If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#31
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
No-one here works for or speaks for Microsoft.
I provide Word support for users both in these forums and on my web site at my own expense and in my own time. Neither do I have much time for anonymous whingers, who jump into someone elses thread to make their own petty points, or for Word Perfect users who come here to report how hard done to they are, by having to work for an organisation that makes them use a different product. If you have an issue with your employers take it up with them. If you want free user peer group support you take on the rough and tumble of the user forums. If you want manufacturer's help desk support then I am sure Microsoft would be happy to take your money. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org COSMO wrote: IF YOU DON'T LIKE PROVIDING COURTEOUS SERVICE TO THE NUMEROUS QUESTIONS ASKED, LOOK FOR ANOTHER JOB. If my business found out an employee was treating a customer in the inane fashion you did by telling them to use another product, that employee would be terminated for cause, and immediately escorted out by security forces. Having a bad day? Don't come to work and take it out on the valued customer that used/purchased your MSloth products. Indeed, have you no shame? Cosmo "Graham Mayor" wrote: It is nothing to do with single spacing, but with inter-paragarph spacing. The default setting for normal style (used for labels) is to have 12 points of space after each paragraph and it is that that appears to show the double spacing on the labels (the address lines each being a paragraph). It seems odd that Microsoft swapped Normal style and the No spaced stype while leaving normal as the default style for labels. They would have been better creating a normal spaced style and left normal unspaced as in previous versions. You can make these changes if you wish as long as you remember to save them in normal.dot. If you don't like Microsoft products there are alternatives you can buy. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#32
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Continued responses such as these will paint you as nothing more than a
troll and we don't feed trolls around here. Not even those who find themselves with a problem and come crawling back seeking help. Once a troll always a troll. Now, if you aren't a troll and have come here seeking help then my suggestion to you is to stop behaving like one. We aren't a bunch of Microsoft cheerleaders. We're nothing more than users, just like you, who are here to learn more about the applications we are using, either by personal preference or forced usage. At the same time we don't want a bunch of negative bs being tossed around. This is a friendly environment and we strive to keep it that way. So it's your choice, change the attitude and you'll be welcome here. There a several around here that are or were in your shoes so I'm sure you'll fit in. :-) Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton "COSMO" wrote in message ... Good response re MSloth thinking we should follow their piper. Unfortunately, I am stuck in a campus environment using MSloth 2007, and I am a true died-in-the-wool user of Corel WordPerfect---have been since before they were known as WP. cosmo "Icemaiden" wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#33
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
"Beth Melton" wrote: Now, the note wasn't offending. ;-) This is one of those areas I fought hard for during the beta. Originally, the new default spacing infiltrated *everything*. Labels, envelopes, you name it. Thankfully Microsoft did listen to the feedback and changed the behaviors. I suspect there were a few areas that were missed (I'm still wondering what happened to labels when you use mail merge...) but as a whole I'm happy with the changes they made. I suspect that's why I wanted to see the corrections made to your page since it is a 'win' for user feedback. :-) Also, as for changing everything back to the way it was, instead of modifying styles and such, you can simply switch to the Word 2003 style set. This is available under Change Styles/Style Sets. After you select "Word 2003" in the Style Set list, if you want to use it as your default then click the Change Styles button again and then click "Set as Default". Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I have now re-written the offending paragraph - http://www.gmayor.com/merge_labels_w...2007.htm#Note: which should now cover what is supposed to happen and what I see happening -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Graham Mayor wrote: This is not the behaviour I see here - at least not consistently Here the default setting for the Normal paragraph style is to have 10 points of space after, and multiple line spacing is set to 1.15. There is another style in the default set called 'No Spacing' which is what I would have expected 'Normal. to be. Normal style is used by default in tables - and this isn't a beta copy of Word (I skipped the beta process entirely) and is tested for the purpose of clarification in its safe mode - so tables have added space. However there is some additional behaviour going on here, which seems a tad hit and miss. Sometimes when you insert and address into the labels tool window, the address is posted into the label (new document) with added space and then it is reformatted to remove the extra padding. Other times it doesn't do that and the spacing remains. It all seems a tad flaky to me. I will however return to that disputed paragraph and make some change based on what I find. Removing the space from the normal style and creating a new style with the spacing (I renamed the No Spacing style after I added the spacing to it) removes the anomaly, and as this was how Word was setup through its recent versions, I fail to see why they changed it to complicate matters. Beth Melton wrote: I pointed this out to you in my previous reply regarding the behavior of lables in Word 2007 but I'll mention it again. ;-) On your page you have this note: "Microsoft appears to have retained the default use of the 'normal' paragraph style to format tables; however, in Word 2007, the normal paragraph style has added spacing. This will result in extra spacing between the lines of the addresses on the labels when created using the label tool..." Technically this statement is incorrect. By default, Word 2007 does not add any additional spacing, not between paragraphs or line spacing, on labels you create using the Labels command on the Mailings tab. Now, if *you* modify your Normal style and add extra spacing then in this scenario that spacing will also be added to the labels. I suspect this is why you are seeing this behavior. Note that one of the beta versions did include the additional space but due to feedback they received this behavior was changed in RTM. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I don't intentionally post misleading information on my web site, so OK, I'll bite. What is wrong with the information as it now stands? I have checked my comments using Word 2007 in its safe mode, but I will concede that it is possible to get so close to a project that you miss things or misinterpret things that others see. I have added a paragraph at the start of the page as it would appear that I am advocating sticking to ancient ways, whereas my intention was to show that they were still available. I have also added a hyperlink to allow readers to jump over the following section. I am not using nor ever have used the beta version? -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Incidentally, there is still some misinformation on your page regarding Word 2007 labels. Do you happen to still be using a beta version? Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I made the changes to my web site yesterday, which you may find of interest - All your users would have to do is save the formatted merge source document and attach the data file as required (assuming the same field names) http://www.gmayor.com/merge_labels_with_word_2007.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#34
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
"Icemaiden" wrote: I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
Thread Tools | |
Display Modes | |
|
|