If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Macro to apply parsing rules for strings and list the substrings
Dear All,
I'm looking for detect and list the substrings (bellow cell "A3") for a given string (on cell "A1") that must be generated for one or more general rule(s). I have almost 100 different rules that can be applied alone or together one to the other. Do you have any idea about how could I do that? The rules are listed bellow and I put an example. Rules: According to these rules, letters in a string undergoing parse are designated in the left or right direction from the parsed letter. There are some exceptions related to the presence of one or more letters sorrounding some specific point of parse. Parsing rules: Rule Parse where? Exceptions 1 Right side of K or R if P is Right to K or R 2 Right side of K or R 3 Right side of K or R if P is Right to K or R; after K in CKY, DKD, CKH, CKD, KKR; after R in RRH, RRR, CRK, DRD, RRF, KRR 4 Right side of K 5 Left side of K 6 Right side of M 7 Right side of R if P is Right to R 8 Left side of D 9 Left side of D, Right side of K 10 Left side of D or E 11 Right side of E if P is Right to E, or if E is Right to E 12 Right side of D or E if P is Right to D or E, or if E is Right to D or E 13 Right side of D, E and K if P is Right to D or E, or if E is Right to D or E 14 Right side of F, L, M, W, Y if P is Right to F, L, M, W, Y, if P is Left to Y 15 Right side of F, Y, W if P is Right to F, Y, W, if P is Left to Y 16 Right side of K, R, F, Y, W if P is Right to K, R, F, Y, W, if P is Left to Y 17 Right side of F, L 18 Right side of F, L, W, Y, A, E, Q 19 Right side of A, F, Y, W, L, I, V 20 Left side of A, F, I, L, M, V if D or E is Left to A, F, I, L, M, V Examples: String: AGFSAFSAHASGASHSGHHSRASAKSASFDDAKPASASAFDAGSRPASSD ADASAPSASDASDASSRADSKADSKK Using Rule 1: AGFSAFSAHASGASHSGHHSR ASAK SASFDDAKPASASAFDAGSRPASSDADASAPSASDASDASSR ADSK ADSK K Using Rule 8: AGFSAFSAHASGASHSGHHSRASAKSASF D DAKPASASAF DAGSRPASS DA DASAPSAS DAS DASSRA DSKA DSKK Using Rules 1 and 17 AGF SAF SAHASGASHSGHHSR ASAK SASF DDAKPASASAF DAGSRPASSDADASAPSASDASDASSR ADSK ADSK K |
#2
|
|||
|
|||
Macro to apply parsing rules for strings and list the substrings
Luciano,
A lot of these simpler rules would be easy to implement For example, rule 2 Function Rule2(strVal As String) As Variant Rule2 = Application.Transpose(Split(Replace(Replace(strVal , "K", "K "), "R", "R "), " ")) End Function If your string is in cell A1, your could select A2:A10 and enter using Ctrl-Shift-Enter =Rule2(A1) Other rules would require stepping through and checking each instance, but before I do an example of that, if you could answer one question: Is there a letter that will NEVER appear in your strings? HTH, Bernie MS Excel MVP "Luciano Paulino da Silva" wrote in message ... Dear All, I'm looking for detect and list the substrings (bellow cell "A3") for a given string (on cell "A1") that must be generated for one or more general rule(s). I have almost 100 different rules that can be applied alone or together one to the other. Do you have any idea about how could I do that? The rules are listed bellow and I put an example. Rules: According to these rules, letters in a string undergoing parse are designated in the left or right direction from the parsed letter. There are some exceptions related to the presence of one or more letters sorrounding some specific point of parse. Parsing rules: Rule Parse where? Exceptions 1 Right side of K or R if P is Right to K or R 2 Right side of K or R 3 Right side of K or R if P is Right to K or R; after K in CKY, DKD, CKH, CKD, KKR; after R in RRH, RRR, CRK, DRD, RRF, KRR 4 Right side of K 5 Left side of K 6 Right side of M 7 Right side of R if P is Right to R 8 Left side of D 9 Left side of D, Right side of K 10 Left side of D or E 11 Right side of E if P is Right to E, or if E is Right to E 12 Right side of D or E if P is Right to D or E, or if E is Right to D or E 13 Right side of D, E and K if P is Right to D or E, or if E is Right to D or E 14 Right side of F, L, M, W, Y if P is Right to F, L, M, W, Y, if P is Left to Y 15 Right side of F, Y, W if P is Right to F, Y, W, if P is Left to Y 16 Right side of K, R, F, Y, W if P is Right to K, R, F, Y, W, if P is Left to Y 17 Right side of F, L 18 Right side of F, L, W, Y, A, E, Q 19 Right side of A, F, Y, W, L, I, V 20 Left side of A, F, I, L, M, V if D or E is Left to A, F, I, L, M, V Examples: String: AGFSAFSAHASGASHSGHHSRASAKSASFDDAKPASASAFDAGSRPASSD ADASAPSASDASDASSRADSKADSKK Using Rule 1: AGFSAFSAHASGASHSGHHSR ASAK SASFDDAKPASASAFDAGSRPASSDADASAPSASDASDASSR ADSK ADSK K Using Rule 8: AGFSAFSAHASGASHSGHHSRASAKSASF D DAKPASASAF DAGSRPASS DA DASAPSAS DAS DASSRA DSKA DSKK Using Rules 1 and 17 AGF SAF SAHASGASHSGHHSR ASAK SASF DDAKPASASAF DAGSRPASSDADASAPSASDASDASSR ADSK ADSK K |
#3
|
|||
|
|||
Macro to apply parsing rules for strings and list the substrings
Bernie,
OK, We will have just 20 types of letters: A, C, D, E, F, G, H, I, K, L, M, N, P, Q, R, S, T, V, X For some situations, I will have some new future rules and it is possible that in several cases I will have to apply more than one rule simultaneously. Thanks in advance, Luciano On 16 abr, 15:10, "Bernie Deitrick" deitbe @ consumer dot org wrote: Luciano, A lot of these simpler rules would be easy to implement For example, rule 2 Function Rule2(strVal As String) As Variant * *Rule2 = Application.Transpose(Split(Replace(Replace(strVal , "K", "K "), "R", "R "), " ")) End Function If your string is in cell A1, your could select A2:A10 and enter using Ctrl-Shift-Enter =Rule2(A1) Other rules would require stepping through and checking each instance, but before I do an example of that, if you could answer one question: Is there a letter that will NEVER appear in your strings? HTH, Bernie MS Excel MVP "Luciano Paulino da Silva" wrote in ... Dear All, I'm looking for detect and list the substrings (bellow cell "A3") for a given string (on cell "A1") that must be generated for one or more general rule(s). I have almost 100 different rules that can be applied alone or together one to the other. Do you have any idea about how could I do that? The rules are listed bellow and I put an example. Rules: According to these rules, letters in a string undergoing parse are designated in the left or right direction from the parsed letter. There are some exceptions related to the presence of one or more letters sorrounding some specific point of parse. Parsing rules: Rule Parse where? * * * * * * * * * * * * * * * *Exceptions 1 Right side of K or R * * * * * * * * * * * *if P is Right to K or R 2 * * * Right side of K or R 3 * * * Right side of K or R * * * * * * * * * * * *if P is Right to K or R; after K in CKY, DKD, CKH, CKD, KKR; after R in RRH, RRR, CRK, DRD, RRF, KRR 4 Right side of K 5 Left side of K 6 Right side of M 7 Right side of R * * * * * * * * * * * *if P is Right to R 8 Left side of D 9 Left side of D, Right side of K 10 Left side of D or E 11 Right side of E * * * * * * * * * * * *if P is Right to E, or if E is Right to E 12 Right side of D or E * * * * * * * * * * * *if P is Right to D or E, or if E is Right to D or E 13 Right side of D, E and K * * * * * * * *if P is Right to D or E, or if E is Right to D or E 14 *Right side of F, L, M, W, Y * * * * * * * *if P is Right to F, L, M, W, Y, if P is Left to Y 15 *Right side of F, Y, W * * * * * * * * * * * *if P is Right to F, Y, W, if P is Left to Y 16 Right side of K, R, F, Y, W * * * * * * * *if P is Right to K, R, F, Y, W, if P is Left to Y 17 Right side of F, L 18 Right side of F, L, W, Y, A, E, Q 19 Right side of A, F, Y, W, L, I, V 20 Left side of A, F, I, L, M, V * * * * * * * *if D or E is Left to A, F, I, L, M, V Examples: String: AGFSAFSAHASGASHSGHHSRASAKSASFDDAKPASASAFDAGSRPASSD ADASAPSASDASDASSRADSKADSKK Using Rule 1: AGFSAFSAHASGASHSGHHSR ASAK SASFDDAKPASASAFDAGSRPASSDADASAPSASDASDASSR ADSK ADSK K Using Rule 8: AGFSAFSAHASGASHSGHHSRASAKSASF D DAKPASASAF DAGSRPASS DA DASAPSAS DAS DASSRA DSKA DSKK Using Rules 1 and 17 AGF SAF SAHASGASHSGHHSR ASAK SASF DDAKPASASAF DAGSRPASSDADASAPSASDASDASSR ADSK ADSK K |
#4
|
|||
|
|||
Macro to apply parsing rules for strings and list the substrings
I`m very happy that you said that a lot of the rules are simple to
implemnt. I have successfuly tested that one you send me. Thank for your help with this. Luciano On 16 abr, 21:08, Luciano Paulino da Silva wrote: Bernie, OK, We will have just 20 types of letters: A, C, D, E, F, G, H, I, K, L, M, N, P, Q, R, S, T, V, X For some situations, I will have some new future rules and it is possible that in several cases I will have to apply more than one rule simultaneously. Thanks in advance, Luciano On 16 abr, 15:10, "Bernie Deitrick" deitbe @ consumer dot org wrote: Luciano, A lot of these simpler rules would be easy to implement For example, rule 2 Function Rule2(strVal As String) As Variant * *Rule2 = Application.Transpose(Split(Replace(Replace(strVal , "K", "K "), "R", "R "), " ")) End Function If your string is in cell A1, your could select A2:A10 and enter using Ctrl-Shift-Enter =Rule2(A1) Other rules would require stepping through and checking each instance, but before I do an example of that, if you could answer one question: Is there a letter that will NEVER appear in your strings? HTH, Bernie MS Excel MVP "Luciano Paulino da Silva" wrote in .... Dear All, I'm looking for detect and list the substrings (bellow cell "A3") for a given string (on cell "A1") that must be generated for one or more general rule(s). I have almost 100 different rules that can be applied alone or together one to the other. Do you have any idea about how could I do that? The rules are listed bellow and I put an example. Rules: According to these rules, letters in a string undergoing parse are designated in the left or right direction from the parsed letter. There are some exceptions related to the presence of one or more letters sorrounding some specific point of parse. Parsing rules: Rule Parse where? * * * * * * * * * * * * * * * *Exceptions 1 Right side of K or R * * * * * * * * * * * *if P is Right to K or R 2 * * * Right side of K or R 3 * * * Right side of K or R * * * * * * * * * * * *if P is Right to K or R; after K in CKY, DKD, CKH, CKD, KKR; after R in RRH, RRR, CRK, DRD, RRF, KRR 4 Right side of K 5 Left side of K 6 Right side of M 7 Right side of R * * * * * * * * * * * *if P is Right to R 8 Left side of D 9 Left side of D, Right side of K 10 Left side of D or E 11 Right side of E * * * * * * * * * * * *if P is Right to E, or if E is Right to E 12 Right side of D or E * * * * * * * * * * * *if P is Right to D or E, or if E is Right to D or E 13 Right side of D, E and K * * * * * * * *if P is Right to D or E, or if E is Right to D or E 14 *Right side of F, L, M, W, Y * * * * * * * *if P is Right to F, L, M, W, Y, if P is Left to Y 15 *Right side of F, Y, W * * * * * * * * * * * *if P is Right to F, Y, W, if P is Left to Y 16 Right side of K, R, F, Y, W * * * * * * * *if P is Right to K, R, F, Y, W, if P is Left to Y 17 Right side of F, L 18 Right side of F, L, W, Y, A, E, Q 19 Right side of A, F, Y, W, L, I, V 20 Left side of A, F, I, L, M, V * * * * * * * *if D or E is Left to A, F, I, L, M, V Examples: String: AGFSAFSAHASGASHSGHHSRASAKSASFDDAKPASASAFDAGSRPASSD ADASAPSASDASDASSRADSKADSKK Using Rule 1: AGFSAFSAHASGASHSGHHSR ASAK SASFDDAKPASASAFDAGSRPASSDADASAPSASDASDASSR ADSK ADSK K Using Rule 8: AGFSAFSAHASGASHSGHHSRASAKSASF D DAKPASASAF DAGSRPASS DA DASAPSAS DAS DASSRA DSKA DSKK Using Rules 1 and 17 AGF SAF SAHASGASHSGHHSR ASAK SASF DDAKPASASAF DAGSRPASSDADASAPSASDASDASSR ADSK ADSK K |
#5
|
|||
|
|||
Macro to apply parsing rules for strings and list the substrings
On Wed, 15 Apr 2009 10:49:37 -0700 (PDT), Luciano Paulino da Silva
wrote: Dear All, I'm looking for detect and list the substrings (bellow cell "A3") for a given string (on cell "A1") that must be generated for one or more general rule(s). I have almost 100 different rules that can be applied alone or together one to the other. Do you have any idea about how could I do that? The rules are listed bellow and I put an example. Rules: According to these rules, letters in a string undergoing parse are designated in the left or right direction from the parsed letter. There are some exceptions related to the presence of one or more letters sorrounding some specific point of parse. Parsing rules: Rule Parse where? Exceptions 1 Right side of K or R if P is Right to K or R 2 Right side of K or R 3 Right side of K or R if P is Right to K or R; after K in CKY, DKD, CKH, CKD, KKR; after R in RRH, RRR, CRK, DRD, RRF, KRR 4 Right side of K 5 Left side of K 6 Right side of M 7 Right side of R if P is Right to R 8 Left side of D 9 Left side of D, Right side of K 10 Left side of D or E 11 Right side of E if P is Right to E, or if E is Right to E 12 Right side of D or E if P is Right to D or E, or if E is Right to D or E 13 Right side of D, E and K if P is Right to D or E, or if E is Right to D or E 14 Right side of F, L, M, W, Y if P is Right to F, L, M, W, Y, if P is Left to Y 15 Right side of F, Y, W if P is Right to F, Y, W, if P is Left to Y 16 Right side of K, R, F, Y, W if P is Right to K, R, F, Y, W, if P is Left to Y 17 Right side of F, L 18 Right side of F, L, W, Y, A, E, Q 19 Right side of A, F, Y, W, L, I, V 20 Left side of A, F, I, L, M, V if D or E is Left to A, F, I, L, M, V Examples: String: AGFSAFSAHASGASHSGHHSRASAKSASFDDAKPASASAFDAGSRPASS DADASAPSASDASDASSRADSKADSKK Using Rule 1: AGFSAFSAHASGASHSGHHSR ASAK SASFDDAKPASASAFDAGSRPASSDADASAPSASDASDASSR ADSK ADSK K Using Rule 8: AGFSAFSAHASGASHSGHHSRASAKSASF D DAKPASASAF DAGSRPASS DA DASAPSAS DAS DASSRA DSKA DSKK Using Rules 1 and 17 AGF SAF SAHASGASHSGHHSR ASAK SASF DDAKPASASAF DAGSRPASSDADASAPSASDASDASSR ADSK ADSK K You could implement each rule as a Regular Expression, and then select the rule(s) you wish to apply. For example, a routine with the Regular Expressions for rules 1,2,8,17 already figured out for you, and which allows the application of multiple rules on a given string, might look like the code below. You select a cell which contains your string and then execute the macro. You can enter one or more rules -- enter them by number space separated. The macro will then apply each rule in order, and output the results in the rows below your selected cell, skipping the row immediately below (so that if your data is in A1, the strings will start in A3. There are other methods of implementing your rules than Regular Expressions, but with so many rules, this would be the simplest for me. ================================= Option Explicit Sub ParseSpecial() Dim c As Range Dim i As Long, j As Long Dim vRule As Variant Dim aRule(1 To 100) As String Dim aResRule1() As String Dim aResRule2() As String Dim re As Object, mc As Object, m As Object 'Rules 'construct so that all strings will have at least 'one match 'store each rule number in the corresponding element of 'the aRule array aRule(1) = "([^KR]|[KR]P)+[KR]?|[KR]" aRule(2) = "[^KR]+[KR]?|[KR]" aRule(8) = "D?[^D]+|D" aRule(17) = "[^FL]+[FL]?|[FL]" vRule = _ Split(InputBox("Rule Number (for multiple rules, separate with space): ")) Set c = Selection 'or whatever If c.Count 1 Then MsgBox ("Can only select one cell") 'but could add code to iterate through a ' bunch of cells Exit Sub End If 'add more code to ensure validity of rule number ' -------------------------- ReDim aResRule1(0) aResRule1(0) = c.Value Set re = CreateObject("vbscript.regexp") re.IgnoreCase = False re.Global = True For j = 0 To UBound(vRule) re.Pattern = aRule(vRule(j)) ReDim aResRule2(UBound(aResRule1)) 'move current results to aResRule2 For i = 0 To UBound(aResRule1) aResRule2(i) = aResRule1(i) Next i 'clear out aResRule1 ReDim aResRule1(0) For i = 0 To UBound(aResRule2) Set mc = re.Execute(aResRule2(i)) For Each m In mc If Len(aResRule1(0)) 0 Then ReDim Preserve aResRule1(UBound(aResRule1) + 1) End If aResRule1(UBound(aResRule1)) = m Next m Next i Next j 'clear and write results below WriteResults aResRule1, c.Offset(2, 0) End Sub Sub WriteResults(res, rDest As Range) 'clear out range for results Range(rDest, rDest.End(xlDown)).Clear Dim i As Long For i = 0 To UBound(res) rDest(i + 1, 1).Value = res(i) Next i With rDest(i + 1, 1) .Value = "End of List of Strings" .Font.Italic = True .Font.Bold = True .Font.Color = vbRed End With End Sub ============================= --ron |
#6
|
|||
|
|||
Macro to apply parsing rules for strings and list the substrings
On 17 abr, 22:32, Ron Rosenfeld wrote:
On Wed, 15 Apr 2009 10:49:37 -0700 (PDT), Luciano Paulino da Silva wrote: Dear All, I'm looking for detect and list the substrings (bellow cell "A3") for a given string (on cell "A1") that must be generated for one or more general rule(s). I have almost 100 different rules that can be applied alone or together one to the other. Do you have any idea about how could I do that? The rules are listed bellow and I put an example. Rules: According to these rules, letters in a string undergoing parse are designated in the left or right direction from the parsed letter. There are some exceptions related to the presence of one or more letters sorrounding some specific point of parse. Parsing rules: Rule * * * *Parse where? * * * * * * * * * * * * * * * * * Exceptions 1 * Right side of K or R * * * * * * * * * * * * * if P is Right to K or R 2 * * * Right side of K or R 3 * * * Right side of K or R * * * * * * * * * * * * * * * if P is Right to K or R; after K in CKY, DKD, CKH, CKD, KKR; after R in RRH, RRR, CRK, DRD, RRF, KRR 4 * Right side of K 5 * Left side of K 6 * Right side of M 7 * Right side of R * * * * * * * * * * * * * * * *if P is Right to R 8 * Left side of D 9 * Left side of D, Right side of K 10 *Left side of D or E 11 *Right side of E * * * * * * * * * * * * * * * *if P is Right to E, or if E is Right to E 12 *Right side of D or E * * * * * * * * * * * * * if P is Right to D or E, or if E is Right to D or E 13 *Right side of D, E and K * * * * * * * * * * * if P is Right to D or E, or if E is Right to D or E 14 * * * * *Right side of F, L, M, W, Y * * * * * * * * * *if P is Right to F, L, M, W, Y, if P is Left to Y 15 * * * * *Right side of F, Y, W * * * * * * * * * * * * *if P is Right to F, Y, W, if P is Left to Y 16 *Right side of K, R, F, Y, W * * * * * * * * * *if P is Right to K, R, F, Y, W, if P is Left to Y 17 *Right side of F, L 18 *Right side of F, L, W, Y, A, E, Q 19 *Right side of A, F, Y, W, L, I, V 20 *Left side of A, F, I, L, M, V * * * * * * * * *if D or E is Left to A, F, I, L, M, V Examples: String: AGFSAFSAHASGASHSGHHSRASAKSASFDDAKPASASAFDAGSRPASS DADASAPSASDASDASSRADSKADSKK Using Rule 1: AGFSAFSAHASGASHSGHHSR ASAK SASFDDAKPASASAFDAGSRPASSDADASAPSASDASDASSR ADSK ADSK K Using Rule 8: AGFSAFSAHASGASHSGHHSRASAKSASF D DAKPASASAF DAGSRPASS DA DASAPSAS DAS DASSRA DSKA DSKK Using Rules 1 and 17 AGF SAF SAHASGASHSGHHSR ASAK SASF DDAKPASASAF DAGSRPASSDADASAPSASDASDASSR ADSK ADSK K You could implement each rule as a Regular Expression, and then select the rule(s) you wish to apply. For example, a routine with the Regular Expressions for rules 1,2,8,17 already figured out for you, and which allows the application of multiple rules on a given string, might look like the code below. You select a cell which contains your string and then execute the macro. *You can enter one or more rules -- enter them by number space separated. The macro will then apply each rule in order, and output the results in the rows below your selected cell, skipping the row immediately below (so that if your data is in A1, the strings will start in A3. There are other methods of implementing your rules than Regular Expressions, but with so many rules, this would be the simplest for me. ================================= Option Explicit Sub ParseSpecial() Dim c As Range Dim i As Long, j As Long Dim vRule As Variant Dim aRule(1 To 100) As String Dim aResRule1() As String Dim aResRule2() As String Dim re As Object, mc As Object, m As Object 'Rules 'construct so that all strings will have at least 'one match 'store each rule number in the corresponding element of 'the aRule array aRule(1) = "([^KR]|[KR]P)+[KR]?|[KR]" aRule(2) = "[^KR]+[KR]?|[KR]" aRule(8) = "D?[^D]+|D" aRule(17) = "[^FL]+[FL]?|[FL]" vRule = _ * Split(InputBox("Rule Number (for multiple rules, separate with space): ")) Set c = Selection 'or whatever If c.Count 1 Then * * MsgBox ("Can only select one cell") * * 'but could add code to iterate through a * * ' *bunch of cells * * Exit Sub End If 'add more code to ensure validity of rule number ' -------------------------- ReDim aResRule1(0) aResRule1(0) = c.Value Set re = CreateObject("vbscript.regexp") * * re.IgnoreCase = False * * re.Global = True For j = 0 To UBound(vRule) * * re.Pattern = aRule(vRule(j)) * * ReDim aResRule2(UBound(aResRule1)) * * 'move current results to aResRule2 * * * * For i = 0 To UBound(aResRule1) * * * * * * aResRule2(i) = aResRule1(i) * * * * Next i * * 'clear out aResRule1 * * ReDim aResRule1(0) * * For i = 0 To UBound(aResRule2) * * * * Set mc = re.Execute(aResRule2(i)) * * * * * * For Each m In mc * * * * * * * * If Len(aResRule1(0)) 0 Then * * * * * * * * * * ReDim Preserve aResRule1(UBound(aResRule1) + 1) * * * * * * * * End If * * * * * * * * * * aResRule1(UBound(aResRule1)) = m * * * * * * Next m * * *Next i Next j 'clear and write results below WriteResults aResRule1, c.Offset(2, 0) End Sub Sub WriteResults(res, rDest As Range) 'clear out range for results Range(rDest, rDest.End(xlDown)).Clear Dim i As Long * * For i = 0 To UBound(res) * * * * rDest(i + 1, 1).Value = res(i) * * Next i With rDest(i + 1, 1) * * .Value = "End of List of Strings" * * .Font.Italic = True * * .Font.Bold = True * * .Font.Color = vbRed End With End Sub ============================= --ron Dear Ron, Excelent!!! Thank you very much! Luciano |
#7
|
|||
|
|||
Macro to apply parsing rules for strings and list the substrings
On Sat, 18 Apr 2009 07:50:32 -0700 (PDT), Luciano Paulino da Silva
wrote: Dear Ron, Excelent!!! Thank you very much! Luciano You're welcome. Glad to help. Thanks for the feedback. Here are some links to information regarding Regular Expressions, if you need them: Regular Expressions http://www.regular-expressions.info/reference.html http://support.microsoft.com/default...02&Product=vbb http://msdn2.microsoft.com/en-us/library/6wzad2b2.aspx http://msdn2.microsoft.com/en-us/library/ms974619.aspx --ron |
#8
|
|||
|
|||
Macro to apply parsing rules for strings and list the substrings
On 18 abr, 15:18, Ron Rosenfeld wrote:
On Sat, 18 Apr 2009 07:50:32 -0700 (PDT), Luciano Paulino da Silva wrote: Dear Ron, Excelent!!! Thank you very much! Luciano You're welcome. *Glad to help. *Thanks for the feedback. Here are some links to information regarding Regular Expressions, if you need them: Regular Expressionshttp://www.regular-expressions.info/reference.htmlhttp://support.microsoft.com/default.aspx?scid=kb;en-us;818802&Produc...http://msdn2.microsoft.com/en-us/lib.../ms974619.aspx --ron Thank you Ron! I will study the regular expressions and implement the code. Best regards, Luciano |
#9
|
|||
|
|||
Macro to apply parsing rules for strings and list the substrings
On 18 abr, 15:18, Ron Rosenfeld wrote:
On Sat, 18 Apr 2009 07:50:32 -0700 (PDT), Luciano Paulino da Silva wrote: Dear Ron, Excelent!!! Thank you very much! Luciano You're welcome. *Glad to help. *Thanks for the feedback. Here are some links to information regarding Regular Expressions, if you need them: Regular Expressionshttp://www.regular-expressions.info/reference.htmlhttp://support.microsoft.com/default.aspx?scid=kb;en-us;818802&Produc...http://msdn2.microsoft.com/en-us/lib.../ms974619.aspx --ron I`m trying but for several situations I could not implement the rules... :-/ |
#10
|
|||
|
|||
Macro to apply parsing rules for strings and list the substrings
On Sat, 18 Apr 2009 18:12:42 -0700 (PDT), Luciano Paulino da Silva
wrote: On 18 abr, 15:18, Ron Rosenfeld wrote: On Sat, 18 Apr 2009 07:50:32 -0700 (PDT), Luciano Paulino da Silva wrote: Dear Ron, Excelent!!! Thank you very much! Luciano You're welcome. *Glad to help. *Thanks for the feedback. Here are some links to information regarding Regular Expressions, if you need them: Regular Expressionshttp://www.regular-expressions.info/reference.htmlhttp://support.microsoft.com/default.aspx?scid=kb;en-us;818802&Produc...http://msdn2.microsoft.com/en-us/lib.../ms974619.aspx --ron I`m trying but for several situations I could not implement the rules... :-/ Well, post them and I or someone will give it a try. In addition to the rules, also post the source string and the expected results. I don't mind doing a few. --ron |
Thread Tools | |
Display Modes | |
|
|