A Microsoft Office (Excel, Word) forum. OfficeFrustration

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » OfficeFrustration forum » Microsoft Word » Tables
Site Map Home Register Authors List Search Today's Posts Mark Forums Read  

How do I link graphics and tables?



 
 
Thread Tools Display Modes
  #1  
Old February 27th, 2006, 08:24 PM posted to microsoft.public.word.tables
external usenet poster
 
Posts: n/a
Default How do I link graphics and tables?

I need to insert many charts and graphics into my dissertation, which is also
overloaded with footnotes. In order to avoid overloading the doc,
Suzanne S. Barnhill once advised me to:

3. Link graphics as much as possible and don't display them except when
absolutely necessary. On the View tab of Tools | Options, check the box for
"Picture placeholders" and clear the box for "Drawings." This will suppress
the display of all graphics.

Can I do the same with charts and tables?

  #2  
Old February 27th, 2006, 09:06 PM posted to microsoft.public.word.tables
external usenet poster
 
Posts: n/a
Default How do I link graphics and tables?

Charts *are* graphics (that is, if you're talking about the charts created
using Microsoft Graph) and will be governed by the View Options settings.
Tables do add complexity to the document, but they usually don't cause a
problem unless they get very long. Especially to be avoided are long
single-row tables.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Jauchart" wrote in message
...
I need to insert many charts and graphics into my dissertation, which is

also
overloaded with footnotes. In order to avoid overloading the doc,
Suzanne S. Barnhill once advised me to:

3. Link graphics as much as possible and don't display them except when
absolutely necessary. On the View tab of Tools | Options, check the box

for
"Picture placeholders" and clear the box for "Drawings." This will

suppress
the display of all graphics.

Can I do the same with charts and tables?


  #3  
Old February 28th, 2006, 01:03 AM posted to microsoft.public.word.tables
external usenet poster
 
Posts: n/a
Default How do I link graphics and tables?

Ok, but my question is, how do I link them, as you advised.

"Suzanne S. Barnhill" wrote:

Charts *are* graphics (that is, if you're talking about the charts created
using Microsoft Graph) and will be governed by the View Options settings.
Tables do add complexity to the document, but they usually don't cause a
problem unless they get very long. Especially to be avoided are long
single-row tables.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Jauchart" wrote in message
...
I need to insert many charts and graphics into my dissertation, which is

also
overloaded with footnotes. In order to avoid overloading the doc,
Suzanne S. Barnhill once advised me to:

3. Link graphics as much as possible and don't display them except when
absolutely necessary. On the View tab of Tools | Options, check the box

for
"Picture placeholders" and clear the box for "Drawings." This will

suppress
the display of all graphics.

Can I do the same with charts and tables?



  #4  
Old February 28th, 2006, 01:08 AM posted to microsoft.public.word.tables
external usenet poster
 
Posts: n/a
Default How do I link graphics and tables?

There's no way to link tables. And I don't think you can link charts,
either, unless they're created in Excel.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Jauchart" wrote in message
news
Ok, but my question is, how do I link them, as you advised.

"Suzanne S. Barnhill" wrote:

Charts *are* graphics (that is, if you're talking about the charts

created
using Microsoft Graph) and will be governed by the View Options

settings.
Tables do add complexity to the document, but they usually don't cause a
problem unless they get very long. Especially to be avoided are long
single-row tables.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Jauchart" wrote in message
...
I need to insert many charts and graphics into my dissertation, which

is
also
overloaded with footnotes. In order to avoid overloading the doc,
Suzanne S. Barnhill once advised me to:

3. Link graphics as much as possible and don't display them except

when
absolutely necessary. On the View tab of Tools | Options, check the

box
for
"Picture placeholders" and clear the box for "Drawings." This will

suppress
the display of all graphics.

Can I do the same with charts and tables?




  #5  
Old February 28th, 2006, 01:31 AM posted to microsoft.public.word.tables
external usenet poster
 
Posts: n/a
Default How do I link graphics and tables?

OK, then how do I link the graphics?
The charts were created in Excel, then imported into a separate Word
document. Can I link them from either source?
Robert


"Suzanne S. Barnhill" wrote:

There's no way to link tables. And I don't think you can link charts,
either, unless they're created in Excel.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Jauchart" wrote in message
news
Ok, but my question is, how do I link them, as you advised.

"Suzanne S. Barnhill" wrote:

Charts *are* graphics (that is, if you're talking about the charts

created
using Microsoft Graph) and will be governed by the View Options

settings.
Tables do add complexity to the document, but they usually don't cause a
problem unless they get very long. Especially to be avoided are long
single-row tables.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Jauchart" wrote in message
...
I need to insert many charts and graphics into my dissertation, which

is
also
overloaded with footnotes. In order to avoid overloading the doc,
Suzanne S. Barnhill once advised me to:

3. Link graphics as much as possible and don't display them except

when
absolutely necessary. On the View tab of Tools | Options, check the

box
for
"Picture placeholders" and clear the box for "Drawings." This will
suppress
the display of all graphics.

Can I do the same with charts and tables?





  #6  
Old February 28th, 2006, 02:40 AM posted to microsoft.public.word.tables
external usenet poster
 
Posts: n/a
Default How do I link graphics and tables?

I'm not really sure about this. You can paste them from Excel using Paste
Link, but I'm not sure whether that's a pure link or a link+embed technique.
If you bookmark them in the other Word document, you can certainly use an
IncludeText field to link to them there. In fact, you should be able to link
to them in Excel using IncludeText (in this case, a named range functions as
a bookmark).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Jauchart" wrote in message
...
OK, then how do I link the graphics?
The charts were created in Excel, then imported into a separate Word
document. Can I link them from either source?
Robert


"Suzanne S. Barnhill" wrote:

There's no way to link tables. And I don't think you can link charts,
either, unless they're created in Excel.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Jauchart" wrote in message
news
Ok, but my question is, how do I link them, as you advised.

"Suzanne S. Barnhill" wrote:

Charts *are* graphics (that is, if you're talking about the charts

created
using Microsoft Graph) and will be governed by the View Options

settings.
Tables do add complexity to the document, but they usually don't

cause a
problem unless they get very long. Especially to be avoided are long
single-row tables.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Jauchart" wrote in message
...
I need to insert many charts and graphics into my dissertation,

which
is
also
overloaded with footnotes. In order to avoid overloading the doc,
Suzanne S. Barnhill once advised me to:

3. Link graphics as much as possible and don't display them except

when
absolutely necessary. On the View tab of Tools | Options, check

the
box
for
"Picture placeholders" and clear the box for "Drawings." This will
suppress
the display of all graphics.

Can I do the same with charts and tables?






  #7  
Old February 28th, 2006, 02:53 AM posted to microsoft.public.word.tables
external usenet poster
 
Posts: n/a
Default How do I link graphics and tables?

And how do I link the graphics?


"Suzanne S. Barnhill" wrote:

I'm not really sure about this. You can paste them from Excel using Paste
Link, but I'm not sure whether that's a pure link or a link+embed technique.
If you bookmark them in the other Word document, you can certainly use an
IncludeText field to link to them there. In fact, you should be able to link
to them in Excel using IncludeText (in this case, a named range functions as
a bookmark).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Jauchart" wrote in message
...
OK, then how do I link the graphics?
The charts were created in Excel, then imported into a separate Word
document. Can I link them from either source?
Robert


"Suzanne S. Barnhill" wrote:

There's no way to link tables. And I don't think you can link charts,
either, unless they're created in Excel.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Jauchart" wrote in message
news Ok, but my question is, how do I link them, as you advised.

"Suzanne S. Barnhill" wrote:

Charts *are* graphics (that is, if you're talking about the charts
created
using Microsoft Graph) and will be governed by the View Options
settings.
Tables do add complexity to the document, but they usually don't

cause a
problem unless they get very long. Especially to be avoided are long
single-row tables.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Jauchart" wrote in message
...
I need to insert many charts and graphics into my dissertation,

which
is
also
overloaded with footnotes. In order to avoid overloading the doc,
Suzanne S. Barnhill once advised me to:

3. Link graphics as much as possible and don't display them except
when
absolutely necessary. On the View tab of Tools | Options, check

the
box
for
"Picture placeholders" and clear the box for "Drawings." This will
suppress
the display of all graphics.

Can I do the same with charts and tables?







  #8  
Old February 28th, 2006, 04:11 AM posted to microsoft.public.word.tables
external usenet poster
 
Posts: n/a
Default How do I link graphics and tables?

When you insert them, in the Insert | Picture | From File dialog, click the
arrow beside Insert and choose Link to File. For drawings created within
Word there is no linking method except again, possibly, the IncludeText
field. But it's possible to get too carried away with linking. Keep in mind
that linking makes the file less portable.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Jauchart" wrote in message
...
And how do I link the graphics?


"Suzanne S. Barnhill" wrote:

I'm not really sure about this. You can paste them from Excel using

Paste
Link, but I'm not sure whether that's a pure link or a link+embed

technique.
If you bookmark them in the other Word document, you can certainly use

an
IncludeText field to link to them there. In fact, you should be able to

link
to them in Excel using IncludeText (in this case, a named range

functions as
a bookmark).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Jauchart" wrote in message
...
OK, then how do I link the graphics?
The charts were created in Excel, then imported into a separate Word
document. Can I link them from either source?
Robert


"Suzanne S. Barnhill" wrote:

There's no way to link tables. And I don't think you can link

charts,
either, unless they're created in Excel.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Jauchart" wrote in message
news Ok, but my question is, how do I link them, as you advised.

"Suzanne S. Barnhill" wrote:

Charts *are* graphics (that is, if you're talking about the

charts
created
using Microsoft Graph) and will be governed by the View Options
settings.
Tables do add complexity to the document, but they usually don't

cause a
problem unless they get very long. Especially to be avoided are

long
single-row tables.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Jauchart" wrote in message
...
I need to insert many charts and graphics into my

dissertation,
which
is
also
overloaded with footnotes. In order to avoid overloading the

doc,
Suzanne S. Barnhill once advised me to:

3. Link graphics as much as possible and don't display them

except
when
absolutely necessary. On the View tab of Tools | Options,

check
the
box
for
"Picture placeholders" and clear the box for "Drawings." This

will
suppress
the display of all graphics.

Can I do the same with charts and tables?








 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
forms for tables set up as "one to one" Babe in the Woods New Users 7 February 23rd, 2006 09:45 AM
Best way to add graphics and tables in a document [email protected] Formatting Long Documents 4 February 4th, 2006 03:30 PM
training document template: columns? tables? trouble! sb Page Layout 4 October 4th, 2005 09:30 PM
invisible graphics and tables Bob Powers Publisher 1 November 6th, 2004 05:41 PM
Excel Tables in Word bmccormi General Discussion 6 August 10th, 2004 04:15 PM


All times are GMT +1. The time now is 01:42 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 OfficeFrustration.
The comments are property of their posters.