How can I change the tab but keep the row and column constant when

Max-

It's not working...your equation is changing the "A1" to "A2" etc... when I
want the rows and columns to remain the same and just change the tab/sheet
number. from 001 to 002 to 003 etc... Anymore suggestions?

"Max" wrote:

='001'!$I$46...and when I drag it down I want it to pick up sheet
'002'!$I$46
for the next line, '003'!$I$46 for the line after...etc.

One way ..

Use: =INDIRECT("'00"&ROW(A1)&"'!I46")
and copy down
--
Max
Singapore
http://savefile.com/projects/236895
xdemechanik
---
"MG" wrote:
How can I change the tab but keep the row and column constant when filling in
equations?

I'm orgainizing a excel spreadsheet in which I have many sheets/tabs in.
I'm trying to put a formula in on my main page where I can get the data from
many different sheets while keeping my column and row constant on each page.
I'm trying to do this so I can drag this down and it will automatically
switch pages and while keeping column and roc constant. Example, my main
tab/sheet is labeled "MIKE" and I want to put information from many different
tabs/sheets in column "I" on the main page. Right now I've got the formula
='001'!$l$46...and when I drag it down I want it to pick up sheet '002'!$l$46
for the next line, '003'!$l$46 for the line after...etc. Is there anyway I
can do that?? If someone could help me out I'd greatly appreciate.

=INDIRECT(TEXT(ROW()-ROW($I$4),"000") & "!$L$46")

In your original post, I couldn't tell what your desired cell address was....

HTH,
Bernie
MS Excel MVP


"MG" wrote in message
news
Didn't work. I have numerous tabs "001", "002", "003" etc and on each one of
them in column L and Row 46 I have information I want to transfer to column I
on my main page "Mike". When I fill in the equation down I want the row and
column part to remain and change the page number each time. Any other ideas?

"Bernie Deitrick" wrote:

Mike?,

If your sheet tabs are always three digit numbers, you could use, for example, this formula,
entered
into a cell I5:

=INDIRECT(TEXT(ROW()-ROW($I$4),"000") & "!$I$46")

Note that the cell reference (in this case $I$4) needs to be from the row just above the first
instance of the formula.

HTH,
Bernie
MS Excel MVP


"MG" wrote in message
news
How can I change the tab but keep the row and column constant when filling in
equations?

I'm orgainizing a excel spreadsheet in which I have many sheets/tabs in.
I'm trying to put a formula in on my main page where I can get the data from
many different sheets while keeping my column and row constant on each page.
I'm trying to do this so I can drag this down and it will automatically
switch pages and while keeping column and roc constant. Example, my main
tab/sheet is labeled "MIKE" and I want to put information from many different
tabs/sheets in column "I" on the main page. Right now I've got the formula
='001'!$l$46...and when I drag it down I want it to pick up sheet '002'!$l$46
for the next line, '003'!$l$46 for the line after...etc. Is there anyway I
can do that?? If someone could help me out I'd greatly appreciate.

Try it! The only thing that changes is the sheet name


--
Regards,

Peo Sjoblom


"MG" wrote in message
...
Peo.

Didn't work. I have numerous tabs "001", "002", "003" etc and on each one
of
them in column L and Row 46 I have information I want to transfer to
column I
on my main page "Mike". When I fill in the equation down I want the row
and
column part to remain and change the page number each time. Any other
ideas?

"Peo Sjoblom" wrote:

=INDIRECT("'"&TEXT(ROWS($A$1:A1),"000")&"'!I46")


copied down will do what you want


--
Regards,

Peo Sjoblom



"MG" wrote in message
news
How can I change the tab but keep the row and column constant when
filling
in
equations?

I'm orgainizing a excel spreadsheet in which I have many sheets/tabs
in.
I'm trying to put a formula in on my main page where I can get the data
from
many different sheets while keeping my column and row constant on each
page.
I'm trying to do this so I can drag this down and it will automatically
switch pages and while keeping column and roc constant. Example, my
main
tab/sheet is labeled "MIKE" and I want to put information from many
different
tabs/sheets in column "I" on the main page. Right now I've got the
formula
='001'!$l$46...and when I drag it down I want it to pick up sheet
'002'!$l$46
for the next line, '003'!$l$46 for the line after...etc. Is there
anyway I
can do that?? If someone could help me out I'd greatly appreciate.

Gord...I couldn't find my old thread, having a little email problems at the
office. Still can't get this equation to work though.

"Gord Dibben" wrote:

Max

I posted the same answer yesterday to the same OP and also didn't think about
more than 10 sheets.

Wonder if OP ran into a problem and re-posted rather than staying in the same
thread?


Gord

On Tue, 19 Jun 2007 23:43:51 +0800, "Max" wrote:

Yes, that's right. It was careless of me. Pl dismiss it.
Go with Peo's better rendition.

Bernie,

I want the information from cells L46 on the other sheets "001", "002",
etc.. to go to column "I" of my first sheet "MIKE"

"Bernie Deitrick" wrote:

=INDIRECT(TEXT(ROW()-ROW($I$4),"000") & "!$L$46")

In your original post, I couldn't tell what your desired cell address was....

HTH,
Bernie
MS Excel MVP


"MG" wrote in message
news
Didn't work. I have numerous tabs "001", "002", "003" etc and on each one of
them in column L and Row 46 I have information I want to transfer to column I
on my main page "Mike". When I fill in the equation down I want the row and
column part to remain and change the page number each time. Any other ideas?

"Bernie Deitrick" wrote:

Mike?,

If your sheet tabs are always three digit numbers, you could use, for example, this formula,
entered
into a cell I5:

=INDIRECT(TEXT(ROW()-ROW($I$4),"000") & "!$I$46")

Note that the cell reference (in this case $I$4) needs to be from the row just above the first
instance of the formula.

HTH,
Bernie
MS Excel MVP


"MG" wrote in message
news How can I change the tab but keep the row and column constant when filling in
equations?

I'm orgainizing a excel spreadsheet in which I have many sheets/tabs in.
I'm trying to put a formula in on my main page where I can get the data from
many different sheets while keeping my column and row constant on each page.
I'm trying to do this so I can drag this down and it will automatically
switch pages and while keeping column and roc constant. Example, my main
tab/sheet is labeled "MIKE" and I want to put information from many different
tabs/sheets in column "I" on the main page. Right now I've got the formula
='001'!$l$46...and when I drag it down I want it to pick up sheet '002'!$l$46
for the next line, '003'!$l$46 for the line after...etc. Is there anyway I
can do that?? If someone could help me out I'd greatly appreciate.

I've been trying it with no luck.

=INDIRECT("'"&TEXT(ROWS($A$1:A1),"000")&"'!I46")
changes to
=INDIRECT("'"&TEXT(ROWS($A$1:A2),"000")&"'!I46") for the next line and,
=INDIRECT("'"&TEXT(ROWS($A$1:A3),"000")&"'!I46") and so on...its not
changing th sheet names....001, 002, 003, etc.



"Peo Sjoblom" wrote:

Try it! The only thing that changes is the sheet name


--
Regards,

Peo Sjoblom


"MG" wrote in message
...
Peo.

Didn't work. I have numerous tabs "001", "002", "003" etc and on each one
of
them in column L and Row 46 I have information I want to transfer to
column I
on my main page "Mike". When I fill in the equation down I want the row
and
column part to remain and change the page number each time. Any other
ideas?

"Peo Sjoblom" wrote:

=INDIRECT("'"&TEXT(ROWS($A$1:A1),"000")&"'!I46")


copied down will do what you want


--
Regards,

Peo Sjoblom



"MG" wrote in message
news How can I change the tab but keep the row and column constant when
filling
in
equations?

I'm orgainizing a excel spreadsheet in which I have many sheets/tabs
in.
I'm trying to put a formula in on my main page where I can get the data
from
many different sheets while keeping my column and row constant on each
page.
I'm trying to do this so I can drag this down and it will automatically
switch pages and while keeping column and roc constant. Example, my
main
tab/sheet is labeled "MIKE" and I want to put information from many
different
tabs/sheets in column "I" on the main page. Right now I've got the
formula
='001'!$l$46...and when I drag it down I want it to pick up sheet
'002'!$l$46
for the next line, '003'!$l$46 for the line after...etc. Is there
anyway I
can do that?? If someone could help me out I'd greatly appreciate.

You don't seem to understand what the formula does, this part

ROWS($A$1:A1)

should change

it's because you want the sheet names to change to

002 (which would be ROWS($A$1:A2))


and so on, it obviously shouldn't return the sheet name but what is in I46

If it doesn't work then it is because you either have spaces in the sheet
names, that you didn't explain in an understandable way what you wanted
(note that all answers are basically the same so I am not the only way
interpreting it this way) or you simply don't understand how to apply it
correctly


--
Regards,

Peo Sjoblom




"MG" wrote in message
...
I've been trying it with no luck.

=INDIRECT("'"&TEXT(ROWS($A$1:A1),"000")&"'!I46")
changes to
=INDIRECT("'"&TEXT(ROWS($A$1:A2),"000")&"'!I46") for the next line and,
=INDIRECT("'"&TEXT(ROWS($A$1:A3),"000")&"'!I46") and so on...its not
changing th sheet names....001, 002, 003, etc.



"Peo Sjoblom" wrote:

Try it! The only thing that changes is the sheet name


--
Regards,

Peo Sjoblom


"MG" wrote in message
...
Peo.

Didn't work. I have numerous tabs "001", "002", "003" etc and on each
one
of
them in column L and Row 46 I have information I want to transfer to
column I
on my main page "Mike". When I fill in the equation down I want the row
and
column part to remain and change the page number each time. Any other
ideas?

"Peo Sjoblom" wrote:

=INDIRECT("'"&TEXT(ROWS($A$1:A1),"000")&"'!I46")


copied down will do what you want


--
Regards,

Peo Sjoblom



"MG" wrote in message
news How can I change the tab but keep the row and column constant when
filling
in
equations?

I'm orgainizing a excel spreadsheet in which I have many
sheets/tabs
in.
I'm trying to put a formula in on my main page where I can get the
data
from
many different sheets while keeping my column and row constant on
each
page.
I'm trying to do this so I can drag this down and it will
automatically
switch pages and while keeping column and roc constant. Example, my
main
tab/sheet is labeled "MIKE" and I want to put information from many
different
tabs/sheets in column "I" on the main page. Right now I've got the
formula
='001'!$l$46...and when I drag it down I want it to pick up sheet
'002'!$l$46
for the next line, '003'!$l$46 for the line after...etc. Is there
anyway I
can do that?? If someone could help me out I'd greatly appreciate.

Peo,

Thanks I got it working now, what it was is that you thought it was I46 I
wanted when it was L46...letter's just got confused when typing lower and
upper cases. Also is there a way when you fill in the equation down the row
to skip a row in between filling. so there's a nice space between information?

"Peo Sjoblom" wrote:

You don't seem to understand what the formula does, this part

ROWS($A$1:A1)

should change

it's because you want the sheet names to change to

002 (which would be ROWS($A$1:A2))


and so on, it obviously shouldn't return the sheet name but what is in I46

If it doesn't work then it is because you either have spaces in the sheet
names, that you didn't explain in an understandable way what you wanted
(note that all answers are basically the same so I am not the only way
interpreting it this way) or you simply don't understand how to apply it
correctly


--
Regards,

Peo Sjoblom




"MG" wrote in message
...
I've been trying it with no luck.

=INDIRECT("'"&TEXT(ROWS($A$1:A1),"000")&"'!I46")
changes to
=INDIRECT("'"&TEXT(ROWS($A$1:A2),"000")&"'!I46") for the next line and,
=INDIRECT("'"&TEXT(ROWS($A$1:A3),"000")&"'!I46") and so on...its not
changing th sheet names....001, 002, 003, etc.



"Peo Sjoblom" wrote:

Try it! The only thing that changes is the sheet name


--
Regards,

Peo Sjoblom


"MG" wrote in message
...
Peo.

Didn't work. I have numerous tabs "001", "002", "003" etc and on each
one
of
them in column L and Row 46 I have information I want to transfer to
column I
on my main page "Mike". When I fill in the equation down I want the row
and
column part to remain and change the page number each time. Any other
ideas?

"Peo Sjoblom" wrote:

=INDIRECT("'"&TEXT(ROWS($A$1:A1),"000")&"'!I46")


copied down will do what you want


--
Regards,

Peo Sjoblom



"MG" wrote in message
news How can I change the tab but keep the row and column constant when
filling
in
equations?

I'm orgainizing a excel spreadsheet in which I have many
sheets/tabs
in.
I'm trying to put a formula in on my main page where I can get the
data
from
many different sheets while keeping my column and row constant on
each
page.
I'm trying to do this so I can drag this down and it will
automatically
switch pages and while keeping column and roc constant. Example, my
main
tab/sheet is labeled "MIKE" and I want to put information from many
different
tabs/sheets in column "I" on the main page. Right now I've got the
formula
='001'!$l$46...and when I drag it down I want it to pick up sheet
'002'!$l$46
for the next line, '003'!$l$46 for the line after...etc. Is there
anyway I
can do that?? If someone could help me out I'd greatly appreciate.

BJ, Yeah I have it working now...it was a simple typo...now I'm just trying
to figure out how to fill in the equation and have it skip a row in between
data.

"bj" wrote:

may seem like an odd question but do you have toolsoptionscalculations
set to automatic.
if it is set to manual, when you drag the equation down, it will have the
answer from just the first cell in all of the others, until you tell it to
calculate.
the suggestions people have been giving should be working.

"MG" wrote:

Bernie,

I want the information from cells L46 on the other sheets "001", "002",
etc.. to go to column "I" of my first sheet "MIKE"

"Bernie Deitrick" wrote:

=INDIRECT(TEXT(ROW()-ROW($I$4),"000") & "!$L$46")

In your original post, I couldn't tell what your desired cell address was....

HTH,
Bernie
MS Excel MVP


"MG" wrote in message
news Didn't work. I have numerous tabs "001", "002", "003" etc and on each one of
them in column L and Row 46 I have information I want to transfer to column I
on my main page "Mike". When I fill in the equation down I want the row and
column part to remain and change the page number each time. Any other ideas?

"Bernie Deitrick" wrote:

Mike?,

If your sheet tabs are always three digit numbers, you could use, for example, this formula,
entered
into a cell I5:

=INDIRECT(TEXT(ROW()-ROW($I$4),"000") & "!$I$46")

Note that the cell reference (in this case $I$4) needs to be from the row just above the first
instance of the formula.

HTH,
Bernie
MS Excel MVP


"MG" wrote in message
news How can I change the tab but keep the row and column constant when filling in
equations?

I'm orgainizing a excel spreadsheet in which I have many sheets/tabs in.
I'm trying to put a formula in on my main page where I can get the data from
many different sheets while keeping my column and row constant on each page.
I'm trying to do this so I can drag this down and it will automatically
switch pages and while keeping column and roc constant. Example, my main
tab/sheet is labeled "MIKE" and I want to put information from many different
tabs/sheets in column "I" on the main page. Right now I've got the formula
='001'!$l$46...and when I drag it down I want it to pick up sheet '002'!$l$46
for the next line, '003'!$l$46 for the line after...etc. Is there anyway I
can do that?? If someone could help me out I'd greatly appreciate.

may seem like an odd question but do you have toolsoptionscalculations
set to automatic.
if it is set to manual, when you drag the equation down, it will have the
answer from just the first cell in all of the others, until you tell it to
calculate.
the suggestions people have been giving should be working.

"MG" wrote:

Bernie,

I want the information from cells L46 on the other sheets "001", "002",
etc.. to go to column "I" of my first sheet "MIKE"

"Bernie Deitrick" wrote:

=INDIRECT(TEXT(ROW()-ROW($I$4),"000") & "!$L$46")

In your original post, I couldn't tell what your desired cell address was....

HTH,
Bernie
MS Excel MVP


"MG" wrote in message
news
Didn't work. I have numerous tabs "001", "002", "003" etc and on each one of
them in column L and Row 46 I have information I want to transfer to column I
on my main page "Mike". When I fill in the equation down I want the row and
column part to remain and change the page number each time. Any other ideas?

"Bernie Deitrick" wrote:

Mike?,

If your sheet tabs are always three digit numbers, you could use, for example, this formula,
entered
into a cell I5:

=INDIRECT(TEXT(ROW()-ROW($I$4),"000") & "!$I$46")

Note that the cell reference (in this case $I$4) needs to be from the row just above the first
instance of the formula.

HTH,
Bernie
MS Excel MVP


"MG" wrote in message
news How can I change the tab but keep the row and column constant when filling in
equations?

I'm orgainizing a excel spreadsheet in which I have many sheets/tabs in.
I'm trying to put a formula in on my main page where I can get the data from
many different sheets while keeping my column and row constant on each page.
I'm trying to do this so I can drag this down and it will automatically
switch pages and while keeping column and roc constant. Example, my main
tab/sheet is labeled "MIKE" and I want to put information from many different
tabs/sheets in column "I" on the main page. Right now I've got the formula
='001'!$l$46...and when I drag it down I want it to pick up sheet '002'!$l$46
for the next line, '003'!$l$46 for the line after...etc. Is there anyway I
can do that?? If someone could help me out I'd greatly appreciate.