If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
searching for names - multiple names per record
My database needs to track several names (first and last) for each record.
My initial database had all the names (first/last) in the main table. In an earlier request for help searching for lastnames, someone suggested that I put all the names in a separate Names table with a nameType comboBox. Now that I've modified my database to do that, I see that with that design I can only have one name per record. (To enter names, I select nameType, and then enter first/last names for that nameType. I have no way of entering/adding the first/lastnames for the other nameTypes. Each record has 5 or 6 first/last names to track. If they are all in one Names table, as suggested, I can only hold one nameType in each record. Can someone please suggest another way to solve my problem? TIA |
#2
|
|||
|
|||
searching for names - multiple names per record
You'd better explain your precise need, but in general, you wouldn't put
multiple names on a single record. Typically when you have multiple names on a single record, it means you've got field names like "Originator", "Approver", "Developer" etc. That's not a good idea: you're hiding data in the field names. Instead, you should keep the common information in the one table, and create a second table linked to that first table with one row for each name. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... My database needs to track several names (first and last) for each record. My initial database had all the names (first/last) in the main table. In an earlier request for help searching for lastnames, someone suggested that I put all the names in a separate Names table with a nameType comboBox. Now that I've modified my database to do that, I see that with that design I can only have one name per record. (To enter names, I select nameType, and then enter first/last names for that nameType. I have no way of entering/adding the first/lastnames for the other nameTypes. Each record has 5 or 6 first/last names to track. If they are all in one Names table, as suggested, I can only hold one nameType in each record. Can someone please suggest another way to solve my problem? TIA |
#3
|
|||
|
|||
searching for names - multiple names per record
Thanks, Doug, for responding.
By "create a second table linked to that first table with one row for each name" that I should have individual tables for each nameType? That is leave the mainTable with the common information, and then create a table for nameOriginator, a table for nameApprover, a table nameDeveloper, etc, with nameData for each of those nameTypes? "Douglas J. Steele" wrote in message ... You'd better explain your precise need, but in general, you wouldn't put multiple names on a single record. Typically when you have multiple names on a single record, it means you've got field names like "Originator", "Approver", "Developer" etc. That's not a good idea: you're hiding data in the field names. Instead, you should keep the common information in the one table, and create a second table linked to that first table with one row for each name. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... My database needs to track several names (first and last) for each record. My initial database had all the names (first/last) in the main table. In an earlier request for help searching for lastnames, someone suggested that I put all the names in a separate Names table with a nameType comboBox. Now that I've modified my database to do that, I see that with that design I can only have one name per record. (To enter names, I select nameType, and then enter first/last names for that nameType. I have no way of entering/adding the first/lastnames for the other nameTypes. Each record has 5 or 6 first/last names to track. If they are all in one Names table, as suggested, I can only hold one nameType in each record. Can someone please suggest another way to solve my problem? TIA |
#4
|
|||
|
|||
searching for names - multiple names per record
No, I don't think you should have a separate table for each name type. Have
a single name table with an additional column of NameType. That'll make queries like "Let me know all records that John Brown is involved with", "Let me know those records for which Mary Smith was the Approver" and "Let me know all records where the same person was the Developer and the Originator" much, much simpler. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, for responding. By "create a second table linked to that first table with one row for each name" that I should have individual tables for each nameType? That is leave the mainTable with the common information, and then create a table for nameOriginator, a table for nameApprover, a table nameDeveloper, etc, with nameData for each of those nameTypes? "Douglas J. Steele" wrote in message ... You'd better explain your precise need, but in general, you wouldn't put multiple names on a single record. Typically when you have multiple names on a single record, it means you've got field names like "Originator", "Approver", "Developer" etc. That's not a good idea: you're hiding data in the field names. Instead, you should keep the common information in the one table, and create a second table linked to that first table with one row for each name. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... My database needs to track several names (first and last) for each record. My initial database had all the names (first/last) in the main table. In an earlier request for help searching for lastnames, someone suggested that I put all the names in a separate Names table with a nameType comboBox. Now that I've modified my database to do that, I see that with that design I can only have one name per record. (To enter names, I select nameType, and then enter first/last names for that nameType. I have no way of entering/adding the first/lastnames for the other nameTypes. Each record has 5 or 6 first/last names to track. If they are all in one Names table, as suggested, I can only hold one nameType in each record. Can someone please suggest another way to solve my problem? TIA |
#5
|
|||
|
|||
searching for names - multiple names per record
Thanks, Doug, but I just don't get it. If I have a single table, with a col
for Nametype, a col for First, and a col for Last, how can I ever have more than one name per record? st. "Douglas J. Steele" wrote in message ... No, I don't think you should have a separate table for each name type. Have a single name table with an additional column of NameType. That'll make queries like "Let me know all records that John Brown is involved with", "Let me know those records for which Mary Smith was the Approver" and "Let me know all records where the same person was the Developer and the Originator" much, much simpler. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, for responding. By "create a second table linked to that first table with one row for each name" that I should have individual tables for each nameType? That is leave the mainTable with the common information, and then create a table for nameOriginator, a table for nameApprover, a table nameDeveloper, etc, with nameData for each of those nameTypes? "Douglas J. Steele" wrote in message ... You'd better explain your precise need, but in general, you wouldn't put multiple names on a single record. Typically when you have multiple names on a single record, it means you've got field names like "Originator", "Approver", "Developer" etc. That's not a good idea: you're hiding data in the field names. Instead, you should keep the common information in the one table, and create a second table linked to that first table with one row for each name. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... My database needs to track several names (first and last) for each record. My initial database had all the names (first/last) in the main table. In an earlier request for help searching for lastnames, someone suggested that I put all the names in a separate Names table with a nameType comboBox. Now that I've modified my database to do that, I see that with that design I can only have one name per record. (To enter names, I select nameType, and then enter first/last names for that nameType. I have no way of entering/adding the first/lastnames for the other nameTypes. Each record has 5 or 6 first/last names to track. If they are all in one Names table, as suggested, I can only hold one nameType in each record. Can someone please suggest another way to solve my problem? TIA |
#6
|
|||
|
|||
searching for names - multiple names per record
Actually, you need at least one additional field in the second table: the
link back to the first table. Let's assume you currently have Table1: Id Desc Originator Developer Approver 1 Project A Tom Jones Mary Brown John Doe 2 Project B Mary Brown Jill Roe Mary Smith 3 Project C John Brown John Brown Mary Smith with Id as the Primary Key. You'd change Table1 to: Id Desc 1 Project A 2 Project B 3 Project C still with Id as the Primary Key. and Table2 would be: Id NameType Person 1 Originator Tom Jones 1 Developer Mary Brown 1 Approver John Doe 2 Originator Mary Brown 2 Developer Jill Roe 2 Approver Mary Smith 3 Originator John Brown 3 Developer John Brown 3 Approver Mary Smith with the combination of Id and NameType as the Primary Key. (If you can have more than NameType for a particular item, you'd need more for the PK) Depending on your actual requirements, you could have a Person table, so that all you store in Table2 is the PersonId. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, but I just don't get it. If I have a single table, with a col for Nametype, a col for First, and a col for Last, how can I ever have more than one name per record? st. "Douglas J. Steele" wrote in message ... No, I don't think you should have a separate table for each name type. Have a single name table with an additional column of NameType. That'll make queries like "Let me know all records that John Brown is involved with", "Let me know those records for which Mary Smith was the Approver" and "Let me know all records where the same person was the Developer and the Originator" much, much simpler. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, for responding. By "create a second table linked to that first table with one row for each name" that I should have individual tables for each nameType? That is leave the mainTable with the common information, and then create a table for nameOriginator, a table for nameApprover, a table nameDeveloper, etc, with nameData for each of those nameTypes? "Douglas J. Steele" wrote in message ... You'd better explain your precise need, but in general, you wouldn't put multiple names on a single record. Typically when you have multiple names on a single record, it means you've got field names like "Originator", "Approver", "Developer" etc. That's not a good idea: you're hiding data in the field names. Instead, you should keep the common information in the one table, and create a second table linked to that first table with one row for each name. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... My database needs to track several names (first and last) for each record. My initial database had all the names (first/last) in the main table. In an earlier request for help searching for lastnames, someone suggested that I put all the names in a separate Names table with a nameType comboBox. Now that I've modified my database to do that, I see that with that design I can only have one name per record. (To enter names, I select nameType, and then enter first/last names for that nameType. I have no way of entering/adding the first/lastnames for the other nameTypes. Each record has 5 or 6 first/last names to track. If they are all in one Names table, as suggested, I can only hold one nameType in each record. Can someone please suggest another way to solve my problem? TIA |
#7
|
|||
|
|||
searching for names - multiple names per record
Thanks, Doug. I didn't know a primary key could be a combination of several
fields -- I thought it had to be a number field? And if I use your design, do I need a foreign key in Names table to connect (somehow) to the pk in the Projects table? "Douglas J. Steele" wrote in message ... Actually, you need at least one additional field in the second table: the link back to the first table. Let's assume you currently have Table1: Id Desc Originator Developer Approver 1 Project A Tom Jones Mary Brown John Doe 2 Project B Mary Brown Jill Roe Mary Smith 3 Project C John Brown John Brown Mary Smith with Id as the Primary Key. You'd change Table1 to: Id Desc 1 Project A 2 Project B 3 Project C still with Id as the Primary Key. and Table2 would be: Id NameType Person 1 Originator Tom Jones 1 Developer Mary Brown 1 Approver John Doe 2 Originator Mary Brown 2 Developer Jill Roe 2 Approver Mary Smith 3 Originator John Brown 3 Developer John Brown 3 Approver Mary Smith with the combination of Id and NameType as the Primary Key. (If you can have more than NameType for a particular item, you'd need more for the PK) Depending on your actual requirements, you could have a Person table, so that all you store in Table2 is the PersonId. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, but I just don't get it. If I have a single table, with a col for Nametype, a col for First, and a col for Last, how can I ever have more than one name per record? st. "Douglas J. Steele" wrote in message ... No, I don't think you should have a separate table for each name type. Have a single name table with an additional column of NameType. That'll make queries like "Let me know all records that John Brown is involved with", "Let me know those records for which Mary Smith was the Approver" and "Let me know all records where the same person was the Developer and the Originator" much, much simpler. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, for responding. By "create a second table linked to that first table with one row for each name" that I should have individual tables for each nameType? That is leave the mainTable with the common information, and then create a table for nameOriginator, a table for nameApprover, a table nameDeveloper, etc, with nameData for each of those nameTypes? "Douglas J. Steele" wrote in message ... You'd better explain your precise need, but in general, you wouldn't put multiple names on a single record. Typically when you have multiple names on a single record, it means you've got field names like "Originator", "Approver", "Developer" etc. That's not a good idea: you're hiding data in the field names. Instead, you should keep the common information in the one table, and create a second table linked to that first table with one row for each name. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... My database needs to track several names (first and last) for each record. My initial database had all the names (first/last) in the main table. In an earlier request for help searching for lastnames, someone suggested that I put all the names in a separate Names table with a nameType comboBox. Now that I've modified my database to do that, I see that with that design I can only have one name per record. (To enter names, I select nameType, and then enter first/last names for that nameType. I have no way of entering/adding the first/lastnames for the other nameTypes. Each record has 5 or 6 first/last names to track. If they are all in one Names table, as suggested, I can only hold one nameType in each record. Can someone please suggest another way to solve my problem? TIA |
#8
|
|||
|
|||
searching for names - multiple names per record
Realistically, a primary key is just an index, and any index can have up to
10 separate fields in it. Which design are you asking about "do I need a foreign key in Names table"? Are you talking about my comment at the end ("Depending on your actual requirements, you could have a Person table, so that all you store in Table2 is the PersonId."), or are you talking about Table2 in the example? Table2 must point to Table1, so yes, it must have a foreign key in it. If you're using "Names table" to refer to what I called "a Person table", then no: that table wouldn't have a foreign key in it. In essence you've got a many-to-many relationship between Table1 and the Names table. You create a third table that resolves the intersection of the two tables, and that intersection table consists of foreign keys pointing back to the other 2 tables. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... Thanks, Doug. I didn't know a primary key could be a combination of several fields -- I thought it had to be a number field? And if I use your design, do I need a foreign key in Names table to connect (somehow) to the pk in the Projects table? "Douglas J. Steele" wrote in message ... Actually, you need at least one additional field in the second table: the link back to the first table. Let's assume you currently have Table1: Id Desc Originator Developer Approver 1 Project A Tom Jones Mary Brown John Doe 2 Project B Mary Brown Jill Roe Mary Smith 3 Project C John Brown John Brown Mary Smith with Id as the Primary Key. You'd change Table1 to: Id Desc 1 Project A 2 Project B 3 Project C still with Id as the Primary Key. and Table2 would be: Id NameType Person 1 Originator Tom Jones 1 Developer Mary Brown 1 Approver John Doe 2 Originator Mary Brown 2 Developer Jill Roe 2 Approver Mary Smith 3 Originator John Brown 3 Developer John Brown 3 Approver Mary Smith with the combination of Id and NameType as the Primary Key. (If you can have more than NameType for a particular item, you'd need more for the PK) Depending on your actual requirements, you could have a Person table, so that all you store in Table2 is the PersonId. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, but I just don't get it. If I have a single table, with a col for Nametype, a col for First, and a col for Last, how can I ever have more than one name per record? st. "Douglas J. Steele" wrote in message ... No, I don't think you should have a separate table for each name type. Have a single name table with an additional column of NameType. That'll make queries like "Let me know all records that John Brown is involved with", "Let me know those records for which Mary Smith was the Approver" and "Let me know all records where the same person was the Developer and the Originator" much, much simpler. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, for responding. By "create a second table linked to that first table with one row for each name" that I should have individual tables for each nameType? That is leave the mainTable with the common information, and then create a table for nameOriginator, a table for nameApprover, a table nameDeveloper, etc, with nameData for each of those nameTypes? "Douglas J. Steele" wrote in message ... You'd better explain your precise need, but in general, you wouldn't put multiple names on a single record. Typically when you have multiple names on a single record, it means you've got field names like "Originator", "Approver", "Developer" etc. That's not a good idea: you're hiding data in the field names. Instead, you should keep the common information in the one table, and create a second table linked to that first table with one row for each name. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... My database needs to track several names (first and last) for each record. My initial database had all the names (first/last) in the main table. In an earlier request for help searching for lastnames, someone suggested that I put all the names in a separate Names table with a nameType comboBox. Now that I've modified my database to do that, I see that with that design I can only have one name per record. (To enter names, I select nameType, and then enter first/last names for that nameType. I have no way of entering/adding the first/lastnames for the other nameTypes. Each record has 5 or 6 first/last names to track. If they are all in one Names table, as suggested, I can only hold one nameType in each record. Can someone please suggest another way to solve my problem? TIA |
#9
|
|||
|
|||
searching for names - multiple names per record
Thanks so much, Doug. I have tried to re-do my database to meet your
suggestions. I have a Table1 and Table 2, as you've outlined. Now, I need direction on how to make a third table "that resolves the intersection of the two tables". I just don't quite get the foreign key deal. TIA "Douglas J. Steele" wrote in message ... Realistically, a primary key is just an index, and any index can have up to 10 separate fields in it. Which design are you asking about "do I need a foreign key in Names table"? Are you talking about my comment at the end ("Depending on your actual requirements, you could have a Person table, so that all you store in Table2 is the PersonId."), or are you talking about Table2 in the example? Table2 must point to Table1, so yes, it must have a foreign key in it. If you're using "Names table" to refer to what I called "a Person table", then no: that table wouldn't have a foreign key in it. In essence you've got a many-to-many relationship between Table1 and the Names table. You create a third table that resolves the intersection of the two tables, and that intersection table consists of foreign keys pointing back to the other 2 tables. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... Thanks, Doug. I didn't know a primary key could be a combination of several fields -- I thought it had to be a number field? And if I use your design, do I need a foreign key in Names table to connect (somehow) to the pk in the Projects table? "Douglas J. Steele" wrote in message ... Actually, you need at least one additional field in the second table: the link back to the first table. Let's assume you currently have Table1: Id Desc Originator Developer Approver 1 Project A Tom Jones Mary Brown John Doe 2 Project B Mary Brown Jill Roe Mary Smith 3 Project C John Brown John Brown Mary Smith with Id as the Primary Key. You'd change Table1 to: Id Desc 1 Project A 2 Project B 3 Project C still with Id as the Primary Key. and Table2 would be: Id NameType Person 1 Originator Tom Jones 1 Developer Mary Brown 1 Approver John Doe 2 Originator Mary Brown 2 Developer Jill Roe 2 Approver Mary Smith 3 Originator John Brown 3 Developer John Brown 3 Approver Mary Smith with the combination of Id and NameType as the Primary Key. (If you can have more than NameType for a particular item, you'd need more for the PK) Depending on your actual requirements, you could have a Person table, so that all you store in Table2 is the PersonId. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, but I just don't get it. If I have a single table, with a col for Nametype, a col for First, and a col for Last, how can I ever have more than one name per record? st. "Douglas J. Steele" wrote in message ... No, I don't think you should have a separate table for each name type. Have a single name table with an additional column of NameType. That'll make queries like "Let me know all records that John Brown is involved with", "Let me know those records for which Mary Smith was the Approver" and "Let me know all records where the same person was the Developer and the Originator" much, much simpler. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, for responding. By "create a second table linked to that first table with one row for each name" that I should have individual tables for each nameType? That is leave the mainTable with the common information, and then create a table for nameOriginator, a table for nameApprover, a table nameDeveloper, etc, with nameData for each of those nameTypes? "Douglas J. Steele" wrote in message ... You'd better explain your precise need, but in general, you wouldn't put multiple names on a single record. Typically when you have multiple names on a single record, it means you've got field names like "Originator", "Approver", "Developer" etc. That's not a good idea: you're hiding data in the field names. Instead, you should keep the common information in the one table, and create a second table linked to that first table with one row for each name. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... My database needs to track several names (first and last) for each record. My initial database had all the names (first/last) in the main table. In an earlier request for help searching for lastnames, someone suggested that I put all the names in a separate Names table with a nameType comboBox. Now that I've modified my database to do that, I see that with that design I can only have one name per record. (To enter names, I select nameType, and then enter first/last names for that nameType. I have no way of entering/adding the first/lastnames for the other nameTypes. Each record has 5 or 6 first/last names to track. If they are all in one Names table, as suggested, I can only hold one nameType in each record. Can someone please suggest another way to solve my problem? TIA |
#10
|
|||
|
|||
searching for names - multiple names per record
I may have confused you.
If you've got Table1 and Table2 as I described them, that's essentially all you need. I'd suggested an extension of that if you had a Person table: Id Person 1 Tom Jones 2 Mary Brown 3 John Doe 4 Jill Roe 5 Mary Smith 6 John Brown Then, instead of Table2 being Id NameType Person 1 Originator Tom Jones 1 Developer Mary Brown 1 Approver John Doe 2 Originator Mary Brown 2 Developer Jill Roe 2 Approver Mary Smith 3 Originator John Brown 3 Developer John Brown 3 Approver Mary Smith it would be Id NameType Person 1 Originator 1 1 Developer 2 1 Approver 3 2 Originator 2 2 Developer 4 2 Approver 5 3 Originator 6 3 Developer 6 3 Approver 5 -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks so much, Doug. I have tried to re-do my database to meet your suggestions. I have a Table1 and Table 2, as you've outlined. Now, I need direction on how to make a third table "that resolves the intersection of the two tables". I just don't quite get the foreign key deal. TIA "Douglas J. Steele" wrote in message ... Realistically, a primary key is just an index, and any index can have up to 10 separate fields in it. Which design are you asking about "do I need a foreign key in Names table"? Are you talking about my comment at the end ("Depending on your actual requirements, you could have a Person table, so that all you store in Table2 is the PersonId."), or are you talking about Table2 in the example? Table2 must point to Table1, so yes, it must have a foreign key in it. If you're using "Names table" to refer to what I called "a Person table", then no: that table wouldn't have a foreign key in it. In essence you've got a many-to-many relationship between Table1 and the Names table. You create a third table that resolves the intersection of the two tables, and that intersection table consists of foreign keys pointing back to the other 2 tables. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... Thanks, Doug. I didn't know a primary key could be a combination of several fields -- I thought it had to be a number field? And if I use your design, do I need a foreign key in Names table to connect (somehow) to the pk in the Projects table? "Douglas J. Steele" wrote in message ... Actually, you need at least one additional field in the second table: the link back to the first table. Let's assume you currently have Table1: Id Desc Originator Developer Approver 1 Project A Tom Jones Mary Brown John Doe 2 Project B Mary Brown Jill Roe Mary Smith 3 Project C John Brown John Brown Mary Smith with Id as the Primary Key. You'd change Table1 to: Id Desc 1 Project A 2 Project B 3 Project C still with Id as the Primary Key. and Table2 would be: Id NameType Person 1 Originator Tom Jones 1 Developer Mary Brown 1 Approver John Doe 2 Originator Mary Brown 2 Developer Jill Roe 2 Approver Mary Smith 3 Originator John Brown 3 Developer John Brown 3 Approver Mary Smith with the combination of Id and NameType as the Primary Key. (If you can have more than NameType for a particular item, you'd need more for the PK) Depending on your actual requirements, you could have a Person table, so that all you store in Table2 is the PersonId. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, but I just don't get it. If I have a single table, with a col for Nametype, a col for First, and a col for Last, how can I ever have more than one name per record? st. "Douglas J. Steele" wrote in message ... No, I don't think you should have a separate table for each name type. Have a single name table with an additional column of NameType. That'll make queries like "Let me know all records that John Brown is involved with", "Let me know those records for which Mary Smith was the Approver" and "Let me know all records where the same person was the Developer and the Originator" much, much simpler. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no e-mails, please!) "zSplash" wrote in message ... Thanks, Doug, for responding. By "create a second table linked to that first table with one row for each name" that I should have individual tables for each nameType? That is leave the mainTable with the common information, and then create a table for nameOriginator, a table for nameApprover, a table nameDeveloper, etc, with nameData for each of those nameTypes? "Douglas J. Steele" wrote in message ... You'd better explain your precise need, but in general, you wouldn't put multiple names on a single record. Typically when you have multiple names on a single record, it means you've got field names like "Originator", "Approver", "Developer" etc. That's not a good idea: you're hiding data in the field names. Instead, you should keep the common information in the one table, and create a second table linked to that first table with one row for each name. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "zSplash" wrote in message ... My database needs to track several names (first and last) for each record. My initial database had all the names (first/last) in the main table. In an earlier request for help searching for lastnames, someone suggested that I put all the names in a separate Names table with a nameType comboBox. Now that I've modified my database to do that, I see that with that design I can only have one name per record. (To enter names, I select nameType, and then enter first/last names for that nameType. I have no way of entering/adding the first/lastnames for the other nameTypes. Each record has 5 or 6 first/last names to track. If they are all in one Names table, as suggested, I can only hold one nameType in each record. Can someone please suggest another way to solve my problem? TIA |
Thread Tools | |
Display Modes | |
|
|