If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
publisher cannot open file from a different version
A numpty? Never heard that one before.
After the files are copied onto your new computer, open My Computer and located those files - but don't open them. Right click on the file name. Select Properties. Look at the bottom of that dialog box and if Read-Only is checked, clear it. Then try opening the file. If that doesn't work, send a file to jl dot paules at gmail dot com. (It's spelled out so I don't get blasted with spam.) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Hi JoAnn thx for getting back please be patient with me as im not very tech minded on PC's but not a total numpty, from the start, i have a new PC and from my old PC i was using Publisher 2000, i tranfered all my files over to my memory stick, then from my CD i downloaded office 2000 which has the same Publisher that i was using on my old PC, everything else works on my new PC ie Excel, windows etc but not Publisher. I have checked all the files on the stick and all of them have a tick by Archieve, i have also disabled AV and transfered all my have over to my hard drive and to no avail dont mind emailing you a file at all, what is your address please.. "JoAnn Paules [MVP]" wrote: Oh, just never heard of the terminology. I need to recap. You got a new computer. Both old and new computer have Publisher. You copied Pub files from old computer to storage device, you copied those files back onto the new computer. They won't open. You tried disabling AV. Still no success. A few questions: 1. Which version of Publisher is on the old computer? 2. Which version of Publisher is on the new computer? (Please don't say Version 6 - I deal with things like Pub 98, Pub 2000, etc. Sorry) 3. Have you checked the files on the new computer (within Windows Explorer) and made sure they are not read-only? 4. Is there any chance you can email me one of the questionable files? 5. I have to ask this question - Any chance you are getting Home Publishing and Publisher mixed up? It happens every now and then and sometimes you need to eliminate that fact. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... a memory stick. Mary did as you requested but still no joy, im running version 6 and the Archieve box is ticked "JoAnn Paules [MVP]" wrote: What's a POD? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Mary, thx for getting back to me, just tried your request and it didnt work i also checked the files and they are set as Archieve on the POD M "Mary Sauer" wrote: Copy the files over to your hard drive, try to open them again. The Publisher files maybe read only if they are stored on removable media. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi, just bought a new PC from Dell and trying to open several Publisher files from my old PC which i saved onto my POD, but the following msg comes up: publisher cannot open file from a different version, I dont have Norton (I have Mcafee) I have tried to save it as a duifferent Program with no success, the version i am using for publisher is version 6, please can someone help as and please use the idiots guide with me as im not that technically minded as you pro's, Cheers Maurizio |
#12
|
|||
|
|||
publisher cannot open file from a different version
when i open a file a blank page appears with the following message: publisher
cannot open file from a different version, when i right click the file and go into properties it shows the archieve box as ticked But, when i go through programmes to open up a totally new page from start its works as normal im using Windows XP "Mary Sauer" wrote: The only way you will see "archiving" is by clicking the advanced button in the properties dialogue. Are you using Windows XP? The "read only" is an attribute. What happens if you double-click a file? -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi JoAnn thx for getting back please be patient with me as im not very tech minded on PC's but not a total numpty, from the start, i have a new PC and from my old PC i was using Publisher 2000, i tranfered all my files over to my memory stick, then from my CD i downloaded office 2000 which has the same Publisher that i was using on my old PC, everything else works on my new PC ie Excel, windows etc but not Publisher. I have checked all the files on the stick and all of them have a tick by Archieve, i have also disabled AV and transfered all my have over to my hard drive and to no avail dont mind emailing you a file at all, what is your address please.. "JoAnn Paules [MVP]" wrote: Oh, just never heard of the terminology. I need to recap. You got a new computer. Both old and new computer have Publisher. You copied Pub files from old computer to storage device, you copied those files back onto the new computer. They won't open. You tried disabling AV. Still no success. A few questions: 1. Which version of Publisher is on the old computer? 2. Which version of Publisher is on the new computer? (Please don't say Version 6 - I deal with things like Pub 98, Pub 2000, etc. Sorry) 3. Have you checked the files on the new computer (within Windows Explorer) and made sure they are not read-only? 4. Is there any chance you can email me one of the questionable files? 5. I have to ask this question - Any chance you are getting Home Publishing and Publisher mixed up? It happens every now and then and sometimes you need to eliminate that fact. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... a memory stick. Mary did as you requested but still no joy, im running version 6 and the Archieve box is ticked "JoAnn Paules [MVP]" wrote: What's a POD? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Mary, thx for getting back to me, just tried your request and it didnt work i also checked the files and they are set as Archieve on the POD M "Mary Sauer" wrote: Copy the files over to your hard drive, try to open them again. The Publisher files maybe read only if they are stored on removable media. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi, just bought a new PC from Dell and trying to open several Publisher files from my old PC which i saved onto my POD, but the following msg comes up: publisher cannot open file from a different version, I dont have Norton (I have Mcafee) I have tried to save it as a duifferent Program with no success, the version i am using for publisher is version 6, please can someone help as and please use the idiots guide with me as im not that technically minded as you pro's, Cheers Maurizio |
#13
|
|||
|
|||
publisher cannot open file from a different version
ok i'll send you an email asap, Read Only and Hidden were both clear.
Numpty is the word of the day "JoAnn Paules [MVP]" wrote: A numpty? Never heard that one before. After the files are copied onto your new computer, open My Computer and located those files - but don't open them. Right click on the file name. Select Properties. Look at the bottom of that dialog box and if Read-Only is checked, clear it. Then try opening the file. If that doesn't work, send a file to jl dot paules at gmail dot com. (It's spelled out so I don't get blasted with spam.) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Hi JoAnn thx for getting back please be patient with me as im not very tech minded on PC's but not a total numpty, from the start, i have a new PC and from my old PC i was using Publisher 2000, i tranfered all my files over to my memory stick, then from my CD i downloaded office 2000 which has the same Publisher that i was using on my old PC, everything else works on my new PC ie Excel, windows etc but not Publisher. I have checked all the files on the stick and all of them have a tick by Archieve, i have also disabled AV and transfered all my have over to my hard drive and to no avail dont mind emailing you a file at all, what is your address please.. "JoAnn Paules [MVP]" wrote: Oh, just never heard of the terminology. I need to recap. You got a new computer. Both old and new computer have Publisher. You copied Pub files from old computer to storage device, you copied those files back onto the new computer. They won't open. You tried disabling AV. Still no success. A few questions: 1. Which version of Publisher is on the old computer? 2. Which version of Publisher is on the new computer? (Please don't say Version 6 - I deal with things like Pub 98, Pub 2000, etc. Sorry) 3. Have you checked the files on the new computer (within Windows Explorer) and made sure they are not read-only? 4. Is there any chance you can email me one of the questionable files? 5. I have to ask this question - Any chance you are getting Home Publishing and Publisher mixed up? It happens every now and then and sometimes you need to eliminate that fact. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... a memory stick. Mary did as you requested but still no joy, im running version 6 and the Archieve box is ticked "JoAnn Paules [MVP]" wrote: What's a POD? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Mary, thx for getting back to me, just tried your request and it didnt work i also checked the files and they are set as Archieve on the POD M "Mary Sauer" wrote: Copy the files over to your hard drive, try to open them again. The Publisher files maybe read only if they are stored on removable media. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi, just bought a new PC from Dell and trying to open several Publisher files from my old PC which i saved onto my POD, but the following msg comes up: publisher cannot open file from a different version, I dont have Norton (I have Mcafee) I have tried to save it as a duifferent Program with no success, the version i am using for publisher is version 6, please can someone help as and please use the idiots guide with me as im not that technically minded as you pro's, Cheers Maurizio |
#14
|
|||
|
|||
publisher cannot open file from a different version
I was able to open the file with Pub 2003 without a problem. Then I
remembered you said you used Pub 2000. I tried opening it with Pub 2000. Guess what - couldn't open it. Tried with Pub 2002 - opened just fine. Okay............if you have Publisher 2000, who created the file for you? :-) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... ok i'll send you an email asap, Read Only and Hidden were both clear. Numpty is the word of the day "JoAnn Paules [MVP]" wrote: A numpty? Never heard that one before. After the files are copied onto your new computer, open My Computer and located those files - but don't open them. Right click on the file name. Select Properties. Look at the bottom of that dialog box and if Read-Only is checked, clear it. Then try opening the file. If that doesn't work, send a file to jl dot paules at gmail dot com. (It's spelled out so I don't get blasted with spam.) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Hi JoAnn thx for getting back please be patient with me as im not very tech minded on PC's but not a total numpty, from the start, i have a new PC and from my old PC i was using Publisher 2000, i tranfered all my files over to my memory stick, then from my CD i downloaded office 2000 which has the same Publisher that i was using on my old PC, everything else works on my new PC ie Excel, windows etc but not Publisher. I have checked all the files on the stick and all of them have a tick by Archieve, i have also disabled AV and transfered all my have over to my hard drive and to no avail dont mind emailing you a file at all, what is your address please.. "JoAnn Paules [MVP]" wrote: Oh, just never heard of the terminology. I need to recap. You got a new computer. Both old and new computer have Publisher. You copied Pub files from old computer to storage device, you copied those files back onto the new computer. They won't open. You tried disabling AV. Still no success. A few questions: 1. Which version of Publisher is on the old computer? 2. Which version of Publisher is on the new computer? (Please don't say Version 6 - I deal with things like Pub 98, Pub 2000, etc. Sorry) 3. Have you checked the files on the new computer (within Windows Explorer) and made sure they are not read-only? 4. Is there any chance you can email me one of the questionable files? 5. I have to ask this question - Any chance you are getting Home Publishing and Publisher mixed up? It happens every now and then and sometimes you need to eliminate that fact. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... a memory stick. Mary did as you requested but still no joy, im running version 6 and the Archieve box is ticked "JoAnn Paules [MVP]" wrote: What's a POD? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Mary, thx for getting back to me, just tried your request and it didnt work i also checked the files and they are set as Archieve on the POD M "Mary Sauer" wrote: Copy the files over to your hard drive, try to open them again. The Publisher files maybe read only if they are stored on removable media. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi, just bought a new PC from Dell and trying to open several Publisher files from my old PC which i saved onto my POD, but the following msg comes up: publisher cannot open file from a different version, I dont have Norton (I have Mcafee) I have tried to save it as a duifferent Program with no success, the version i am using for publisher is version 6, please can someone help as and please use the idiots guide with me as im not that technically minded as you pro's, Cheers Maurizio |
#15
|
|||
|
|||
publisher cannot open file from a different version
Can we swap PC's please,
I have it on my Office 2000 CD that i bought ages ago, i just entered the CD and downloaded it as usual, as i did on my old PC, all the other different files that i have on my stick are all working ok ie Word, Excel etc "JoAnn Paules [MVP]" wrote: I was able to open the file with Pub 2003 without a problem. Then I remembered you said you used Pub 2000. I tried opening it with Pub 2000. Guess what - couldn't open it. Tried with Pub 2002 - opened just fine. Okay............if you have Publisher 2000, who created the file for you? :-) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... ok i'll send you an email asap, Read Only and Hidden were both clear. Numpty is the word of the day "JoAnn Paules [MVP]" wrote: A numpty? Never heard that one before. After the files are copied onto your new computer, open My Computer and located those files - but don't open them. Right click on the file name. Select Properties. Look at the bottom of that dialog box and if Read-Only is checked, clear it. Then try opening the file. If that doesn't work, send a file to jl dot paules at gmail dot com. (It's spelled out so I don't get blasted with spam.) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Hi JoAnn thx for getting back please be patient with me as im not very tech minded on PC's but not a total numpty, from the start, i have a new PC and from my old PC i was using Publisher 2000, i tranfered all my files over to my memory stick, then from my CD i downloaded office 2000 which has the same Publisher that i was using on my old PC, everything else works on my new PC ie Excel, windows etc but not Publisher. I have checked all the files on the stick and all of them have a tick by Archieve, i have also disabled AV and transfered all my have over to my hard drive and to no avail dont mind emailing you a file at all, what is your address please.. "JoAnn Paules [MVP]" wrote: Oh, just never heard of the terminology. I need to recap. You got a new computer. Both old and new computer have Publisher. You copied Pub files from old computer to storage device, you copied those files back onto the new computer. They won't open. You tried disabling AV. Still no success. A few questions: 1. Which version of Publisher is on the old computer? 2. Which version of Publisher is on the new computer? (Please don't say Version 6 - I deal with things like Pub 98, Pub 2000, etc. Sorry) 3. Have you checked the files on the new computer (within Windows Explorer) and made sure they are not read-only? 4. Is there any chance you can email me one of the questionable files? 5. I have to ask this question - Any chance you are getting Home Publishing and Publisher mixed up? It happens every now and then and sometimes you need to eliminate that fact. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... a memory stick. Mary did as you requested but still no joy, im running version 6 and the Archieve box is ticked "JoAnn Paules [MVP]" wrote: What's a POD? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Mary, thx for getting back to me, just tried your request and it didnt work i also checked the files and they are set as Archieve on the POD M "Mary Sauer" wrote: Copy the files over to your hard drive, try to open them again. The Publisher files maybe read only if they are stored on removable media. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi, just bought a new PC from Dell and trying to open several Publisher files from my old PC which i saved onto my POD, but the following msg comes up: publisher cannot open file from a different version, I dont have Norton (I have Mcafee) I have tried to save it as a duifferent Program with no success, the version i am using for publisher is version 6, please can someone help as and please use the idiots guide with me as im not that technically minded as you pro's, Cheers Maurizio |
#16
|
|||
|
|||
publisher cannot open file from a different version
Sure! My PC is a 6½ yr old P3-550. I'm sure I could make do with yours.
Did you double check the version on the old computer? Could you have obtained an upgrade on Office somewhere along the line? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Can we swap PC's please, I have it on my Office 2000 CD that i bought ages ago, i just entered the CD and downloaded it as usual, as i did on my old PC, all the other different files that i have on my stick are all working ok ie Word, Excel etc "JoAnn Paules [MVP]" wrote: I was able to open the file with Pub 2003 without a problem. Then I remembered you said you used Pub 2000. I tried opening it with Pub 2000. Guess what - couldn't open it. Tried with Pub 2002 - opened just fine. Okay............if you have Publisher 2000, who created the file for you? :-) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... ok i'll send you an email asap, Read Only and Hidden were both clear. Numpty is the word of the day "JoAnn Paules [MVP]" wrote: A numpty? Never heard that one before. After the files are copied onto your new computer, open My Computer and located those files - but don't open them. Right click on the file name. Select Properties. Look at the bottom of that dialog box and if Read-Only is checked, clear it. Then try opening the file. If that doesn't work, send a file to jl dot paules at gmail dot com. (It's spelled out so I don't get blasted with spam.) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Hi JoAnn thx for getting back please be patient with me as im not very tech minded on PC's but not a total numpty, from the start, i have a new PC and from my old PC i was using Publisher 2000, i tranfered all my files over to my memory stick, then from my CD i downloaded office 2000 which has the same Publisher that i was using on my old PC, everything else works on my new PC ie Excel, windows etc but not Publisher. I have checked all the files on the stick and all of them have a tick by Archieve, i have also disabled AV and transfered all my have over to my hard drive and to no avail dont mind emailing you a file at all, what is your address please.. "JoAnn Paules [MVP]" wrote: Oh, just never heard of the terminology. I need to recap. You got a new computer. Both old and new computer have Publisher. You copied Pub files from old computer to storage device, you copied those files back onto the new computer. They won't open. You tried disabling AV. Still no success. A few questions: 1. Which version of Publisher is on the old computer? 2. Which version of Publisher is on the new computer? (Please don't say Version 6 - I deal with things like Pub 98, Pub 2000, etc. Sorry) 3. Have you checked the files on the new computer (within Windows Explorer) and made sure they are not read-only? 4. Is there any chance you can email me one of the questionable files? 5. I have to ask this question - Any chance you are getting Home Publishing and Publisher mixed up? It happens every now and then and sometimes you need to eliminate that fact. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... a memory stick. Mary did as you requested but still no joy, im running version 6 and the Archieve box is ticked "JoAnn Paules [MVP]" wrote: What's a POD? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Mary, thx for getting back to me, just tried your request and it didnt work i also checked the files and they are set as Archieve on the POD M "Mary Sauer" wrote: Copy the files over to your hard drive, try to open them again. The Publisher files maybe read only if they are stored on removable media. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi, just bought a new PC from Dell and trying to open several Publisher files from my old PC which i saved onto my POD, but the following msg comes up: publisher cannot open file from a different version, I dont have Norton (I have Mcafee) I have tried to save it as a duifferent Program with no success, the version i am using for publisher is version 6, please can someone help as and please use the idiots guide with me as im not that technically minded as you pro's, Cheers Maurizio |
#17
|
|||
|
|||
publisher cannot open file from a different version
umm, no, you can keep your old PC, mines only 3 days old, so no deal there !
i was running the same version on the last pc, as it came from the same office 2000 CD that i bought. I may have to buy a new version as i need it for work and i also work half the time from home, if i do get another version what version do you recommend as you obviously know your stuff (probably 2003) M "JoAnn Paules [MVP]" wrote: Sure! My PC is a 6½ yr old P3-550. I'm sure I could make do with yours. Did you double check the version on the old computer? Could you have obtained an upgrade on Office somewhere along the line? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Can we swap PC's please, I have it on my Office 2000 CD that i bought ages ago, i just entered the CD and downloaded it as usual, as i did on my old PC, all the other different files that i have on my stick are all working ok ie Word, Excel etc "JoAnn Paules [MVP]" wrote: I was able to open the file with Pub 2003 without a problem. Then I remembered you said you used Pub 2000. I tried opening it with Pub 2000. Guess what - couldn't open it. Tried with Pub 2002 - opened just fine. Okay............if you have Publisher 2000, who created the file for you? :-) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... ok i'll send you an email asap, Read Only and Hidden were both clear. Numpty is the word of the day "JoAnn Paules [MVP]" wrote: A numpty? Never heard that one before. After the files are copied onto your new computer, open My Computer and located those files - but don't open them. Right click on the file name. Select Properties. Look at the bottom of that dialog box and if Read-Only is checked, clear it. Then try opening the file. If that doesn't work, send a file to jl dot paules at gmail dot com. (It's spelled out so I don't get blasted with spam.) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Hi JoAnn thx for getting back please be patient with me as im not very tech minded on PC's but not a total numpty, from the start, i have a new PC and from my old PC i was using Publisher 2000, i tranfered all my files over to my memory stick, then from my CD i downloaded office 2000 which has the same Publisher that i was using on my old PC, everything else works on my new PC ie Excel, windows etc but not Publisher. I have checked all the files on the stick and all of them have a tick by Archieve, i have also disabled AV and transfered all my have over to my hard drive and to no avail dont mind emailing you a file at all, what is your address please.. "JoAnn Paules [MVP]" wrote: Oh, just never heard of the terminology. I need to recap. You got a new computer. Both old and new computer have Publisher. You copied Pub files from old computer to storage device, you copied those files back onto the new computer. They won't open. You tried disabling AV. Still no success. A few questions: 1. Which version of Publisher is on the old computer? 2. Which version of Publisher is on the new computer? (Please don't say Version 6 - I deal with things like Pub 98, Pub 2000, etc. Sorry) 3. Have you checked the files on the new computer (within Windows Explorer) and made sure they are not read-only? 4. Is there any chance you can email me one of the questionable files? 5. I have to ask this question - Any chance you are getting Home Publishing and Publisher mixed up? It happens every now and then and sometimes you need to eliminate that fact. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... a memory stick. Mary did as you requested but still no joy, im running version 6 and the Archieve box is ticked "JoAnn Paules [MVP]" wrote: What's a POD? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Mary, thx for getting back to me, just tried your request and it didnt work i also checked the files and they are set as Archieve on the POD M "Mary Sauer" wrote: Copy the files over to your hard drive, try to open them again. The Publisher files maybe read only if they are stored on removable media. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi, just bought a new PC from Dell and trying to open several Publisher files from my old PC which i saved onto my POD, but the following msg comes up: publisher cannot open file from a different version, I dont have Norton (I have Mcafee) I have tried to save it as a duifferent Program with no success, the version i am using for publisher is version 6, please can someone help as and please use the idiots guide with me as im not that technically minded as you pro's, Cheers Maurizio |
#18
|
|||
|
|||
publisher cannot open file from a different version
DARN! Here I thought I was getting a new computer! ;-)
2003 because it's currently the latest version available. 2002 is okay but since it's already one version back, and not sold new any longer, I can't see starting out behind right from the get-go. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... umm, no, you can keep your old PC, mines only 3 days old, so no deal there ! i was running the same version on the last pc, as it came from the same office 2000 CD that i bought. I may have to buy a new version as i need it for work and i also work half the time from home, if i do get another version what version do you recommend as you obviously know your stuff (probably 2003) M "JoAnn Paules [MVP]" wrote: Sure! My PC is a 6½ yr old P3-550. I'm sure I could make do with yours. Did you double check the version on the old computer? Could you have obtained an upgrade on Office somewhere along the line? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Can we swap PC's please, I have it on my Office 2000 CD that i bought ages ago, i just entered the CD and downloaded it as usual, as i did on my old PC, all the other different files that i have on my stick are all working ok ie Word, Excel etc "JoAnn Paules [MVP]" wrote: I was able to open the file with Pub 2003 without a problem. Then I remembered you said you used Pub 2000. I tried opening it with Pub 2000. Guess what - couldn't open it. Tried with Pub 2002 - opened just fine. Okay............if you have Publisher 2000, who created the file for you? :-) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... ok i'll send you an email asap, Read Only and Hidden were both clear. Numpty is the word of the day "JoAnn Paules [MVP]" wrote: A numpty? Never heard that one before. After the files are copied onto your new computer, open My Computer and located those files - but don't open them. Right click on the file name. Select Properties. Look at the bottom of that dialog box and if Read-Only is checked, clear it. Then try opening the file. If that doesn't work, send a file to jl dot paules at gmail dot com. (It's spelled out so I don't get blasted with spam.) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Hi JoAnn thx for getting back please be patient with me as im not very tech minded on PC's but not a total numpty, from the start, i have a new PC and from my old PC i was using Publisher 2000, i tranfered all my files over to my memory stick, then from my CD i downloaded office 2000 which has the same Publisher that i was using on my old PC, everything else works on my new PC ie Excel, windows etc but not Publisher. I have checked all the files on the stick and all of them have a tick by Archieve, i have also disabled AV and transfered all my have over to my hard drive and to no avail dont mind emailing you a file at all, what is your address please.. "JoAnn Paules [MVP]" wrote: Oh, just never heard of the terminology. I need to recap. You got a new computer. Both old and new computer have Publisher. You copied Pub files from old computer to storage device, you copied those files back onto the new computer. They won't open. You tried disabling AV. Still no success. A few questions: 1. Which version of Publisher is on the old computer? 2. Which version of Publisher is on the new computer? (Please don't say Version 6 - I deal with things like Pub 98, Pub 2000, etc. Sorry) 3. Have you checked the files on the new computer (within Windows Explorer) and made sure they are not read-only? 4. Is there any chance you can email me one of the questionable files? 5. I have to ask this question - Any chance you are getting Home Publishing and Publisher mixed up? It happens every now and then and sometimes you need to eliminate that fact. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... a memory stick. Mary did as you requested but still no joy, im running version 6 and the Archieve box is ticked "JoAnn Paules [MVP]" wrote: What's a POD? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Mary, thx for getting back to me, just tried your request and it didnt work i also checked the files and they are set as Archieve on the POD M "Mary Sauer" wrote: Copy the files over to your hard drive, try to open them again. The Publisher files maybe read only if they are stored on removable media. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi, just bought a new PC from Dell and trying to open several Publisher files from my old PC which i saved onto my POD, but the following msg comes up: publisher cannot open file from a different version, I dont have Norton (I have Mcafee) I have tried to save it as a duifferent Program with no success, the version i am using for publisher is version 6, please can someone help as and please use the idiots guide with me as im not that technically minded as you pro's, Cheers Maurizio |
#19
|
|||
|
|||
publisher cannot open file from a different version
JoAnne, im looking at the Microsoft Download Centre website in order to
download Publisher 2003 would you recommend that i should do this please Link: http://www.microsoft.com/downloads/d...displaylang=en its saying that i can download for free, the file is called: PbWrdArt.exe M "JoAnn Paules [MVP]" wrote: DARN! Here I thought I was getting a new computer! ;-) 2003 because it's currently the latest version available. 2002 is okay but since it's already one version back, and not sold new any longer, I can't see starting out behind right from the get-go. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... umm, no, you can keep your old PC, mines only 3 days old, so no deal there ! i was running the same version on the last pc, as it came from the same office 2000 CD that i bought. I may have to buy a new version as i need it for work and i also work half the time from home, if i do get another version what version do you recommend as you obviously know your stuff (probably 2003) M "JoAnn Paules [MVP]" wrote: Sure! My PC is a 6½ yr old P3-550. I'm sure I could make do with yours. Did you double check the version on the old computer? Could you have obtained an upgrade on Office somewhere along the line? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Can we swap PC's please, I have it on my Office 2000 CD that i bought ages ago, i just entered the CD and downloaded it as usual, as i did on my old PC, all the other different files that i have on my stick are all working ok ie Word, Excel etc "JoAnn Paules [MVP]" wrote: I was able to open the file with Pub 2003 without a problem. Then I remembered you said you used Pub 2000. I tried opening it with Pub 2000. Guess what - couldn't open it. Tried with Pub 2002 - opened just fine. Okay............if you have Publisher 2000, who created the file for you? :-) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... ok i'll send you an email asap, Read Only and Hidden were both clear. Numpty is the word of the day "JoAnn Paules [MVP]" wrote: A numpty? Never heard that one before. After the files are copied onto your new computer, open My Computer and located those files - but don't open them. Right click on the file name. Select Properties. Look at the bottom of that dialog box and if Read-Only is checked, clear it. Then try opening the file. If that doesn't work, send a file to jl dot paules at gmail dot com. (It's spelled out so I don't get blasted with spam.) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Hi JoAnn thx for getting back please be patient with me as im not very tech minded on PC's but not a total numpty, from the start, i have a new PC and from my old PC i was using Publisher 2000, i tranfered all my files over to my memory stick, then from my CD i downloaded office 2000 which has the same Publisher that i was using on my old PC, everything else works on my new PC ie Excel, windows etc but not Publisher. I have checked all the files on the stick and all of them have a tick by Archieve, i have also disabled AV and transfered all my have over to my hard drive and to no avail dont mind emailing you a file at all, what is your address please.. "JoAnn Paules [MVP]" wrote: Oh, just never heard of the terminology. I need to recap. You got a new computer. Both old and new computer have Publisher. You copied Pub files from old computer to storage device, you copied those files back onto the new computer. They won't open. You tried disabling AV. Still no success. A few questions: 1. Which version of Publisher is on the old computer? 2. Which version of Publisher is on the new computer? (Please don't say Version 6 - I deal with things like Pub 98, Pub 2000, etc. Sorry) 3. Have you checked the files on the new computer (within Windows Explorer) and made sure they are not read-only? 4. Is there any chance you can email me one of the questionable files? 5. I have to ask this question - Any chance you are getting Home Publishing and Publisher mixed up? It happens every now and then and sometimes you need to eliminate that fact. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... a memory stick. Mary did as you requested but still no joy, im running version 6 and the Archieve box is ticked "JoAnn Paules [MVP]" wrote: What's a POD? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Mary, thx for getting back to me, just tried your request and it didnt work i also checked the files and they are set as Archieve on the POD M "Mary Sauer" wrote: Copy the files over to your hard drive, try to open them again. The Publisher files maybe read only if they are stored on removable media. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi, just bought a new PC from Dell and trying to open several Publisher files from my old PC which i saved onto my POD, but the following msg comes up: publisher cannot open file from a different version, I dont have Norton (I have Mcafee) I have tried to save it as a duifferent Program with no success, the version i am using for publisher is version 6, please can someone help as and please use the idiots guide with me as im not that technically minded as you pro's, Cheers Maurizio |
#20
|
|||
|
|||
publisher cannot open file from a different version
You can't download it. (That link is an add-in for WordArt within
Publisher.) You have to purchase it. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... JoAnne, im looking at the Microsoft Download Centre website in order to download Publisher 2003 would you recommend that i should do this please Link: http://www.microsoft.com/downloads/d...displaylang=en its saying that i can download for free, the file is called: PbWrdArt.exe M "JoAnn Paules [MVP]" wrote: DARN! Here I thought I was getting a new computer! ;-) 2003 because it's currently the latest version available. 2002 is okay but since it's already one version back, and not sold new any longer, I can't see starting out behind right from the get-go. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... umm, no, you can keep your old PC, mines only 3 days old, so no deal there ! i was running the same version on the last pc, as it came from the same office 2000 CD that i bought. I may have to buy a new version as i need it for work and i also work half the time from home, if i do get another version what version do you recommend as you obviously know your stuff (probably 2003) M "JoAnn Paules [MVP]" wrote: Sure! My PC is a 6½ yr old P3-550. I'm sure I could make do with yours. Did you double check the version on the old computer? Could you have obtained an upgrade on Office somewhere along the line? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Can we swap PC's please, I have it on my Office 2000 CD that i bought ages ago, i just entered the CD and downloaded it as usual, as i did on my old PC, all the other different files that i have on my stick are all working ok ie Word, Excel etc "JoAnn Paules [MVP]" wrote: I was able to open the file with Pub 2003 without a problem. Then I remembered you said you used Pub 2000. I tried opening it with Pub 2000. Guess what - couldn't open it. Tried with Pub 2002 - opened just fine. Okay............if you have Publisher 2000, who created the file for you? :-) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... ok i'll send you an email asap, Read Only and Hidden were both clear. Numpty is the word of the day "JoAnn Paules [MVP]" wrote: A numpty? Never heard that one before. After the files are copied onto your new computer, open My Computer and located those files - but don't open them. Right click on the file name. Select Properties. Look at the bottom of that dialog box and if Read-Only is checked, clear it. Then try opening the file. If that doesn't work, send a file to jl dot paules at gmail dot com. (It's spelled out so I don't get blasted with spam.) -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Hi JoAnn thx for getting back please be patient with me as im not very tech minded on PC's but not a total numpty, from the start, i have a new PC and from my old PC i was using Publisher 2000, i tranfered all my files over to my memory stick, then from my CD i downloaded office 2000 which has the same Publisher that i was using on my old PC, everything else works on my new PC ie Excel, windows etc but not Publisher. I have checked all the files on the stick and all of them have a tick by Archieve, i have also disabled AV and transfered all my have over to my hard drive and to no avail dont mind emailing you a file at all, what is your address please.. "JoAnn Paules [MVP]" wrote: Oh, just never heard of the terminology. I need to recap. You got a new computer. Both old and new computer have Publisher. You copied Pub files from old computer to storage device, you copied those files back onto the new computer. They won't open. You tried disabling AV. Still no success. A few questions: 1. Which version of Publisher is on the old computer? 2. Which version of Publisher is on the new computer? (Please don't say Version 6 - I deal with things like Pub 98, Pub 2000, etc. Sorry) 3. Have you checked the files on the new computer (within Windows Explorer) and made sure they are not read-only? 4. Is there any chance you can email me one of the questionable files? 5. I have to ask this question - Any chance you are getting Home Publishing and Publisher mixed up? It happens every now and then and sometimes you need to eliminate that fact. -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... a memory stick. Mary did as you requested but still no joy, im running version 6 and the Archieve box is ticked "JoAnn Paules [MVP]" wrote: What's a POD? -- JoAnn Paules MVP Microsoft [Publisher] "Maurizio" wrote in message ... Mary, thx for getting back to me, just tried your request and it didnt work i also checked the files and they are set as Archieve on the POD M "Mary Sauer" wrote: Copy the files over to your hard drive, try to open them again. The Publisher files maybe read only if they are stored on removable media. -- Mary Sauer MSFT MVP http://office.microsoft.com/ http://msauer.mvps.org/ news://msnews.microsoft.com "Maurizio" wrote in message ... Hi, just bought a new PC from Dell and trying to open several Publisher files from my old PC which i saved onto my POD, but the following msg comes up: publisher cannot open file from a different version, I dont have Norton (I have Mcafee) I have tried to save it as a duifferent Program with no success, the version i am using for publisher is version 6, please can someone help as and please use the idiots guide with me as im not that technically minded as you pro's, Cheers Maurizio |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Project Pro 2003 MSDN Install Fails | David N Murray | Setup, Installing & Configuration | 2 | February 27th, 2006 09:56 PM |
Multi-User vs Client/Server | GeorgieGirl | General Discussion | 3 | June 8th, 2005 11:42 PM |
Templates | gman | Page Layout | 17 | April 22nd, 2005 06:35 PM |
2 GB too large? | Matthias Vering | Publisher | 18 | July 21st, 2004 03:14 AM |
Productkey problem when installing office 2003 on network | Stefan Schreurs | Setup, Installing & Configuration | 1 | June 1st, 2004 11:16 PM |