If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Master Slide
Can you please tell me how to remove one image from the master slide for one indivudal slide?
|
#2
|
|||
|
|||
Master Slide
Depends on which version of PowerPoint you are using.
If you are using PowerPoint 2002 or 2003, you can set up a second master that doesn't include the element(s) you don't want. If you are using one of the earlier versions, you will have to fake the effect. To fake it, you need to select and copy all the elements from the master slide except the one you don't want. Now, go to your slide, right click and bring up the background dialog. Check ""Exclude Background Objects". When you click ok, you will have a blank slide. Onto that slide, paste the elements you copied from the master slide. Hope this helps! -- Kathryn Jacobs, Microsoft MVP PowerPoint and OneNote Get PowerPoint answers at http://www.powerpointanswers.com Cook anything outdoors with http://www.outdoorcook.com Get OneNote answers at http://www.onenoteanswers.com If this helped you, please take the time to rate the value of this post: http://rate.affero.net/jacobskl/ I believe life is meant to be lived. But: if we live without making a difference, it makes no difference that we lived "Katherine Wilson" wrote in message ... Can you please tell me how to remove one image from the master slide for one indivudal slide? |
#3
|
|||
|
|||
Master Slide
Depending on how complicated things are, you might be able to simply
cover up the unwanted element with a rectangle that is the same color as your background. This won't work if the element is animated, but I use this all the time. For example, if I have a navigation bar with buttons for back, next, and home, I can slap a rectangle over the next button on the last slide. --David -- David M. Marcovitz, Ph.D. Director of Graduate Programs in Educational Technology Loyola College in Maryland Author of _Powerful PowerPoint for Educators_ http://www.loyola.edu/education/PowerfulPowerPoint/ "Kathy J" wrote in : Depends on which version of PowerPoint you are using. If you are using PowerPoint 2002 or 2003, you can set up a second master that doesn't include the element(s) you don't want. If you are using one of the earlier versions, you will have to fake the effect. To fake it, you need to select and copy all the elements from the master slide except the one you don't want. Now, go to your slide, right click and bring up the background dialog. Check ""Exclude Background Objects". When you click ok, you will have a blank slide. Onto that slide, paste the elements you copied from the master slide. Hope this helps! |
#4
|
|||
|
|||
Master Slide
In article 6, David M.
Marcovitz wrote: Depending on how complicated things are, you might be able to simply cover up the unwanted element with a rectangle that is the same color as your background. This won't work if the element is animated, but I use this all the time. For example, if I have a navigation bar with buttons for back, next, and home, I can slap a rectangle over the next button on the last slide. And a weird little addition to that trick ... Echo told me about this one, I think: Rightclick or doubleclick the rectangle to bring up the formatting dialog box. Can't do this from the popup fill gadget at the bottom of the screen for some odd reason. Click the down-arrow next to fill color and at the very bottom of the list of possibilities, there's "Background". Click that. The rectangle will now take on whatever color the background gets. No big whoop, right? But it'll inherit the fill from whatever portion of the b/g it's sitting over ... meaning that you can now use it to hide things even on gradient, textured or other non-flat-color backgrounds. Whoop. BIG whoop. ;-) -- Steve Rindsberg, PPT MVP PPT FAQ: www.pptfaq.com PPTools: www.pptools.com ================================================ Featured Presenter, PowerPoint Live 2004 October 10-13, San Diego, CA www.PowerPointLive.com ================================================ |
#5
|
|||
|
|||
Master Slide
That one's today's gem!! Wowzer!!!
"Steve Rindsberg" wrote in message ... In article 6, David M. Marcovitz wrote: Depending on how complicated things are, you might be able to simply cover up the unwanted element with a rectangle that is the same color as your background. This won't work if the element is animated, but I use this all the time. For example, if I have a navigation bar with buttons for back, next, and home, I can slap a rectangle over the next button on the last slide. And a weird little addition to that trick ... Echo told me about this one, I think: Rightclick or doubleclick the rectangle to bring up the formatting dialog box. Can't do this from the popup fill gadget at the bottom of the screen for some odd reason. Click the down-arrow next to fill color and at the very bottom of the list of possibilities, there's "Background". Click that. The rectangle will now take on whatever color the background gets. No big whoop, right? But it'll inherit the fill from whatever portion of the b/g it's sitting over .. meaning that you can now use it to hide things even on gradient, textured or other non-flat-color backgrounds. Whoop. BIG whoop. ;-) -- Steve Rindsberg, PPT MVP PPT FAQ: www.pptfaq.com PPTools: www.pptools.com ================================================ Featured Presenter, PowerPoint Live 2004 October 10-13, San Diego, CA www.PowerPointLive.com ================================================ |
#6
|
|||
|
|||
Master Slide
In article , Sonia wrote:
That one's today's gem!! Wowzer!!! Pity it doesn't work for picture b/g fills, but for grads and textures, it's a lifesaver, eh? -- Steve Rindsberg, PPT MVP PPT FAQ: www.pptfaq.com PPTools: www.pptools.com ================================================ Featured Presenter, PowerPoint Live 2004 October 10-13, San Diego, CA www.PowerPointLive.com ================================================ |
#7
|
|||
|
|||
Master Slide
Oh, but it does work for picture backgrounds, whether the picture is
inserted in the background of the Slide Master or if it is applied only to a single slide via Format Background!! Have you tried it? "Steve Rindsberg" wrote in message ... In article , Sonia wrote: That one's today's gem!! Wowzer!!! Pity it doesn't work for picture b/g fills, but for grads and textures, it's a lifesaver, eh? -- Steve Rindsberg, PPT MVP PPT FAQ: www.pptfaq.com PPTools: www.pptools.com ================================================ Featured Presenter, PowerPoint Live 2004 October 10-13, San Diego, CA www.PowerPointLive.com ================================================ |
#8
|
|||
|
|||
Master Slide
Try it. And then move the object. It appears to be transparent. But it
isn't. Move it to the left halfway off the slide and the part that hangs off is filled with the right hand side of the background. Move it halfway off the top of the slide and the overhanging part is filled from the bottom of the background image. Copy and paste it to a slide with a different background and it contains *that* background. Great fun. Can't think of what to do with it, but it's fun. "Steve Rindsberg" wrote in message ... In article , Sonia wrote: That one's today's gem!! Wowzer!!! Pity it doesn't work for picture b/g fills, but for grads and textures, it's a lifesaver, eh? -- Steve Rindsberg, PPT MVP PPT FAQ: www.pptfaq.com PPTools: www.pptools.com ================================================ Featured Presenter, PowerPoint Live 2004 October 10-13, San Diego, CA www.PowerPointLive.com ================================================ |
#9
|
|||
|
|||
Master Slide
Yeah, it is fun.
Oh, but it does work for picture backgrounds, whether the picture is inserted in the background of the Slide Master or if it is applied only to a single slide via Format Background!! Have you tried it? It depends on which version of PPT you're using, and I'm pretty sure Steve and I were poking at 2000 when I told him about this. Hang on a sec... PPT 2000, format/background/fill effects/picture on individual slide -- background-filled object is a miniature of the image on the slide PPT 2000, format/background/fill effects/picture on the slide master -- background-filled object is a miniature of the image on the slide Yeah. It didn't work with images in PPT 2000 -- only gradient fills. Maybe also textures or patterns, but I don't remember for sure. PPT 2002/2003, format/background/fill effects/picture on individual slide -- background-filled object seems transparent on the slide PPT 2002/2003, format/background/fill effects/picture on the slide master -- background-filled object is a crappy brown/orange! So MS added image functionality to this feature as of PPT 2002. Not sure why I'm seeing crappy brown and orange when using an image inserted on the slide master, but it's probably something to do with my video driver. I know that in the Format Object dialog box, the fill shows as the background image the way it should. Try it. And then move the object. It appears to be transparent. But it isn't. Move it to the left halfway off the slide and the part that hangs off is filled with the right hand side of the background. Move it halfway off the top of the slide and the overhanging part is filled from the bottom of the background image. I think this extra fill is probably a video driver/display issue, because that doesn't happen here. I see transparent areas on the parts of my object that hang off the slide. Always have, as far as I can remember. Copy and paste it to a slide with a different background and it contains *that* background. Yeah, that does work. Great fun. Can't think of what to do with it, but it's fun. Well, for one, it's handy for covering up text (for instance, an extraneous axis label on a graph) when you have a gradient or picture background. Echo |
#10
|
|||
|
|||
Master Slide
Your video driver must need updating. The object isn't transparent. I see
the background image, even when I move it off the slide. If it were transparent it wouldn't cover anything. I tested on three different systems. "Echo S" wrote in message ... Yeah, it is fun. Oh, but it does work for picture backgrounds, whether the picture is inserted in the background of the Slide Master or if it is applied only to a single slide via Format Background!! Have you tried it? It depends on which version of PPT you're using, and I'm pretty sure Steve and I were poking at 2000 when I told him about this. Hang on a sec... PPT 2000, format/background/fill effects/picture on individual slide -- background-filled object is a miniature of the image on the slide PPT 2000, format/background/fill effects/picture on the slide master -- background-filled object is a miniature of the image on the slide Yeah. It didn't work with images in PPT 2000 -- only gradient fills. Maybe also textures or patterns, but I don't remember for sure. PPT 2002/2003, format/background/fill effects/picture on individual slide -- background-filled object seems transparent on the slide PPT 2002/2003, format/background/fill effects/picture on the slide master -- background-filled object is a crappy brown/orange! So MS added image functionality to this feature as of PPT 2002. Not sure why I'm seeing crappy brown and orange when using an image inserted on the slide master, but it's probably something to do with my video driver. I know that in the Format Object dialog box, the fill shows as the background image the way it should. Try it. And then move the object. It appears to be transparent. But it isn't. Move it to the left halfway off the slide and the part that hangs off is filled with the right hand side of the background. Move it halfway off the top of the slide and the overhanging part is filled from the bottom of the background image. I think this extra fill is probably a video driver/display issue, because that doesn't happen here. I see transparent areas on the parts of my object that hang off the slide. Always have, as far as I can remember. Copy and paste it to a slide with a different background and it contains *that* background. Yeah, that does work. Great fun. Can't think of what to do with it, but it's fun. Well, for one, it's handy for covering up text (for instance, an extraneous axis label on a graph) when you have a gradient or picture background. Echo |
Thread Tools | |
Display Modes | |
|
|