If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ms-Access 2003
Hi everyone,
Wondering if anyone out there has encountered this kind of problem. I am in the process of migrating my client (they were running Windwows NT 4.5 SBS and MS-Access 2000 database) to a brand new server running Windows 2003 SBS with MS-Access 2003. The had an application in MS-Access 2000. After successfully transferring the data and installing MS-Access 2003 on the desktops (the database files are on the server), if I try to double-click the databse to open it, it gives me the following error message: Your Windows Control Panel Date Settings are Currently Unrecognized. Please reset your short Date Format to the U.S. Short Date Format (ie 'mm/dd/yy'). I have set the short date formats to mm/dd/yy both on the server as well as the desktops. However I am still uanble to open the application. Any helps/suggestions will be greatly appreciated. Regards Ravi |
#2
|
|||
|
|||
I don't think that's an Access error message. I think that's something the
developer has built in to these apps. To test this theory, could you try the sample app, Northwind? Can you open it, under the same conditions, without getting this message? -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi everyone, Wondering if anyone out there has encountered this kind of problem. I am in the process of migrating my client (they were running Windwows NT 4.5 SBS and MS-Access 2000 database) to a brand new server running Windows 2003 SBS with MS-Access 2003. The had an application in MS-Access 2000. After successfully transferring the data and installing MS-Access 2003 on the desktops (the database files are on the server), if I try to double-click the databse to open it, it gives me the following error message: Your Windows Control Panel Date Settings are Currently Unrecognized. Please reset your short Date Format to the U.S. Short Date Format (ie 'mm/dd/yy'). I have set the short date formats to mm/dd/yy both on the server as well as the desktops. However I am still uanble to open the application. Any helps/suggestions will be greatly appreciated. Regards Ravi |
#3
|
|||
|
|||
Thanks for your reply Brendan. I wil ltry that.
Is it necessary to load Acess on the server to use their application? The desktops are all XP Pro Sp2 (just fyi). In case your theory is correct - how can I get my client back on their feet with this application? Throw in the the older server and have the users work of it? Regards "Brendan Reynolds" wrote: I don't think that's an Access error message. I think that's something the developer has built in to these apps. To test this theory, could you try the sample app, Northwind? Can you open it, under the same conditions, without getting this message? -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi everyone, Wondering if anyone out there has encountered this kind of problem. I am in the process of migrating my client (they were running Windwows NT 4.5 SBS and MS-Access 2000 database) to a brand new server running Windows 2003 SBS with MS-Access 2003. The had an application in MS-Access 2000. After successfully transferring the data and installing MS-Access 2003 on the desktops (the database files are on the server), if I try to double-click the databse to open it, it gives me the following error message: Your Windows Control Panel Date Settings are Currently Unrecognized. Please reset your short Date Format to the U.S. Short Date Format (ie 'mm/dd/yy'). I have set the short date formats to mm/dd/yy both on the server as well as the desktops. However I am still uanble to open the application. Any helps/suggestions will be greatly appreciated. Regards Ravi |
#4
|
|||
|
|||
There should not usually be any need for Access to be installed *on the
server* no. If my theory is correct, then the solution will depend on how, where, and why the developer did this. Let's establish whether the theory is correct before we go too far down that road, though! :-) -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Thanks for your reply Brendan. I wil ltry that. Is it necessary to load Acess on the server to use their application? The desktops are all XP Pro Sp2 (just fyi). In case your theory is correct - how can I get my client back on their feet with this application? Throw in the the older server and have the users work of it? Regards "Brendan Reynolds" wrote: I don't think that's an Access error message. I think that's something the developer has built in to these apps. To test this theory, could you try the sample app, Northwind? Can you open it, under the same conditions, without getting this message? -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi everyone, Wondering if anyone out there has encountered this kind of problem. I am in the process of migrating my client (they were running Windwows NT 4.5 SBS and MS-Access 2000 database) to a brand new server running Windows 2003 SBS with MS-Access 2003. The had an application in MS-Access 2000. After successfully transferring the data and installing MS-Access 2003 on the desktops (the database files are on the server), if I try to double-click the databse to open it, it gives me the following error message: Your Windows Control Panel Date Settings are Currently Unrecognized. Please reset your short Date Format to the U.S. Short Date Format (ie 'mm/dd/yy'). I have set the short date formats to mm/dd/yy both on the server as well as the desktops. However I am still uanble to open the application. Any helps/suggestions will be greatly appreciated. Regards Ravi |
#5
|
|||
|
|||
Hi Brendan,
Just got off the phone with the client. They are able to open the sample database on their desktops without gettting the error message. What should I do next? Regards "Brendan Reynolds" wrote: There should not usually be any need for Access to be installed *on the server* no. If my theory is correct, then the solution will depend on how, where, and why the developer did this. Let's establish whether the theory is correct before we go too far down that road, though! :-) -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Thanks for your reply Brendan. I wil ltry that. Is it necessary to load Acess on the server to use their application? The desktops are all XP Pro Sp2 (just fyi). In case your theory is correct - how can I get my client back on their feet with this application? Throw in the the older server and have the users work of it? Regards "Brendan Reynolds" wrote: I don't think that's an Access error message. I think that's something the developer has built in to these apps. To test this theory, could you try the sample app, Northwind? Can you open it, under the same conditions, without getting this message? -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi everyone, Wondering if anyone out there has encountered this kind of problem. I am in the process of migrating my client (they were running Windwows NT 4.5 SBS and MS-Access 2000 database) to a brand new server running Windows 2003 SBS with MS-Access 2003. The had an application in MS-Access 2000. After successfully transferring the data and installing MS-Access 2003 on the desktops (the database files are on the server), if I try to double-click the databse to open it, it gives me the following error message: Your Windows Control Panel Date Settings are Currently Unrecognized. Please reset your short Date Format to the U.S. Short Date Format (ie 'mm/dd/yy'). I have set the short date formats to mm/dd/yy both on the server as well as the desktops. However I am still uanble to open the application. Any helps/suggestions will be greatly appreciated. Regards Ravi |
#6
|
|||
|
|||
The safest option would be to do nothing until you talk to the person who
developed the applications. But I'm guessing that person is no longer available? Well then, when an Access application starts, it will look for a macro called AutoExec, and if it finds one, it will run it. If a start-up form or data access page has been defined (Tools, Startup, Display Form/Page) Access will open that form or data access page and run any code in the various event procedures that are fired when the object opens. For example, a form's Open, Load, and Activate events will fire, and any code in the Open, Load and Activate event procedures will run. So those are the places to start looking. If there are both an AutoExec macro and a startup form or data access page, they'll both be executed. Look for an AutoExec macro. Look for the text of the message there. Select Startup from the Tools menu. Does the 'Display Form/Page' combo box say '(none)' or does it display the name of a form or data access page? If the latter, open that form or data access page in design view and look for the message there. Although less likely, it is also possible that the code may be in a function that is called from a query, for example a query that forms the record source of a startup form. I probably don't need to tell you this, but let's err on the side of caution anyway - make sure you have a recent, reliable back up before you change anything. Make one change at a time, and test thoroughly before making any further changes. -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi Brendan, Just got off the phone with the client. They are able to open the sample database on their desktops without gettting the error message. What should I do next? Regards "Brendan Reynolds" wrote: There should not usually be any need for Access to be installed *on the server* no. If my theory is correct, then the solution will depend on how, where, and why the developer did this. Let's establish whether the theory is correct before we go too far down that road, though! :-) -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Thanks for your reply Brendan. I wil ltry that. Is it necessary to load Acess on the server to use their application? The desktops are all XP Pro Sp2 (just fyi). In case your theory is correct - how can I get my client back on their feet with this application? Throw in the the older server and have the users work of it? Regards "Brendan Reynolds" wrote: I don't think that's an Access error message. I think that's something the developer has built in to these apps. To test this theory, could you try the sample app, Northwind? Can you open it, under the same conditions, without getting this message? -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi everyone, Wondering if anyone out there has encountered this kind of problem. I am in the process of migrating my client (they were running Windwows NT 4.5 SBS and MS-Access 2000 database) to a brand new server running Windows 2003 SBS with MS-Access 2003. The had an application in MS-Access 2000. After successfully transferring the data and installing MS-Access 2003 on the desktops (the database files are on the server), if I try to double-click the databse to open it, it gives me the following error message: Your Windows Control Panel Date Settings are Currently Unrecognized. Please reset your short Date Format to the U.S. Short Date Format (ie 'mm/dd/yy'). I have set the short date formats to mm/dd/yy both on the server as well as the desktops. However I am still uanble to open the application. Any helps/suggestions will be greatly appreciated. Regards Ravi |
#7
|
|||
|
|||
Hi Brendan,
Thanks for the suggestions. Yes the developer is no longer available. The process that you are talking about - to check the Tools--Startup etc. is to be carried out on the old machine I presume. So in case I do find anything in the Display Form/Page where should I copy this into. The problem is Brendan I am a systems admin guy with little or no knowledge of programming. On the local desktops (I checked this on mine in my office) when there is no file open the Startup option is dimmed. So when I go to my client site today, I will open the app on the server and see what are the options - if any - defined there. Thanks for all your help. Regards "Brendan Reynolds" wrote: The safest option would be to do nothing until you talk to the person who developed the applications. But I'm guessing that person is no longer available? Well then, when an Access application starts, it will look for a macro called AutoExec, and if it finds one, it will run it. If a start-up form or data access page has been defined (Tools, Startup, Display Form/Page) Access will open that form or data access page and run any code in the various event procedures that are fired when the object opens. For example, a form's Open, Load, and Activate events will fire, and any code in the Open, Load and Activate event procedures will run. So those are the places to start looking. If there are both an AutoExec macro and a startup form or data access page, they'll both be executed. Look for an AutoExec macro. Look for the text of the message there. Select Startup from the Tools menu. Does the 'Display Form/Page' combo box say '(none)' or does it display the name of a form or data access page? If the latter, open that form or data access page in design view and look for the message there. Although less likely, it is also possible that the code may be in a function that is called from a query, for example a query that forms the record source of a startup form. I probably don't need to tell you this, but let's err on the side of caution anyway - make sure you have a recent, reliable back up before you change anything. Make one change at a time, and test thoroughly before making any further changes. -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi Brendan, Just got off the phone with the client. They are able to open the sample database on their desktops without gettting the error message. What should I do next? Regards "Brendan Reynolds" wrote: There should not usually be any need for Access to be installed *on the server* no. If my theory is correct, then the solution will depend on how, where, and why the developer did this. Let's establish whether the theory is correct before we go too far down that road, though! :-) -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Thanks for your reply Brendan. I wil ltry that. Is it necessary to load Acess on the server to use their application? The desktops are all XP Pro Sp2 (just fyi). In case your theory is correct - how can I get my client back on their feet with this application? Throw in the the older server and have the users work of it? Regards "Brendan Reynolds" wrote: I don't think that's an Access error message. I think that's something the developer has built in to these apps. To test this theory, could you try the sample app, Northwind? Can you open it, under the same conditions, without getting this message? -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi everyone, Wondering if anyone out there has encountered this kind of problem. I am in the process of migrating my client (they were running Windwows NT 4.5 SBS and MS-Access 2000 database) to a brand new server running Windows 2003 SBS with MS-Access 2003. The had an application in MS-Access 2000. After successfully transferring the data and installing MS-Access 2003 on the desktops (the database files are on the server), if I try to double-click the databse to open it, it gives me the following error message: Your Windows Control Panel Date Settings are Currently Unrecognized. Please reset your short Date Format to the U.S. Short Date Format (ie 'mm/dd/yy'). I have set the short date formats to mm/dd/yy both on the server as well as the desktops. However I am still uanble to open the application. Any helps/suggestions will be greatly appreciated. Regards Ravi |
#8
|
|||
|
|||
Responses inline ...
-- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi Brendan, Thanks for the suggestions. Yes the developer is no longer available. The process that you are talking about - to check the Tools--Startup etc. is to be carried out on the old machine I presume. It doesn't matter. The problem is, as far as I can tell, in the application. So in case I do find anything in the Display Form/Page where should I copy this into. It's not a question of copying it, it's a question of fixing it. The problem is Brendan I am a systems admin guy with little or no knowledge of programming. This doesn't appear to be a configuration issue. It appears to be a programming issue. You would be well advised, therefore, to ask a programmer to have a look at it. (OK, that's what you're doing here, but I mean at first hand! :-) On the local desktops (I checked this on mine in my office) when there is no file open the Startup option is dimmed. That's correct, the option is disabled until you open a file. So when I go to my client site today, I will open the app on the server and see what are the options - if any - defined there. Let us know what you find, and we may be able to offer further suggestions then. Thanks for all your help. Regards "Brendan Reynolds" wrote: The safest option would be to do nothing until you talk to the person who developed the applications. But I'm guessing that person is no longer available? Well then, when an Access application starts, it will look for a macro called AutoExec, and if it finds one, it will run it. If a start-up form or data access page has been defined (Tools, Startup, Display Form/Page) Access will open that form or data access page and run any code in the various event procedures that are fired when the object opens. For example, a form's Open, Load, and Activate events will fire, and any code in the Open, Load and Activate event procedures will run. So those are the places to start looking. If there are both an AutoExec macro and a startup form or data access page, they'll both be executed. Look for an AutoExec macro. Look for the text of the message there. Select Startup from the Tools menu. Does the 'Display Form/Page' combo box say '(none)' or does it display the name of a form or data access page? If the latter, open that form or data access page in design view and look for the message there. Although less likely, it is also possible that the code may be in a function that is called from a query, for example a query that forms the record source of a startup form. I probably don't need to tell you this, but let's err on the side of caution anyway - make sure you have a recent, reliable back up before you change anything. Make one change at a time, and test thoroughly before making any further changes. -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi Brendan, Just got off the phone with the client. They are able to open the sample database on their desktops without gettting the error message. What should I do next? Regards "Brendan Reynolds" wrote: There should not usually be any need for Access to be installed *on the server* no. If my theory is correct, then the solution will depend on how, where, and why the developer did this. Let's establish whether the theory is correct before we go too far down that road, though! :-) -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Thanks for your reply Brendan. I wil ltry that. Is it necessary to load Acess on the server to use their application? The desktops are all XP Pro Sp2 (just fyi). In case your theory is correct - how can I get my client back on their feet with this application? Throw in the the older server and have the users work of it? Regards "Brendan Reynolds" wrote: I don't think that's an Access error message. I think that's something the developer has built in to these apps. To test this theory, could you try the sample app, Northwind? Can you open it, under the same conditions, without getting this message? -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi everyone, Wondering if anyone out there has encountered this kind of problem. I am in the process of migrating my client (they were running Windwows NT 4.5 SBS and MS-Access 2000 database) to a brand new server running Windows 2003 SBS with MS-Access 2003. The had an application in MS-Access 2000. After successfully transferring the data and installing MS-Access 2003 on the desktops (the database files are on the server), if I try to double-click the databse to open it, it gives me the following error message: Your Windows Control Panel Date Settings are Currently Unrecognized. Please reset your short Date Format to the U.S. Short Date Format (ie 'mm/dd/yy'). I have set the short date formats to mm/dd/yy both on the server as well as the desktops. However I am still uanble to open the application. Any helps/suggestions will be greatly appreciated. Regards Ravi |
#9
|
|||
|
|||
Hi Brendan,
I am at hte client site right now. I tried to go through what you had suggested. However the option under Display Form/Page is set to none. I even tried to map a drive on the user's new desktop to the old server and run the application. I got the same error message. I copied the mdb file to my machine in the office and still the problem persists. Is there any other file that needs to be checked. The mdb file is 3 Mb but there is a name_be.mdb file that is more than 230 MB. Thanks and regards "Brendan Reynolds" wrote: Responses inline ... -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi Brendan, Thanks for the suggestions. Yes the developer is no longer available. The process that you are talking about - to check the Tools--Startup etc. is to be carried out on the old machine I presume. It doesn't matter. The problem is, as far as I can tell, in the application. So in case I do find anything in the Display Form/Page where should I copy this into. It's not a question of copying it, it's a question of fixing it. The problem is Brendan I am a systems admin guy with little or no knowledge of programming. This doesn't appear to be a configuration issue. It appears to be a programming issue. You would be well advised, therefore, to ask a programmer to have a look at it. (OK, that's what you're doing here, but I mean at first hand! :-) On the local desktops (I checked this on mine in my office) when there is no file open the Startup option is dimmed. That's correct, the option is disabled until you open a file. So when I go to my client site today, I will open the app on the server and see what are the options - if any - defined there. Let us know what you find, and we may be able to offer further suggestions then. Thanks for all your help. Regards "Brendan Reynolds" wrote: The safest option would be to do nothing until you talk to the person who developed the applications. But I'm guessing that person is no longer available? Well then, when an Access application starts, it will look for a macro called AutoExec, and if it finds one, it will run it. If a start-up form or data access page has been defined (Tools, Startup, Display Form/Page) Access will open that form or data access page and run any code in the various event procedures that are fired when the object opens. For example, a form's Open, Load, and Activate events will fire, and any code in the Open, Load and Activate event procedures will run. So those are the places to start looking. If there are both an AutoExec macro and a startup form or data access page, they'll both be executed. Look for an AutoExec macro. Look for the text of the message there. Select Startup from the Tools menu. Does the 'Display Form/Page' combo box say '(none)' or does it display the name of a form or data access page? If the latter, open that form or data access page in design view and look for the message there. Although less likely, it is also possible that the code may be in a function that is called from a query, for example a query that forms the record source of a startup form. I probably don't need to tell you this, but let's err on the side of caution anyway - make sure you have a recent, reliable back up before you change anything. Make one change at a time, and test thoroughly before making any further changes. -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi Brendan, Just got off the phone with the client. They are able to open the sample database on their desktops without gettting the error message. What should I do next? Regards "Brendan Reynolds" wrote: There should not usually be any need for Access to be installed *on the server* no. If my theory is correct, then the solution will depend on how, where, and why the developer did this. Let's establish whether the theory is correct before we go too far down that road, though! :-) -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Thanks for your reply Brendan. I wil ltry that. Is it necessary to load Acess on the server to use their application? The desktops are all XP Pro Sp2 (just fyi). In case your theory is correct - how can I get my client back on their feet with this application? Throw in the the older server and have the users work of it? Regards "Brendan Reynolds" wrote: I don't think that's an Access error message. I think that's something the developer has built in to these apps. To test this theory, could you try the sample app, Northwind? Can you open it, under the same conditions, without getting this message? -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi everyone, Wondering if anyone out there has encountered this kind of problem. I am in the process of migrating my client (they were running Windwows NT 4.5 SBS and MS-Access 2000 database) to a brand new server running Windows 2003 SBS with MS-Access 2003. The had an application in MS-Access 2000. After successfully transferring the data and installing MS-Access 2003 on the desktops (the database files are on the server), if I try to double-click the databse to open it, it gives me the following error message: Your Windows Control Panel Date Settings are Currently Unrecognized. Please reset your short Date Format to the U.S. Short Date Format (ie 'mm/dd/yy'). I have set the short date formats to mm/dd/yy both on the server as well as the desktops. However I am still uanble to open the application. Any helps/suggestions will be greatly appreciated. Regards Ravi |
#10
|
|||
|
|||
Is there a macro named AutoExec?
The _be file will be the 'back-end' data file, the problem is unlikely to be there. -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi Brendan, I am at hte client site right now. I tried to go through what you had suggested. However the option under Display Form/Page is set to none. I even tried to map a drive on the user's new desktop to the old server and run the application. I got the same error message. I copied the mdb file to my machine in the office and still the problem persists. Is there any other file that needs to be checked. The mdb file is 3 Mb but there is a name_be.mdb file that is more than 230 MB. Thanks and regards "Brendan Reynolds" wrote: Responses inline ... -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi Brendan, Thanks for the suggestions. Yes the developer is no longer available. The process that you are talking about - to check the Tools--Startup etc. is to be carried out on the old machine I presume. It doesn't matter. The problem is, as far as I can tell, in the application. So in case I do find anything in the Display Form/Page where should I copy this into. It's not a question of copying it, it's a question of fixing it. The problem is Brendan I am a systems admin guy with little or no knowledge of programming. This doesn't appear to be a configuration issue. It appears to be a programming issue. You would be well advised, therefore, to ask a programmer to have a look at it. (OK, that's what you're doing here, but I mean at first hand! :-) On the local desktops (I checked this on mine in my office) when there is no file open the Startup option is dimmed. That's correct, the option is disabled until you open a file. So when I go to my client site today, I will open the app on the server and see what are the options - if any - defined there. Let us know what you find, and we may be able to offer further suggestions then. Thanks for all your help. Regards "Brendan Reynolds" wrote: The safest option would be to do nothing until you talk to the person who developed the applications. But I'm guessing that person is no longer available? Well then, when an Access application starts, it will look for a macro called AutoExec, and if it finds one, it will run it. If a start-up form or data access page has been defined (Tools, Startup, Display Form/Page) Access will open that form or data access page and run any code in the various event procedures that are fired when the object opens. For example, a form's Open, Load, and Activate events will fire, and any code in the Open, Load and Activate event procedures will run. So those are the places to start looking. If there are both an AutoExec macro and a startup form or data access page, they'll both be executed. Look for an AutoExec macro. Look for the text of the message there. Select Startup from the Tools menu. Does the 'Display Form/Page' combo box say '(none)' or does it display the name of a form or data access page? If the latter, open that form or data access page in design view and look for the message there. Although less likely, it is also possible that the code may be in a function that is called from a query, for example a query that forms the record source of a startup form. I probably don't need to tell you this, but let's err on the side of caution anyway - make sure you have a recent, reliable back up before you change anything. Make one change at a time, and test thoroughly before making any further changes. -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi Brendan, Just got off the phone with the client. They are able to open the sample database on their desktops without gettting the error message. What should I do next? Regards "Brendan Reynolds" wrote: There should not usually be any need for Access to be installed *on the server* no. If my theory is correct, then the solution will depend on how, where, and why the developer did this. Let's establish whether the theory is correct before we go too far down that road, though! :-) -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Thanks for your reply Brendan. I wil ltry that. Is it necessary to load Acess on the server to use their application? The desktops are all XP Pro Sp2 (just fyi). In case your theory is correct - how can I get my client back on their feet with this application? Throw in the the older server and have the users work of it? Regards "Brendan Reynolds" wrote: I don't think that's an Access error message. I think that's something the developer has built in to these apps. To test this theory, could you try the sample app, Northwind? Can you open it, under the same conditions, without getting this message? -- Brendan Reynolds (MVP) http://brenreyn.blogspot.com The spammers and script-kiddies have succeeded in making it impossible for me to use a real e-mail address in public newsgroups. E-mail replies to this post will be deleted without being read. Any e-mail claiming to be from brenreyn at indigo dot ie that is not digitally signed by me with a GlobalSign digital certificate is a forgery and should be deleted without being read. Follow-up questions should in general be posted to the newsgroup, but if you have a good reason to send me e-mail, you'll find a useable e-mail address at the URL above. "RC" wrote in message ... Hi everyone, Wondering if anyone out there has encountered this kind of problem. I am in the process of migrating my client (they were running Windwows NT 4.5 SBS and MS-Access 2000 database) to a brand new server running Windows 2003 SBS with MS-Access 2003. The had an application in MS-Access 2000. After successfully transferring the data and installing MS-Access 2003 on the desktops (the database files are on the server), if I try to double-click the databse to open it, it gives me the following error message: Your Windows Control Panel Date Settings are Currently Unrecognized. Please reset your short Date Format to the U.S. Short Date Format (ie 'mm/dd/yy'). I have set the short date formats to mm/dd/yy both on the server as well as the desktops. However I am still uanble to open the application. Any helps/suggestions will be greatly appreciated. Regards Ravi |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
access 2003 can't open an access 2000 mdb | Sean | General Discussion | 7 | August 13th, 2004 06:41 AM |
TIF images in Access 2003 | Chris | Using Forms | 5 | June 24th, 2004 04:41 AM |
Access 2003 | RK | General Discussion | 12 | June 14th, 2004 10:16 AM |
Access 97 to Access 2003 | Jim Sloan | General Discussion | 3 | June 10th, 2004 10:32 PM |
Productkey problem when installing office 2003 on network | Stefan Schreurs | Setup, Installing & Configuration | 1 | June 1st, 2004 11:16 PM |