rotated type. All
captions could still be handled the same way.

Given that it's done your way, if a TC field could be attached to an image,
you could combine our two answers. Styles when you have text and TC fields
when you don't.

PamC

Hu wrote:
The problem I have with both these replies is that for a number of pictures
there is no "text"--the text is part of the picture and cannot be selected
apart from the entire picture. The reason I have to do some pictures this
way is as follows. Some pictures have the long axis horizontal (4-5 people
lined up next to each other. Because the document has the long axis
vertical, I have to rotate the picture 90 degrees so it will display better.
Were I not to rotate it, the constraints of the paper would "squish" it too
much in reducing it to fit the page. Since I can't find a way to type the
label underneath after the picture is rotated and pasted (I can only add a
white space underneath and as part of the picture and type the label into the
white space where it becomes a part of the picture). This leaves me with no
text that can be selected for a style, a caption etc, only a jpeg picture.


--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...ables/200812/1


  #8  
Old December 21st, 2008, 10:01 PM posted to microsoft.public.word.tables
Hu
external usenet poster
 
Posts: 5
Default Formatting Table of Figures



"PamC via OfficeKB.com" wrote:

Hu,

I would have chosen to handle wide pictures by switching the page
orientation to landscape (via inserting section paired breaks). That way
you'd have no containers to deal with, and all captions could be handled the
same way.

Otherwise, I'd do as Susanne suggests: use a table and rotated type. All
captions could still be handled the same way.

Given that it's done your way, if a TC field could be attached to an image,
you could combine our two answers. Styles when you have text and TC fields
when you don't.

PamC

Hu wrote:
The problem I have with both these replies is that for a number of pictures
there is no "text"--the text is part of the picture and cannot be selected
apart from the entire picture. The reason I have to do some pictures this
way is as follows. Some pictures have the long axis horizontal (4-5 people
lined up next to each other. Because the document has the long axis
vertical, I have to rotate the picture 90 degrees so it will display better.
Were I not to rotate it, the constraints of the paper would "squish" it too
much in reducing it to fit the page. Since I can't find a way to type the
label underneath after the picture is rotated and pasted (I can only add a
white space underneath and as part of the picture and type the label into the
white space where it becomes a part of the picture). This leaves me with no
text that can be selected for a style, a caption etc, only a jpeg picture.


--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...ables/200812/1

This project is the first time I have ever tried to use Word's formatting etc features. Because of that I doubt I really understood the replies I received. The ones I attempted didn't seem to work.


Because the number of pictures was less than a full page, I just went ahead
and typed a picture ID on a line, used "periods" to take me out to the end
and then typed in page numbers. With a left alignment and then selecting a
part of the "periods separators" I then increased or decreased the character
separation so that the page numbers would be properly right aligned. the
page looks just like a Table of Figures would.

I appreciate the suggestions and only wish I knew more about Word to have
been able to use them. However what I ended up with will print in the final
product just as a "proper" Table of Figures
  #9  
Old December 21st, 2008, 10:21 PM posted to microsoft.public.word.tables
Suzanne S. Barnhill
external usenet poster
 
Posts: 31,786
Default Formatting Table of Figures

You should still have used a right-aligned tab with a period leader (instead
of manually inserted periods) for your TOF listings; see
http://word.mvps.org/FAQs/Formatting/SettingTabs.htm

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Hu" wrote in message
...


"PamC via OfficeKB.com" wrote:

Hu,

I would have chosen to handle wide pictures by switching the page
orientation to landscape (via inserting section paired breaks). That way
you'd have no containers to deal with, and all captions could be handled
the
same way.

Otherwise, I'd do as Susanne suggests: use a table and rotated type. All
captions could still be handled the same way.

Given that it's done your way, if a TC field could be attached to an
image,
you could combine our two answers. Styles when you have text and TC
fields
when you don't.

PamC

Hu wrote:
The problem I have with both these replies is that for a number of
pictures
there is no "text"--the text is part of the picture and cannot be
selected
apart from the entire picture. The reason I have to do some pictures
this
way is as follows. Some pictures have the long axis horizontal (4-5
people
lined up next to each other. Because the document has the long axis
vertical, I have to rotate the picture 90 degrees so it will display
better.
Were I not to rotate it, the constraints of the paper would "squish" it
too
much in reducing it to fit the page. Since I can't find a way to type
the
label underneath after the picture is rotated and pasted (I can only
add a
white space underneath and as part of the picture and type the label
into the
white space where it becomes a part of the picture). This leaves me
with no
text that can be selected for a style, a caption etc, only a jpeg
picture.


--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...ables/200812/1

This project is the first time I have ever tried to use Word's formatting
etc features. Because of that I doubt I really understood the replies I
received. The ones I attempted didn't seem to work.


Because the number of pictures was less than a full page, I just went
ahead
and typed a picture ID on a line, used "periods" to take me out to the end
and then typed in page numbers. With a left alignment and then selecting
a
part of the "periods separators" I then increased or decreased the
character
separation so that the page numbers would be properly right aligned. the
page looks just like a Table of Figures would.

I appreciate the suggestions and only wish I knew more about Word to have
been able to use them. However what I ended up with will print in the
final
product just as a "proper" Table of Figures



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:23 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 OfficeFrustration.
The comments are property of their posters.